Pruftechnik ALIGNEO Laser Shaft Alignment Tool

Quote Add-Ons

Tech Support
(800) 404-2832

With Every
Rental

Worldwide
Delivery

Pruftechnik ALIGNEO Laser Shaft Alignment Tool

Larger

Categories

Laser Shaft Alignment

Documents

Brochure

The Pruftechnik Aligneo Laser Shaft Alignment Tool offers both precision alignment and time-saving convenience expected of a laser precision measurement system. Its intuitive operation, well thought-out design and the loaded features make Pruftechnik Aligneo units a necessary device in the maintenance world when it comes to the alignment of pumps, motors, gearboxes and compressors. The achieved resolution of a micron increases the overall precision, leading to more accurate alignment. Aligned machines reduce the load on the shafts dramatically, resulting in increased machinery life, extended machine availability and increased saving on maintenance costs.

Specifications
Features
Applications
Options
Accessories
Standards
Videos

Features

Static measurement mode – requires any 3 of the 8 available 45° measurement positions
UniBeam® – for quick adjustment of the single laser beam
Coupling and foot results displayed in both numerical and graphical format
Live monitoring of horizontal or vertical machine corrections
Soft foot check – measure, correct and save results
Alignment of 6-feet machines
Alignment of nonrotatable and uncoupled shafts
Measurements unaffected by coupling backlash
Save up to 10 measurement files
Automatic data protection in case of power interruption
Pre-assembled brackets designed for quick and rigid set-up
Protected against dust, water and grease in compliance with classifications IP 65 and IP 67
PC freeware ALIGNMENT REPORTER for measurement file backup and printing reports

Specifications

Control unit

Display
- Fixed segment LCD display
- Dimensions: approx 94 x 73 mm [3.7” x 2.9”]
Keyboard: Robust, membrane keyboard
Environmental protection: IP 65 (dust-tight, protected against water jets)
Intrinsic safety [optional]
- II 2 G Ex ib [ib] IIC T4, Zone 1
- Certificate numbers: TÜV 08 ATEX 554147, IECEx TUN 08.0004
Operating temperature
- 0°C to 55°C [32°F to 131°F]
- Intrinsically safe versions 0°C to 50°C [32°F to 122°F]
Power supply
- 4 x 1.5V IEC LR6 (“AA”) batteries (rechargeables permitted)
- For intrinsically safe versions only use 1.5 V “AA” MN 1500 from Duracell
- or AccuCell AC 1800 rechargeable batteries
Battery life (alkaline)
- 25 hours – based upon an operating cycle of 50% measurement and
- 50% ‘sleep’ mode
Interfaces
- 1 x sensor; 1 x printer/PC (serial)
- For intrinsically safe versions – 1 x sensor; 1 x PC

Transducer

Details
Measurement principle: Coaxial, reflected laser beam
Environmental protection: IP 67 (submersible, dust-proof)
Ambient light protection: yes
Storage temperature: -20°C to 80°C [-4°F to 176°F]
Operating temperature: 0°C to 55°C [32°F to 131°F]
Intrinsically safe versions 0°C to 50°C (32°F to 122°F)
Intrinsic safety [optional]
- II 2 G Ex ib op isb IIC T4, Zone 1
- Certificate numbers: TÜV 07 ATEX 554148, IECEx TUN 08.0003
Laser
- Type: Ga-Al-As semiconductor laser
- Wavelength (typical) 675 nm (red, visible)
- Safety class: Class 2, FDA 21 CFR 1000 and 1040
- Beam power: < 1 mW
- Safety precaution: Do not look into laser beam
Detector
- Measurement area: unlimited, extendible (U.S. Patent 6,040,903)
- Resolution: 1μm
- Accuracy (average): > 98%
Inclinometer
- Measurement range: 0° bis 360°
- Resolution: <1°

Reflector

Details
- Type: 90° roof prism
- Accuracy (average): > 99%
- Environmental protection: IP 67 (submersible and waterproof)
- Storage temperature: -20°C to 80°C [-4°F to 176°F]
- Operating temperature: -20°C to 60°C [-4°F to 140°F]
- Dimensions: approx 100 x 41 x 35 mm [4”x1 5/8”x1 3/8”]
- Weight: approx 65 g [2½ oz.]

Applications

Options

Accessories

Standards

Media

Pruftechnik ALIGNEO Laser Shaft Alignment Tool

Quote Add-Ons

RELATED PRODUCTS