Search
Make A Payment
My Cart
Login
WORLDWIDE SHIPPING
Call 800-404-2832
800-404-2832
+800 0404 2832 International
A2LA
ISO
Home
Products
Categories
Manufacturers
Industries & Solutions
Test Standards
EMC
Power Supplies & Loads
Communications
Electrical
Environmental Health & Safety
Environmental Simulation
NDT Inspection
General Purpose
View All »
EMC
Radiated Immunity
Amplifiers
EMC Antennas
EMP Generators
RF Components
RF Shielded Enclosures
RF Power Meters
RF Signal Generators
Radiated Emissions
EMC Antennas
EMI Receivers
EMI Scanners
Near Field Probes
RF Preamplifiers
RF Shielded Enclosures
Spectrum Analyzers
Conducted Emissions
EMI Receivers
Harmonics & Flicker
LISNs
RF Current Probes
Spectrum Analyzers
Transient Limiters
Conducted Immunity
Automotive Transient Generators
Conducted LF/RF Immunity
ESD Guns
Indirect Lightning Test Systems
Military & Aerospace Transient Generators
Transient Generators
Coupling Decoupling Network
Bulk Current Injection Probes
Power Supplies & Loads
AC
AC Loads
AC Power Supplies
Grid Simulators
Precision Power Analyzers
Variable Transformers
DC
DC Loads
DC Power Supplies
Precision Power Analyzers
Solar Array Simulators
High Voltage DC Power Supply
Bidirectional Power Supplies
Battery Testing
Battery Pack Test Systems
Battery Module Testers
Battery Cell Testers
DC Loads
EV Charger Testers | EVSE Test Equipment
Potentiostats | Galvanostats
Battery Diagnostic Tools
Communications
Cellular Network
CW Transmitters
Antenna Alignment Tools (AAT)
Handheld Cable and Antenna Analyzers
Fiber Test Kits
Gauss Meters
PIM Testers
Personal RF Monitors
Spectrum Analyzers
Drive & Walk Testers
Data Network
Laser Power Meters
Fiber Testers
Fusion Splicers
LAN Cable Certifiers
OTDRs
SONET Test Sets | SDH
Ethernet IP Network Testers
DWDM & CWDM OTDRs
Wifi Testers
Radio Network
Audio Analyzers
RF Interference Hunting Equipment
Land-Mobile Radio System Modulation Analyzers
Lock-in Amplifiers
Digital Radio Test Sets
Spectrum Analyzers
Wireless Communications Test Sets
Flight Line Test Sets
Signal Analysis
Bit Error Rate Testers (BERT)
RF Direction Finders
Noise Figure Analyzers and Sources
Oscilloscopes
Pulse Pattern Generators
RF Power Meters
RF Signal Generators
Spectrum Analyzers
Vector Network Analyzers
Vector Signal Generators (VSG)
GNSS Simulators
Frequency Counters
Electrical
Facility Power Testing
Power Quality
Ground Resistance Testers
Power Loggers
Scope Meters
Photovoltaic Testers
Thermal & Infrared Cameras
Underground Cable Locators
Industrial Electrical Testing
Borescopes
Vibration Analyzers
DLRO (Ductors)
Hipot Testers
Megohmmeters | Insulation Testers
Laser Alignment Tools
Motor Analyzers
Sound Level Meters
Thermal & Infrared Cameras
Bond Testers
Acoustic Cameras
Vacuum Interrupter Testers
Substation & Transformer Testing
Current Transformer (CT) Testers
Oil Dielectric Testers
Partial Discharge Testers
Power Factor Test Sets | Tan Delta
Protective Relay Test Sets
Sweep Frequency Response Analyzers
Circuit Breaker Testing Equipment
Transformer Turns Ratio (TTR) Testers
Winding Resistance Meters
Transmission Line Testing
AC Hipot Testers
Cable Fault Locators
Time Domain Reflectometers (TDR)
DC Hipot Testers
Partial Discharge Testers
Power Factor Test Sets | Tan Delta
VLF Cable Testers
Environmental Health & Safety
Air Monitoring
Gas Analyzers
Particle Counters
Dew Point Meters
Confined Space Gas Monitors
Gas Area Monitors
Industrial Hygiene
Radiation Meters
