{% DocumentName %}
Manufacturer: 

ETS-Lindgren (EMCO)

ETS-Lindgren
ETS-Lindgren 8000-026 RF Power Amplifier
ETS-Lindgren 8000-026 RF Power Amplifier The ETS-Lindgren 8000-026 RF Power Amplifier is a 2500W/1900W power amplifier, designed primarily for EMC applications that include MIL-STD 461 RS103, 200 V/m. Utilizing GaAs technology, the ETS-Lindgren 8000-026 amplifier...
ETS-Lindgren GTEM-5402 RF Enclosure
ETS-Lindgren GTEM-5402 RF Enclosure The ETS-Lindgren GTEM 5402 RF Enclosure is an RF emissions and immunity test cell. With a maximum septum height of 250 mm (9.8 in), this device allows technicians to complete radiated emissions and radiated immunity...
ETS Lindgren EMCenter 7000-010 Modular RF Platform
ETS Lindgren EMCenter 7000-010 Modular RF Platform The ETS Lindgren EMCenter 7000-010 Modular RF Platform is a versatile system that collects a range of RF measurements with a powerful micro-controller. The EMCenter Modular RF Platform uses a modular chassis to enable...
ETS-Lindgren HI-6113 Laser Data Interface
ETS-Lindgren HI-6113 Laser Data Interface The ETS Lindgren HI-6113 is an automated laser controller that receives commands from the software running on the computer and then relays the requested data. To work, the ETS Lindgren HI-6113 receives the command to turn on...
ETS-Lindgren 3142E BiConiLog Antenna
ETS-Lindgren 3142E BiConiLog Antenna The ETS-Lindgren 3142E BiConiLog Antenna is a hybrid receiver that allows for easy immunity and emission testing without multiple antennas. The 3142E hybrid antenna features an improved frequency range from 30 MHz to 6 GHz...
Calibrate
ETS-Lindgren AMS-8050 Antenna Measurement System
ETS-Lindgren AMS-8050 Antenna Measurement System The ETS-Lindgren AMS-8050 Antenna Measurement System is a compact, fully anechoic RF enclosure for over-the-air (OTA) testing. ETS-Lindgren AMS-8050 RF enclosures are used for wireless device measurements including pre...
ETS-Lindgren MF-9F RF Leak Detector/Attenuation Meter Kit
ETS-Lindgren MF-9F RF Leak Detector/Attenuation Meter Kit The ETS-Lindgren MF-9F RF Leak Detector/Attenuation Meter Kit is designed to simplify the performance evaluation of shielding enclosures. ETS-Lindgren MF-9F kits offer the ability to make measurements for military and...
EMCO 4630 Reference Radiator, 10 kHz to 1 GHz
EMCO 4630 Reference Radiator, 10 kHz to 1 GHz The EMCO 4630 Reference Radiator is a precise highly stable field strength transfer standards with selectable frequency spacings over the range of 10 kHz to 1 GHz. The EMCO 4630 consists of a small battery powered comb...
ETS-Lindgren T/T Shielded Test Enclosure
ETS-Lindgren T/T Shielded Test Enclosure The ETS-Lindgren T/T Enclosure is a high performance, portable shielded enclosure designed for fast, convenient EMI/RFI testing and verification. Built to the same reliable shielding standards as full size ETS-Lindgren...
ETS Lindgren HI-6100 Field Probes
ETS Lindgren HI-6100 Field Probes ETS Lindgren HI-6100 Field Probes are laser-powered electric field probes designed to test for electromagnetic fields with wide EMF coverage and wide dynamic range. All ETS Lindgren HI-6100 field probes listed below are single...
ETS Lindgren HI-6153 Electric Field Probe
ETS Lindgren HI-6153 Electric Field Probe The ETS Lindgren HI-6153 Electric Field Probe is a broadband laser-powered field probe designed to offer wide EMF coverage and wide dynamic range and to satisfy a wide array of test standards. ETS Lindgren HI-6153 models are...
