Agate Technology AT-2040 Portable Vibration Calibrator

The Agate Technology AT-2040 Portable Vibration Calibrator features high-accuracy sensor simulation, automatic mass-load correction, networking capabilities, and advanced computer algorithms for accurate readout. The AT-2040 calibration shaker table has a frequency range of 5 Hz to 10 kHz with a vibration signal acceleration accuracy of ±4%. The Agate Technology AT-2040 Portable Vibration Calibrator is ideal for troubleshooting cables and wires as well as simulating vibration and machinery-speed signals. The system is applicable in calibrating accelerometers, proximity probes & drives, monitoring systems, and avionics equipment.

Product Info Related Products

Frequency range	5 Hz - 10 kHz	360 - 600000 CPM
Maximum amplitude	20 g pk 15 in/s pk 50 mils p-p	196 m/s² pk 380 mm/s pk 1270 µm p-p
Vibration signal acceleration accuracy	5 Hz to 9Hz: ±4% 10 Hz to 10 kHz: ±2.5%
Vibration signal displacement accuracy	30 Hz to 150 Hz: ±3%
Amplitude linearity (100 g payload, 100 Hz)	<1% up to 10 g pk
Waveform distortion (100 g payload, 30 Hz to 2 kHz)	<5% THD (typical) up to 5 g pk
Simulation performance frequency range	1 - 11000 Hz
Dimensions (H x W x D)	8.5 × 12 × 10 in 22 × 30.5 × 28 cm
Weight	15.2 lb. (6.9 kg)
Operating temperature	32°F - 122°F (0°C - 50°C)

A2LA Accreditation ISO/IEC 17025:2017
Quartz Reference Accelerometer
Calibrated back to back with laser calibrated primary reference for increased accuracy
Simulation Mode
Digital closed loop control
Digital electronics
100 - 240 V power with standard plug receptacle and built in charger
Custom PC Software included to setup Full-Automatic Test Mode
Built in Charge Converter
Voltage, charge (piezoelectric), 4 - 20 mA, and proximity probe sensitivity readings
Adjustable current and voltage
Automatic PDF certificate generation tailored to your custom specifications
Export Data to CSV
Connect to a PC through Wi-Fi and control the device from a remote location with Google Chrome’s built in VNC viewer

Power cable
Micro dot (10-32)
¼-28 stud
2-56 UNC adapter
Universal Velocity Adapter Disc
Universal Accelerometer Adapter Disc
Short-handle wrench
10-32 UNF stud
6-32 UNC adapter
10-32 UNF adapter
USB drive: loaded with setup software for custom sensor

Troubleshoot cabling and wiring
Simulate vibration signals for accelerometers and velocity probes
Simulate machinery-speed signals
Calibrate:
- Accelerometers
- Proximity probes and drivers
- Monitoring systems
- Analyzers
- Avionics equipment

SKU: AGAT-AT2040