Gauss Meters
Sound Level Meters
Monitoring and Inspection
Ultrasonic Flow Meters
Helium Leak Detector
Light & Color Meters
Thermal & Infrared Cameras
RF Safety
Personal RF Monitors
RF Survey Meters
Area Monitors
Spectrum Analyzers
Environmental Simulation
Environmental Chambers
Benchtop Chambers
HAST Chambers
Stability Chambers
Temperature & Humidity Chambers
Thermal Chambers
Thermal Shock Chambers
Vacuum Drying Ovens
HALT Chambers
Temperature Cycling Chambers
Arc Test Chambers
Temperature Testing
Industrial Ovens | Furnaces
Recirculating Chillers
Thermal Chambers
Temperature Forcing Systems
Temperature Cycling Chambers
Arc Test Chambers
Motion Testing
Force Testers
Particle Impact Noise Detection (PIND)
Shaker Systems
Shock Testers
NDT Inspection
Materials Testing
Coordinate Measuring Machines (CMM)
Ionographs
Laser Micrometers
Roughness Testers
Ultrasonic Thickness Gauges
Ultrasonic Flaw Detectors
XRF Analyzers
Ground Penetrating Radar (GPR)
Hardness Testers
Accelerometers
Particle Impact Noise Detection (PIND)
Laser Doppler Vibrometers
Eddy Current Flaw Detectors
LIBS Analyzers
Moisture Meters
Condition Monitoring
Pipe Cameras
Borescopes
Vibration Analyzers
Accelerometers
Laser Alignment Tools
Sound Level Meters
Visual Inspection
Pipe Cameras
Digital Microscopes
Borescopes
High-Speed Cameras
Thermal & Infrared Cameras
Acoustic Cameras
3D Laser Scanners
Infrared Pyrometers
Moisture Meters
General Purpose
Calibrators
Digital Multimeters
Electrical Calibrators
Electrical Standards
HART Field Communicators
Multifunction Process Calibrators
Pressure Calibrators
Temperature Calibrators
Deadweight Testers
Calibration Hand Pumps
Pressure Modules
Frequency References
Humidity Calibrators
Vibration Calibrators
Gas Calibrators
Pressure Gauges
Component Testing
Benchtop Power Supplies
Digital Multimeters
Electrical Safety Analyzers
Function Generators
Impedance Analyzers
LCR Meters
Oscilloscopes
Precision Power Analyzers
RF Signal Generators
Semiconductor Parameter Analyzers
Source Measure Units (SMU)
Spectrum Analyzers
Vector Network Analyzers
Vector Signal Generators (VSG)
Industrial CT Scanners
Circuit Board Testers
Data Acquisition
Data Loggers
Scopecorders
Signal Conditioners
3Z Telecom
Additel
Advanced Amplifiers
AE Techron
AEMC
Aeroflex
Amplifier Research
Anritsu
Baker Instruments
Bruel & Kjaer
California Instruments
Chroma
Cincinnati Sub-Zero
Com-Power
Doble
Dranetz
EM Test
EMC Partner
Emerson
Empower
ESDEMC
Espec
Evident
EXFO
FieldSense
FLIR Systems
Fluke Calibration
Fluke
Fluke Networks
Haefely
High Voltage Inc.
Hirayama
Instruments for Industry (IFI)
inTEST Thermal Solutions
Keithley
Keysight
Kikusui
LeCroy
Magna-Power Electronics
Megger
Mitutoyo
mPower Electronics Inc.
Narda STS
NetScout Systems
NH Research
NoiseKen
OMICRON
Ophir
Pacific Power Source
Phenix
Preen
Rohde & Schwarz
Solmetric
Sorensen
Sumitomo
Tektronix
Tesco
Teseq
Thermotron
Viavi Solutions
VibrAlign
Yokogawa
View All »
Industries
5G
Communications
Environmental Health & Safety
Defense
Electrical
Hydro Power
Solutions
Choosing an Environmental Chamber
Clean Room Testing
Electrostatic Discharge (ESD) Testing
What is EMI/EMC Testing?
Automotive EMC Test Equipment
Fiber Testing
How to Use a Laser Alignment Tool
Multipaction Testing
NDT | Non-Destructive Testing
Power Quality Instrument Selection Guide
Substation Maintenance
Cell Tower Testing
Building Envelope Testing
HIRF Testing
What is XRF Testing?
