- Cable Types: UPT, FTP, ScTP, STP, Coax
- Test Standards:
TIA Cat 3, 4, and 5 Basic Link or Channel
ISO1 1801 Class A, B, C, or D
IEEE 10Base5, 10Base2, or 10Base-T
IEEE Token Ring 4 Mbps or 16 Mbps
IEEE 100Base-TX, 100Base-T4
IEEE 802.12 ( 100VG-AnyLan ) 4-UTP or 2 STP
ANSI TP-PMD
Aus / NZ Class C, D Basic Link or Channel
- Speed of Autotest: Full Autotest of Category 5 UTP cable, including 6 pair combinations for NEXT in both directions*, in less than 17 seconds
- Supported Tests: Wire Map; Length, Propagation Delay, Delay Skew; Attenuation; Attenuation-to-Crosstalk Ratio (ACR); ACR @ Remote*; Characteristic Impedance; DC Loop Resistance; Return Loss (RL)
- Test Connections: One shielded 8-pin modular connector, (RJ45), and one BNC connector
- Power:
Main Instrument: Rechargeable NiCad battery with 10-12 hours typical battery life
Standard Remote Unit: Replaceable 9V 425 alkaline cell
Test Fiber Optic Cables
When paired with the optional Fluke DSP-FTK Fiber Test Kit, the DSP-100 detects bad connections, bad splices, broken fibers, and loss of power from bends and fiber-type mismatches.
CableMeter Includes:
- DSP-100 CableMeter
- DSP-100 Standard Remote
- DSP-LNK Software
- PC Serial Interface Cable
- AC Adapter / Charger
- Carrying Case
- Coax Patch Cable (1)
- 2m UTP Cat 5 Shielded Patch Cables (2)
- 10" Calibration Cable (1)
*Remote End Testing requires second DSP-100 in Smart Remote Mode