ETS Lindgren HI-6122 Electric Field Probe
ETS Lindgren HI-6122 Electric Field Probe The ETS Lindgren HI-6122 Electric Field Probe is an innovative e-field detection device featuring cutting edge isotropic sensor technology and a low noise, miniaturized design. ETS Lindgren HI-6122 probes offer broadband EMF...
ETS Lindgren HI-6105 Electric Field Probe
ETS Lindgren HI-6105 Electric Field Probe The ETS Lindgren HI-6105 Electric Field Probe is the culmination of cutting-edge advancements in the design of isotropic sensors and low-noise miniaturized electronics. ETS Lindgren HI-6105 field probes read data non-stop over...
ETS-Lindgren HI-6100 Field Monitor
ETS-Lindgren HI-6100 Field Monitor The ETS-Lindgren HI-6100 Field Monitor is a broadband electric and magnetic field probe monitor designed for use in radio frequency interference/electromagnetic compatibility (RFI/EMC) test system applications. It accepts...
ETS-Lindgren HI-6053 Electric Field Probe
ETS-Lindgren HI-6053 Electric Field Probe The ETS-Lindgren HI-6053 Electric Field Probe is a battery-powered EFP which operates at a broadband frequency range of 10 MHz to 40 GHz and a dynamic range of 2 to 800 V/m. The dynamic range of this electric field probe...
Calibrate
ETS-Lindgren HI-6006 Electric Field Probe With Field-Replaceable Battery
ETS-Lindgren HI-6006 Electric Field Probe With Field-Replaceable Battery ETS-Lindgren's Model HI-6006 Electric Field Probe is a fully intelligent sensor enabling fast and accurate EMF measurements with industry-leading performance specifications. Optical coupling to a variety of readout options...
EMCO/ETS-Lindgren HI-6005 Electric Field Probe
EMCO/ETS-Lindgren HI-6005 Electric Field Probe The EMCO/ETS-Lindgren HI-6005 Electric Field Probe is a fully intelligent sensor enabling fast and accurate EMF measurements with industry-leading performance specifications. Optical coupling to a variety of readout options...
Calibrate
ETS-Lindgren HI-2200 RF Survey Meter
ETS-Lindgren HI-2200 RF Survey Meter The ETS-Lindgren HI-2200 RF Survey Meter is a lightweight probe, easy to hold instrument for less accessible measurement locations such as towers and ladder access situations. A simple solution for basic RF safety measurements,...
ETS Lindgren Holaday's HI-1801 Survey Meter
ETS Lindgren Holaday's HI-1801 Survey Meter Holaday's HI-1801 provides an easy an inexpensive means for public health agencies and service technicians to check microwave leakage. A durable, compact and portable instrument, the HI-1801 is not susceptible to damage...
ETS-Lindgren DEI RF Shielded Enclosure
ETS-Lindgren DEI RF Shielded Enclosure The ETS-Lindgren DEI Copper screen enclosures are used where absence of a sense of confinement or where casual observation from the outside is desirable. The superior shielding characteristics obtained from ETS-Lindgren screen...
ETS-Lindgren 95236-1 Bulk Current Injection Probe
ETS-Lindgren 95236-1 Bulk Current Injection Probe The ETS-Lindgren 95236-1 Bulk Current Injection Probe has a 1.6" window, making it suitable for injecting current into most power or signal cables. (AWG 4/0 cable, good for several hundred Amps, is 12.7 mm (0.5 in...
ETS-Lindgren 93148 Log Periodic Dipole Array, 200 MHz to 2 GHz
ETS-Lindgren 93148 Log Periodic Dipole Array, 200 MHz to 2 GHz The EST-Lindgren 93148 Log Periodic Dipole Array, 200 MHz to 2 GHz is a non-characterized version of the Model 3148. The EST-Lindgren 93148 is a linearly polarized, broadband antenna designed to operate over the frequency range...
ETS-Lindgren 7605/7606 Coil/Shielded Coil Antennas
ETS-Lindgren 7605/7606 Coil/Shielded Coil Antennas The ETS-Lindgren 7605/7606 Coil/Shielded Coil Antennas are used as part of a system to verify the ability of an EUT to withstand radiating magnetic fields. The Model 7605 is a 20-turn coil of AWG-12 enamel-insulated copper wire...