Battery Testing Equipment
How to Splice Fiber Optic Cables
What Is OTDR Testing?
What Is A Direction Finder?
How to Find RF Interference
What is RF Spectrum Monitoring?
What Is Drone Detection Equipment?
What Is an RF Amplifier?
Workplace Health & Safety Equipment
Using A Visual Inspection Camera
What Is A High Precision Power Analyzer?
What is VLF Cable Testing?
What is PIND Testing?
Aircraft EMC Testing
What Is Material Testing?
What Is PIM Mitigation?
Doble’s Original Power Factor Test
AEN Standards
Airbus Standards
ANSI/ASA Standards
ANSI/BICSI Standards
ANSI/IEEE Standards
ANSI/SCTE Standards
ANSI/TIA Standards
ASTM Standards
Boeing Standards
CE Marking
DaimlerChrysler Standards
ECE Standards
EN Standards
EPA Standards
EU Directive Standards
EUROCAE Standards
FCC Standards
Fiat Standards
Ford Standards
GM Standards
ICNIRP Standards
IEC CISPR Standards
IEC Standards
ISO Standards
Health Canada Standards
ISO/IEC 17025:2017 Accreditation
ISTA Standards
ITU-T Standards
JASO Standards
LV Standards
Mercedes-Benz Standards
NEBS Standards (Network Equipment Building System)
NERC/FERC Standards
JEDEC Standards
MIL Standards
Peugeot Standards
Renault Standards
RTCA/DO-160
SAE Standards
TIA-EIA Standards
UL Standards
Military Guidelines
IEEE Standards
View All »
Request A Quote
Calibration
Contact Us
NARDA STS
Search:
Search
Manufacturer:
Com-Power
Com-Power Corporation manufactures LISNs, CDNs, preamplifiers, broadband antennas, and a variety of other types of EMC test equipment designed to offer customers the best performance specifications in the industry for the best price. A supplier for the EMC, communications and product safety industries since 1989, Com-Power leads in quality and affordability. Com-Power’s EMI test instruments empower test engineers and technicians to locate RF noise, test RF immunity, and measure both with precision.
Filter Products
Com-Power ISN T8 Impedance Stabilization Network
The Com-Power ISN T8 Impedance Stabilization Network has a frequency range of 150 kHz to 30 MHz and complies with CISPR 16-1-2, CISPR 22, and CISPR 32. With a 50 Ω BNC Female RF port connector type, a maximum current rating of...
Compare
Com-Power ANK-910L EMC Test Antenna Kit with Active Loop Antenna
The Com-Power ANK-910L EMC Test Antenna Kit comes with an active loop antenna, along with a vast range of other receivers. The ANK-910L antenna kit also includes a collapsible biconical antenna offering a frequency range...
Compare
Com-Power LI-4100 LISN
The Com-Power LI-4100 LISN, or Line Impedance Stabilization Network, provides the necessary measurement platform for performing power line conducted emissions compliance testing as required by most worldwide standards for...
Compare
Com-Power CDN-M525E Five Conductor Power Line 25 Amp CDN
The Com-Power CDN-M525E is a five conductor power line coupling decoupling network with a current rating of 25 A. The Com-Power CDN-M525E's disturbance signals are coupled to each conductor in the supply lines according to...
Compare
Com-Power PAM-118A Wideband High Gain Preamplifier, 500 MHz to 18 GHz
The Com-Power PAM-118A is a benchtop microwave preamp that operates over a frequency range of 500 MHz to 18 GHz. Com-Power PAM-118A preamplifiers are primarily intended for EMI / EMC applications; however, they may be used for...
Compare
Com-Power CGO-505 Comb Generator, 5 MHz - 1 GHz
The Com-Power CGO-505 Comb Generator is a broadband signal reference source with a frequency range of 5 MHz to 1 GHz and a 5 MHz step size. Com-Power CGO-505 are ideal for quick EMC site testing. EMC labs calibrate their...
Compare
Com-Power CDN-T8E CDN for 8 Line (4 Balanced Pairs)
The Com-Power CDN-T8E CDN is designed specifically for testing compliance to IEC/EN 61000-4-6 conducted immunity requirements. Com-Power CDN-T8E CDNs feature RJ45 connectors for both EUT and AE connection and handle up to 1.5...
