Related Products

Keysight PA2203A IntegraVision Power Analyzer | 4 Channels, 3-Phase AC
- Operates like an oscilloscope, but makes measurements like a power analyzer
- Achieve 0.05% basic accuracy for superior measurement integrity
- The PA2201A comes with 2 power channels for single phase measurements and analysis; the PA2203 has 4 power channels for 3-phase measurement and analysis

Danisense 6 Channel Current Transducer System
- Compact 19” rack mount 1U height
- Current transducers’ output signals (current or voltage) available via 4mm banana plugs
- Individual or serial access to calibration windings of all 6 transducers via 4mm banana plugs


Yokogawa WT1806E Precision Power Analyzer
- 6 inputs on a high-resolution display
- Harmonic analyses
- Guaranteed accuracy across a wide range


Tektronix PA4000 Power Analyzer, DC - 1 MHz, 30 ARMS, 1000 VRMS
- 1 to 4 Input Modules allows several configurations to match your application
- High measurement accuracy of 0.04% (basic voltage & current accuracy) for demanding test requirements
- Dual internal current shunts for each module maximize accuracy for high- and low-current measurements


Keysight N6705A DC Power Analyzer | 600 W
- Easy to use R&D tool for sourcing and measuring DC voltage and current into the DUT
- Integrates capabilities of up to 4 Power Supplies, DMM, Scope, Arb and Data Logger
- Access all capabilities without programming; either use the front panel controls or the 14585A Control and Analysis Software

DaniSense DS600ID 600Arms Current Transducer
- 1ppm maximum linearity error
- Fluxgate loop technology
- DSUB 9 pin connection


Xitron 2503AH Series Power Analyzer
- 18-bit, 500 kHz sampling speed provides 0.05% basic accuracy
- Ultra-fast FFT’s per channel produce measurements in 10 ms
- 3000 V Peak, 50 Amp Peak internal shunt and Hall effect CT’s


NH Research S320 Power Supply Analyzer
- Level of flexibility normally associated with custom design instruments
- Ability to control DC power supplies along with DC dynamic loads within the same 5.25 in chassis
- Allows for power quality analysis


Danisense DS50ID 50Arms Current Transducer
- Linearity error maximum 8 ppm
- Fluxgate, closed loop compensated technology with fixed excitation frequency and second harmonic zero flux detection for best in class accuracy and stability
- Industry standard DSUB 9 pin connection


Voltech IEC555 Reference Impedance Network


Yokogawa WT210 Single Input Digital Power Meter
- Basic power accuracy of 0.1%
- DC measurement, 0.5 Hz to 100 kHz power frequency range
- Compact design (half-rack size)


Yokogawa WT1600 Digital Power Meter
- A High-Precision, Wideband Digital Power Meter
- Up to Six-Phase Input on One Unit, Synchronized
- Measurements Between Two Units


DaniSense DL2000ID 2000Arms Current Transducer
- 1ppm linearity
- 6ppm offset
- Current output


Yokogawa WT332 Digital Power Meter 100 kHz, 2 Ch
- Basic accuracy of 0.1% of reading
- DC, 0.5 Hz to 100 kHz Frequency Range
- Peak Value of 450A or RMS value of 300 A


Yokogawa WT5000 Precision Power Analyzer
- Basic power accuracy of ±0.03%
- 10 MS/s, 1MHz power bandwidth
- Peak voltage of 2.5 kV or RMS of 1.5kV


Yokogawa WT1806 Power Analyzer
- DC Power Accuracy ±0.05%
- Voltage/Current Frequency Range: 5 MHz
- Voltage Range of 1.5 V to 1000 V


Valhalla 2800 Multiphase Power Analyzer Series
- Has 4 operating modes
- 18 bit resolution
- High accuracy at 10% full scale


Yokogawa WT300 Series Digital Power Meters
- Basic accuracy: 0.1% of Reading
- DC measurement: 0.5 Hz to 100 kHz frequency range
- Measures all AC and DC parameters


Yokogawa WT332E Digital Power Analyzer
- 3-phase, DC, 0.1 Hz – 100 kHz
- 15V – 600V, 5mA – 20A
- ±0.15% reading accuracy


Hioki U7001 Input Module | Precision Power Analyzer
- Input module for the PW8001 Precision Power Analyzer
- Basic accuracy for 50/60 Hz: Power ± 0.07%
- Measurement frequency band (DC) of 0.1 Hz to 1 MHz


Yokogawa WT1803 Power Analyzer


Hioki PW8001-01 Precision Power Analyzer
- Accurate capture of power fluctuations caused by high-speed switching
- Up to 8 power channels optimizing your measurement
- Safe evaluation of increasingly high-voltage power conditioners


Voltech PM3000ACE Precision Power Analyzer
- Intuitive front-panel or Windows software operation
- High 0.05% basic accuracy
- Wide bandwidth measurements, DC and 0.1Hz to 1MHz


Voltech PM1000 AC Power Analyzer
- Easy to use-fully autoranging for voltage, current and frequency
- Accurate measurements of real power (W) and apparent power (VA) even with distorted waveforms
- Displays real power factor


Fluke Norma 5000, N5K High Precision Power Analyzer
- Number of phases: 3, 4 or 6
- Bandwidth: dc to 3 MHz or dc to 10 MHz depending on input module
- Basic Accuracy: 0.2%, 0.1% or 0.03% depending on input modules