ETS-Lindgren 7604 Shielded Coil Antenna
ETS-Lindgren 7604 Shielded Coil Antenna The ETS-Lindgren 7604 Shielded Coil Antenna is a magnetic field pick-up coil 13.3 cm (5.25 in) diameter, and has a loop that is constructed of aluminum. The loop has 36 turns of 7 x 41 Litz wire for lower inductance. The 7604...
ETS-Lindgren 7603 Coil Antenna 20 Hz - 50 kHz
ETS-Lindgren 7603 Coil Antenna 20 Hz - 50 kHz The ETS-Lindgren 7603 Coil Antenna 20 Hz - 50 kHz is built from the specifications in the original MIL-STD-461 document. The Model 7603 is a magnetic field generating coil 12.0 cm (4.75 in) diameter, made of delrin and wound...
EMCO/ETS-Lindgren 7405 E/H Near Field Probes
EMCO/ETS-Lindgren 7405 E/H Near Field Probes The EMCO / ETS-Lindgren 7405 E/H Near Field Probes are a passive, near field probe set designed as a diagnostic aid for locating and characterizing sources of E and H Field emissions. The set consists of three loop probes, one...
EMCO/ETS-Lindgren 6509 Transmitting Loop Antenna, 1 kHz - 30 MHz
EMCO/ETS-Lindgren 6509 Transmitting Loop Antenna, 1 kHz - 30 MHz The base of the Model 6509 loop antenna contains a type N female connector and a manually switchable four-band transformer. The transformer gives the antenna greater efficiency resulting in a better conversion of power to field...
Calibrate
ETS-Lindgren 6507 Active Shielded Loop 1 kHz - 30 MHz
ETS-Lindgren 6507 Active Shielded Loop 1 kHz - 30 MHz The ETS-Lindgren 6507 Active Shielded Loop 1 kHz - 30 MHz is an active receiving loop antenna designed to perform shielding effectiveness measurements per MIL-STD 285 and NSA-65-6 specifications. A radio frequency preamplifier...
EMCO 5407 GTEM! Test Cell 9 kHz - 1 GHz
EMCO 5407 GTEM! Test Cell 9 kHz - 1 GHz Beginning with design qualification testing and moving through to pre-compliance testing, full compliance testing and production sampling, ETS-Lindgren GTEM!™ Test Cell is a time saving device for your test lab. A typical...
EMCO 4825/2 Line Impedance Stabilization Network
EMCO 4825/2 Line Impedance Stabilization Network The ETS Lindgren (EMCO) 4825-2 LISN is a two-line, low pass, filter network used for conducted emissions measurements. The product is placed between the power mains and the equipment under test (EUT) to stabilize line impedance...
EMCO/ETS-Lindgren 3925-2 Line Impedance Stabilization Network
EMCO/ETS-Lindgren 3925-2 Line Impedance Stabilization Network ETS-Lindgren Line Impedance Stabilization Networks (LISNs) are multi-line low pass filter networks used for conducted emissions measurement. LISNs isolate an electrically powered EUT from the external power source, stabilize...
EMCO 3850/2 Line Impedance Stabilization Network
EMCO 3850/2 Line Impedance Stabilization Network EMCO Line Impedance Stabilization Networks (LISNs) and Power Line Impedance Stabilization Networks (PLISNs) are multi-line low pass filter networks used for conducted emissions measurement. LISNs and PLISNs isolate an...
EMCO/ETS-Lindgren 3825/2 Line Impedance Stabilization Network
EMCO/ETS-Lindgren 3825/2 Line Impedance Stabilization Network The EMCO 3825/2 Line Impedance Stabilization Network is a multi-line low pass filter network used for conducted emissions measurement. The EMCO 3825/2 isolates an electrically powered EUT from the external power source...
EMCO / ETS-Lindgren 3810/2 Line Impedance Stabilization Network
EMCO / ETS-Lindgren 3810/2 Line Impedance Stabilization Network Multi-line low pass filter networks used for conducted emissions measurement. They are placed between the power mains and the EUT (Equipment Under Test) to stabilize line impedance, provide a 50 ohm RF connection, and eliminate...