Compare
Com-Power PS-500 Near Field Probe Set for EMI/EMC Testing
In addition to the probes included in the PS-400 probe set, the PS-500 near field probe set includes a probe with a fine metal tip that allows contact with the circuit being probed to measure levels directly on the trace...
Compare
Com-Power PS-400 Near Field Probe Set
The Com-Power PS-400 Near Field probe set consists of two E-Field probes and a H-Field probe for board level radiated emissions testing. One of the two E-field probes is patented. It has a fine tip that allows noise measurement...
Compare
Com-Power PC-114 Precompliance Test System
Com-Power PC-114 EMI emissions test system is a ideal solution performing pre-compliance EMC testing from 9 kHz - 1 GHz.. It has essential equipment needed for radiated and conducted EMI emissions measurements. The system...
Compare
Com-Power PAP-501 Preamplifier
The Com-Power PS-400 and PS-500 Near Field Probes Sets can be used with the optional PAP-501 RF Preamplifier with 20 dB nominal gain from 10 MHz - 1000 MHz. The preamplifier improves sensitivity of the spectrum analyzer to low...
Compare
Com-Power PAM-103 Preamplifier
The PAM-103 is a general purpose, broadband, high gain, benchtop amplifier. This preamplifier reduces floor noise and increases system sensitivity to low level signals during Electromagnetic Interference (EMC) testing. ...
Compare
Com-Power PA-840 Preamplifier
18000 MHz - 40000 MHz, 25 dB Gain
Compare
Com-Power PA-118 Preamplifier
500 MHz - 18000 MHz, 24 dB Gain
Compare
Com-Power PA-103 Preamplifier
The Com-Power PA-103 is a general purpose, broadband, high gain, bench top preamplifier. The PA-103 reduces floor noise and increases system sensitivity to low level signals during Electromagnetic Interference (EMC) testing. It...
Compare
Com-Power PA-010 Preamplifier
The Com-Power PA-010 is a general purpose, broadband, high gain, bench top preamplifier. The PA-010 reduces floor noise and increases system sensitivity to low level signals during Electromagnetic Interference (EMC) testing. It...
Compare
Com-Power LI-550A LISN, 50 Amps, for CISPR 25 & 16
Com-Power LI-550A LISNs operate over a frequency range of 100kHz - 108MHz and with a current range of 50 Amps. The LI-550A is compliant with both CISPR 25 and CISPR 16-1-2. Com-Power LI-550A LISNs provide...
Compare
Com-Power LI-400 Line Impedance Stabilization Network
Com-Power LI-400 Line Impedance Stabilization Network is a 10 kHz – 10 MHz frequency LISN. The Com-Power LI-400 Line Impedance Stabilization Network (LISN) provides the necessary measurement platform for performing power...
Compare
Com-Power LI-350 Line Impedance Stabilization Network 400 MHz
The Com-Power LI-350 Line Impedance Stabilization Network (LISN) provides the necessary measurement platform for performing power line conducted emissions compliance testing as required by most worldwide standards for...
Compare
Com-Power LI-325 Line Impedance Stabilization Network
Com-Power LI-325 Line Impedance Stabilization Network is a 0.15 – 400 MHz frequency LISN. The Com-Power LI-325 is intended for electromagnetic interference or EMI testing and certification of electronic products at an EMC...
Compare
Com-Power LI-3100 Line Impedance Stabilization Network (LISN)
The Com-Power LI-3100 Line Impedance Stabilization Network (LISN) can handle upto 100 Amps AC (70 Amps DC) current and provides the necessary measurement platform for performing power line conducted emissions compliance testing...
Compare
Com-Power LI-215 Line Impedance Stabilization Network, 30 MHz
Com-Power Line Impedance Stabilization Networks (LISN) are intended for electromagnetic interference (EMI) testing and certification of electronic products at an EMC test laboratory. The LISN, including the LI-215, were...
Compare
Com-Power LI-125A Line Impedance Stabilization Network 150 kHz - 30 MHz
The Com-Power LI-125A Line Impedance Stabilization Network (LISN) provides the necessary measurement platform for performing power line conducted emissions compliance testing as required by most worldwide standards for...
Compare
Com-Power LI-125 Line Impedance Stabilization Network (LISN)
Com-Power Line Impedance Stabilization Networks (LISN) are intended for electromagnetic interference (EMI) testing and certification of electronic products at an EMC test laboratory. The LISN were designed to match the...
