Giatec iCOR Wireless Corrosion Detector
The Giatec iCOR Corrosion Detector is a non‑destructive, wireless NDT device used to measure rebar corrosion rate, corrosion potential, and in‑situ concrete electrical resistivity from the surface of reinforced concrete. It provides results in 3–30 seconds with corrosion rate measurements ranging from 0–500 μm/year, without drilling or direct connection to the rebar. Data is collected and analyzed through a free Android app, producing real‑time contour maps aligned with ASTM C876 and RILEM TC 154‑EMC standards.
| Measurement Parameters | Rebar corrosion rate, corrosion potential, in-situ electrical resistivity |
| Corrosion Rate Range | 0 – 500 μm/year |
| Testing Time | 3 – 30 seconds per measurement |
| Corrosion Potential Range | –800 ... +200 mV (CSE) |
| Electrical Resistivity Range | 0 – 10,000 Ω·m |
| Measurement Method | Non-destructive, non-invasive surface measurement with no rebar connection |
| Technology | Patented CEPRA corrosion rate measurement technology |
| Data Communication | Wireless data transfer to free Android app |
| Standards Compliance | ASTM C876 (Half-Cell), RILEM TC 154-EMC |
| Operation | Single-person operation; tablet included |
- Software
- Real-time contour mapping of corrosion rate, electrical resistivity, and corrosion potential
- Accurate non-subjective algorithm-based interpretations
- Multiple and directional parameters tested in a single measurement
- Easy reporting and data exporting
- Hardware
- Non-destructive, and non-invasive wireless technology
- Measurements obtained and evaluated within seconds
- Simple and easy-to-use with minimal training required
- Single-person operation device
- Tablet included with free Android app
- Award-winning patented technology
- Measurement cable (for half-cell test)
- Charging cable
- Tablet charger
- Contact sponge (for half-cell electrode)
- Alligator test clip
- Contact sponge (for corrosion electrodes)
- Electrode storage solution
- Conductive gel
- Spray bottle
- Carrying case
- Tablet with strap
- Detection of corrosion in reinforcement
- Measurement of rebar corrosion rate
- Evaluation of corrosion potential of rebar
- Measurement of in-situ electrical resistivity
- Assessment of concrete durability
- Rehabilitation and repair of concrete structures
- ASTM C876 – Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
- C876 – Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
SKU: GIAT-iCOR