EMCO 3304 Monopole/Rod Passive Antenna
EMCO 3304 Monopole/Rod Passive Antenna 10 kHz - 10 MHz, Monopole/Rod Passive Antenna
ETS-Lindgren 3183 Mini-Biconical Antenna for CISPR 16-1-4 Chamber Characterization
ETS-Lindgren 3183 Mini-Biconical Antenna for CISPR 16-1-4 Chamber Characterization ETS-Lindgren's 3183 broadband omni-directional antenna meets the new CISPR 16-1-4 chamber characterization and calibration requirements for measurements above 1 GHz. An operating frequency of 1 - 18 GHz eliminates band...
ETS Lindgren EMCO 3146 Log Periodic Antenna
ETS Lindgren EMCO 3146 Log Periodic Antenna The ETS Lindgren EMCO 3146 Log Periodic Antenna is a linearly polarized broadband antenna and designed to be used for EMC Emissions and Immunity Testing. The broadband antenna is ideally suited to swept measurements. The...
ETS-Lindgren 3142E-PA BiConiLog 30 MHz - 6 GHz
ETS-Lindgren 3142E-PA BiConiLog 30 MHz - 6 GHz The ETS-Lindgren 3142E-PA BiConiLog 30 MHz - 6 GHz is a hybrid antenna that combines innovative design, compact size, and excellent performance with a pre-amplifier module. This antenna enables users to measure a frequency...
ETS-Lindgren 3142C BiConiLog Antenna, 26 MHz - 3 GHz
ETS-Lindgren 3142C BiConiLog Antenna, 26 MHz - 3 GHz The ETS-Lindgren 3142C BiConiLog Antenna is a hybrid antenna that combines innovative design, compact size, and excellent performance. This antenna enables users to measure a frequency range of 26 MHz to 3.0 GHz in one sweep...
EMCO 3142 Biconical Antenna. 26MHz - 2GHz. 300Watt
EMCO 3142 Biconical Antenna. 26MHz - 2GHz. 300Watt Model 3142 biconilog is a hybrid linearly polarized antenna and makes measurements from 26MHz to 2GHz in one sweep. The biconilog comprises a Log Periodic Dipole Array (LPDA) with a “bow-tie” element. This usual...
EMCO/ETS-Lindgren 3121 Dipole Antenna, 28 MHz - 1 GHz
EMCO/ETS-Lindgren 3121 Dipole Antenna, 28 MHz - 1 GHz The EMCO 3121 dipole antenna with its set of four compensated baluns offers an accurate standard for precise EMI measurements. This 3121 is an improvement of the FCC balun design and performs close to the theoretically perfect...
ETS-Lindgren 3117 PA Double-Ridged Waveguide Horn 1 - 18 GHz
ETS-Lindgren 3117 PA Double-Ridged Waveguide Horn 1 - 18 GHz The ETS-Lindgren 3117 PA Double-Ridged Waveguide Horn 1 GHz  - 18 GHz is a special version of the popular Model 3117 Double-Ridged Waveguide Horn Antenna, fitted with a pre-amplifier package and calibrated as a single unit...
EMCO/ETS-Lindgren 3117 Double-Ridged Waveguide Horn Antenna
EMCO/ETS-Lindgren 3117 Double-Ridged Waveguide Horn Antenna The Model 3117 Double Ridged Waveguide is a the latest addition to a family of double ridge wave guides for microwave and EMC measurement from ETS-Lindgren. This model corrects the lower gain at the upper end of the frequency...
Calibrate
ETS-Lindgren 3116C PA Double-Ridged Waveguide Horn 18 - 40 GHz
ETS-Lindgren 3116C PA Double-Ridged Waveguide Horn 18 - 40 GHz The ETS-Lindgren 3116C PA Double-Ridged Waveguide Horn 18 GHz - 40 GHz is a special version of the popular Model 3116C Double-Ridged Waveguide Horn Antenna, fitted with a pre-amplifier package and calibrated as a single unit...