Compare
Com-Power LI-115 Line Impedance Stabilization Network
Com-Power LI-115 Line Impedance Stabilization Network is a 0.15 – 30 MHz frequency LISN. The Com-Power LI-115 is intended for electromagnetic interference or EMI testing and certification of electronic products at an EMC...
Compare
Com-Power LI-1100 Line Impedance Stabilization Network
The Com-Power LI-1100 Line Impedance Stabilization Network (LISN) provides the necessary measurement platform for performing power line conducted emissions compliance testing as required by most worldwide standards for...
Compare
Com-Power CLA-150 Absorbing Clamp 30 MHz - 1 GHz
The Com-Power CLA-150 Absorbing Clamp was designed for EMC emissions measurement of from electrical instruments via their connecting leads. The absorbing clamp is described in CISPR 16 part 1-3: Radio disturbance and immunity...
Compare
Com-Power CGO-515 Comb Generator, 1MHz - 1.5GHz
EMI test labs must insure repeatable electromagnetic Interference (EMI) measurements. This is often accomplished by calibrating the EMI test site at regular intervals using published test methods. These methods although...
Compare
Com-Power CGO-501 Comb Generator, 1MHz - 1GHz
EMI test labs must insure repeatable electromagnetic Interference (EMI) measurements. This is often accomplished by calibrating the EMI test site at regular intervals using published test methods. These methods although...
Compare
Com-Power CGC-255E Comb Generator, 50kHz - 400MHz
Com-Power CGC-255E Comb Generator are a broadband EMC signal source for quick EMC conducted testing. It it used check you entire conducted test setup including LISN, cables, transient limiters and receivers quickly and...
Compare
Com-Power CGC-255 Comb Generator, .05 MHz - 30 MHz
The same principle that is used for verifying radiated emissions test site, can be employed to test the conducted emissions setup in an EMC test laboratory with a CGC series Comb Generator. This Comb Generator was specifically...
Compare
Com-Power CDN-T4 Coupling/Decoupling Network (CDN)
Coupling / Decoupling Networks (CDN) are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency fields. As the name implies the...
Compare
Com-Power CDN-T2 Coupling/Decoupling Network (CDN)
The Com-Power CDN-T2 Wire Coupling/Decoupling Networks (CDN) are designed for testing in the range of 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by...
Compare
Com-Power CDN-S4 4 Wire Coupling/Decoupling Networks (CDN)
Coupling / Decoupling Networks (CDN) are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency fields. As the name implies the...
Compare
Com-Power CDN-S2 2 Wire Coupling/Decoupling Network (CDN)
The Com-Power CDN-S2 2 Wire Coupling/Decoupling Networks (CDN) are designed for testing in the range of 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced...
Compare
Com-Power CDN-S1 Coupling/Decoupling Network (CDN)
The Com-Power CDN-S1 Coupling/Decoupling Network (CDN) is for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radiofrequency fields. The Com...
Compare
Com-Power CDN-M525 Coupling/Decoupling Network (CDN)
Coupling / Decoupling Networks (CDN) are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency fields. As the name implies the...
Compare
Com-Power CDN-M425 Coupling/Decoupling Network (CDN)
The Com-Power CDN-M425 Coupling/Decoupling Network (CDN) is for testing units in the range of 150 kHz - 80 MHz according to the EN 61000-4-6 standard for immunity to conducted disturbance induced by radiofrequency fields...
Compare
Com-Power CDN-M325 Coupling/Decoupling Network (CDN)
Com-Power CDN-M325 units are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency fields. As the name implies the CDNs...
Compare
Com-Power CDN-M225E Coupling/Decoupling Network (CDN)
Coupling / Decoupling Networks
Compare
Com-Power CDN-M125E Couplers Coaxial
The Com-Power CDN M125 Coupling / Decoupling Networks (CDN) is used to couple common mode and modulated signals onto single power line systems.
Compare
Com-Power CDN-C75 Coupling/Decoupling Network (CDN)
Coupling / Decoupling Networks (CDN) are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency fields. As the name implies the...
Compare
Com-Power CDN-AF8 Coupling/Decoupling Network (CDN)
Com-Power CDM-AF8 Coupling / Decoupling Networks (CDN) are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency fields. As the...
Compare
Com-Power CDN-AF4 Coupling/Decoupling Network (CDN)
Coupling / Decoupling Networks (CDN) are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency fields. As the name implies the...
Compare
Com-Power CDN-AF2 Coupling/Decoupling Network (CDN)
Com-Power CDN-AF2 Coupling / Decoupling Networks (CDN) are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 / IEC 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency fields. As the...
Compare
Com-Power AM-741 Active 41 inch Monopole Antenna
9 kHz - 30 MHz Active 41 inch Monopole antenna
Compare
Com-Power ALP-100 Log Periodic Antenna, 300 MHz - 1000 MHz
300 MHz - 1000 MHz Log Periodic Antenna
Compare
Com-Power AL-130 Active Loop Antenna
The Com-Power AL-130 is a broadband receiving loop antenna for operation in 10 kHz - 30 MHz frequency range. The antenna is designed for magnetic field measurements, utilizing a shielded loop. Its aluminum construction makes it...
Compare
Com-Power AL-100 Log Periodic Antenna, 300 MHz - 1 GHz
The Log Periodic antenna AL-100 is broadband antenna for operation in the frequency range of 300 MHz to 1 GHz. This antenna can be used for EMC emissions measurements and also for immunity testing. It has been designed to get a...
Compare
Com-Power AHA-118 Active Double Ridged Horn Antenna, 18 GHz
The Com-Power AHA-118 Active Double Ridged Horn Antenna operates at a frequency ranges of 1 GHz - 18 GHz with linear polarization. It is a useful, lightweight product at only 7 lbs and is easy to store and use in many...
Compare
Com-Power AH-840 Horn Antenna, 18 GHz - 40 GHz
18 GHz - 40 GHz Horn Antenna
Compare
Com-Power AH-220 Double Ridged Horn Antenna, 200 MHz - 2 GHz
200 MHz - 2000 MHz Double Ridged Horn Antenna
Compare
Calibrate
Com-Power AH-118 Double Ridged Horn Antenna, 1 - 18 GHz
The AH-118 horn antenna is a broadband antenna for use in the 1 GHz - 18 GHz frequency band. The horn antenna is designed for receive as well as transmit applications. It is a standard horn and has a relatively smooth response...
Compare
Com-Power AD-100 Half Wave Tuned Dipole Antenna Set, 30 MHz - 1 GHz
The Dipole antenna set AD-100 is a standard antenna designed for operation over the frequency range of 30 MHz to 1 GHz. These dipoles were designed per ANSI C63.4 requirements. The antenna set consists of four baluns...
Compare
Com-Power ACS-181 Power Amplifier 150 kHz - 80 MHz, 100 W
The ACS-181 is part of Com-Power's series of broadband RF amplifiers; diverse in application, yet specifically geared for use in EMC immunity testing applications. The ACS-181 model was engineered to provide high gain, with...
Compare
Com-Power AC-220 Combilog Antenna, 30 MHz - 2 GHz
The Com-Power AC-220 series Combilogs are broadband EMC antennas. It has a range of 30 MHz to 2000 MHz. The AC-220 can be used for both receiving and transmitting during EMC measurements. The Combilog antenna...
Compare
Com-Power AB-900 Wide Band Biconical Antenna, 30 MHz - 300 MHz
The Com-Power AB-900 is a Broadband Bi-conical Antenna for use in the 30 MHz to 300 MHz frequency bands. The AB-900 antenna balun is designed for receive or transmit applications. It is constructed using light weight aluminum...
Compare
Com-Power AB-100 Wide Band Biconical Antenna, 30 MHz to 300 MHz
The Com-Power AB-100 are Broadband Biconical Antennas for use in 30 MHz - 300 MHz frequency bands. The Com-Power AB-100 antenna balun is designed for receive only applications. The elements are constructed using light weight...
Compare
Filter Products
Narrow Your Results
Subcategories
Biconical Antennas
Bilogical Antennas
Comb Generators
Conducted LF RF Immunity
Coupling Decoupling Network
CW Amplifiers
Dipole Antennas
EMC Antennas
Horn Antennas
LISNs
Log Periodic Antennas
Loop Antennas
Monopole Antennas
Near Field Probes
RF Amplifiers
RF Components
RF Preamplifiers
Solid State Power Amplifiers
Apply