ETS Lindgren 3116C Double-Ridged Waveguide Horn Config
ETS Lindgren 3116C Double-Ridged Waveguide Horn Config The ETS Lindgren 3116C Double-Ridged Waveguide Horn is the latest addition to a family of double-ridge guide horns for EMC measurement from ETS-Lindgren. This model corrects the lower gain at the upper end of the frequency...
EMCO/ETS-Lindgren 3115 Double-Ridged Waveguide Horn Antenna 1 GHz - 18 GHz
EMCO/ETS-Lindgren 3115 Double-Ridged Waveguide Horn Antenna 1 GHz - 18 GHz The EMCO/ETS-Lindgren 3115 Double-Ridged Waveguide Horn Antenna is ideally suited for IEC 61000-4-3 and MIL-STD 461G immunity tests and ANSI C63.4 and EN 55022 emissions testing. As a set, this linearly polarized broadband...
ETS-Lindgren 3110C Biconical Antenna
ETS-Lindgren 3110C Biconical Antenna The ETS-Lindgren Model 3110C Biconical Antenna combines several unique features, achieving high levels of performance. The balun, feedline, and element cage design give the Model 3110C response curves that are almost linear...
EMCO/ETS-Lindgren 3110B Biconical Antenna 30 MHz - 300 MHz
EMCO/ETS-Lindgren 3110B Biconical Antenna 30 MHz - 300 MHz The ETS-Lindgren EMCO 3110B Biconical Antenna is specifically designed for radiated emissions testing. This high performance, receive only, antenna operates with in a frequency range of 30 MHz to 300 MHz.   The biconical...
ETS-Lindgren 3109 Biconical Antenna 20 MHz - 300 MHz
ETS-Lindgren 3109 Biconical Antenna 20 MHz - 300 MHz The ETS-Lindgren 3109 Biconical antenna uses a modified Guanella balun for impedance transformation and matching, and it is constructed of much heavier materials so that maximum continuous input power can reach 2 kW. While the...
ETS-Lindgren 3107B Parallel Element E-Field Generator
ETS-Lindgren 3107B Parallel Element E-Field Generator The ETS-Lindgren 3107B Parallel Element E-Field Generator can Generate large electrical fields over the frequency range of 10 kHz - 30 MHz for RI testing. The 3107B was the first commercially available E-Field generator, and...
ETS-Lindgren 3106 Double-Ridged Waveguide Horn 200 MHz - 2 GHz
ETS-Lindgren 3106 Double-Ridged Waveguide Horn 200 MHz - 2 GHz The ETS-Lindgren 3106 Double-Ridged Waveguide Horn 200 MHz - 2 GHz is a linearly polarized broadband antenna covering the frequency range of 200 MHz to 2.0 GHz. The Model 3106 was designed and built specifically for EMI...
EMCO 3104 Biconical Antenna, 20 MHz - 200 MHz
EMCO 3104 Biconical Antenna, 20 MHz - 200 MHz ETS-Lindgren 3104C Biconical Antenna was designed for Military and DOD EMI applications within the 20 MHz – 200 MHz range, but is finding use in other industrial applications. Constructed of welded aluminum, the phenolic...
EMCO 3102 Conical Log Spiral, 900 MHz - 10 GHz
EMCO 3102 Conical Log Spiral, 900 MHz - 10 GHz For the higher end of the spectrum, (1 GHz - 10 GHz) of EMCO/ETS-Lindgren's 3000 class of antennas, the 3102 conical log spiral antenna offers spectral characteristics in the measurement of RF emissions. The 3102 provides a...
EMCO 3101 Conical Log Spiral, 200 MHz - 1 GHz
EMCO 3101 Conical Log Spiral, 200 MHz - 1 GHz MIL-STD testing and SAE testing were the initial motivation behind the design of the 3101 Antenna by the Department of Defense. More recently, alternative testing has found use for this class of conical log spiral antennas...
EMCO/ETS-Lindgren 2090 Multi-Device Positioning Controller
EMCO/ETS-Lindgren 2090 Multi-Device Positioning Controller ETS-Lindgren's Model 2090 Multi-Device Positioning Controller is designed for use with ETS-Lindgren positioning devices such as Antenna Towers, Turntables, Reverberation Paddles, Multi-Axis Positioners, etc. to accomplish a...