DC: Battery Test Systems

NH Research NH Research 9300 High Voltage Battery Test System Series

The NH Research 9300 High Voltage Battery Test System Series delivers fully programmable and bi-directional DC power sources (charge) which provide reversible current flow, acting as a regenerative DC load (discharge). The wide...

  • NH Research
Arbin Arbin LBT21024 Battery Test System

The Arbin LBT21024 Battery Test System is a 0-10V, 8-channel, 100A/25A/5A/500mA battery life cycle tester with high-precision measurement and high-frequency data sampling capabilities. Arbin LBT21024 units record electrical...

  • Arbin
NH Research NH Research 9200 Battery Test System

The NH Research 9200 Battery Test System holds up to three 12 kW, 40, 120 or 600 V bi-directional loads. Systems can be configured utilizing from 1 to 12 modules. Each power module is isolated, independently programmable...

  • NH Research
Megger Megger Torkel 860 Battery Bank Load Tester up to 110A, 480V

The Megger TORKEL 860 is used for systems ranging from 12 to 480 V, and discharging can proceed at up to 110 A. If higher current is desired, two or more TORKEL 860 units or extra load units, TXL, can be linked together...

  • Megger
Megger Megger Torkel 950 Battery Load Unit

The Megger Torkel 950 Battery Load Unit is a discharge test system which discharges energy at up to 220A and 500V, providing technicians with a comprehensive insight into battery capacity. Multiple Megger Torkel 950 Battery...

  • Megger
NH Research NH Research 9210 Single Channel DC Test System

The NH Research 9210 further extends its 9200 family of high-power battery charge/discharge test systems, which are especially suitable for EV (electric vehicle) and grid storage battery cycling as well as drive-cycle...

  • NH Research
Megger Megger Torkel 840 DC Battery Load Tester

The Megger Torkel 840 DC Battery Load Tester is made for battery systems in the range from 12 V to 250 V, often encountered in switchgear and other equipment alike. Discharging can take up to 110 A, and two or more 840 units or...

  • Megger
Megger Megger BITE 2 Battery Impedance Test Equipment

The BITE 2 Battery Impedance Test Equipment determines the condition of lead-acid and nickel-cadmium cells up to 7000 Ah. An advanced feature set has been developed that includes Pass/Warning/ Fail calculations based on a user...

  • Megger
Megger Megger BVM600 Battery Voltage Monitor

The Megger BVM600 Battery Voltage Monitor is a battery voltage measurement device that is used for the capacity testing of large, industrial battery banks commonly found in electrical power sub-stations, telecom facilities and...

  • Megger
Megger Megger / Biddle BITE 2P Battery Impedance Tester

The Biddle BITE 2P (246004) Battery Impedance Test Equipment determines the condition of lead-acid and nickel-cadmium cells up to 7000 Ah. An advanced feature set has been developed that includes Pass/Warning/ Fail calculations...

  • Megger
Megger Megger TXL Extra Load Units for Torkel Test Systems

These resistive extra loads do not perform any regulating functions. They are designed for use together with TORKEL battery load units. Their purpose is to provide higher load currents for use in constant current or constant...

  • Megger
Megger Megger BGFT Battery Ground Fault Tester

The Battery Ground Fault Tracer is an economical, easy-to-use instrument that identifies, traces and locates ground faults in ungrounded dc systems— on-line. It is particularly effective in high electrical noise...

  • Megger
Megger Megger BITE 3 Battery Impedance Tester

The Megger BITE 3 Battery Impedance Test Equipment determines the health of lead-acid cells up to 2000 Ah by taking measurements of the most important battery parameters. The BITE 3 measures cell impedance, an internal ohmic...

  • Megger
Midtronics Midtronics CTU-6000 Micro CellTron Ultra Battery Analyzer Kit

The Midtronics CTU-6000 Micro CellTron Ultra Battery Analyzer Kit features a universal stationary battery analyzer. Effective battery maintenance involves much more than monthly, quarterly or annual testing. Since the battery...

Megger Megger BVM300 Battery Voltage Monitor

The Megger BVM300 Battery Voltage Monitor is a battery voltage measurement device that is used for the capacity testing of large, industrial battery banks commonly found in electrical power sub-stations, telecom facilities and...

  • Megger
Hioki Hioki BT3554 Battery HiTester

Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The Hioki BT3554 battery internal resistance tester sets the standard for assessing the...

  • Hioki
AeroVironment AeroVironment ABC-150 Dual Channel Cycling Station

AeroVironment developed the ABC-150 to support the design and development of the drivetrain and subsystems of the GM Impact, the first modern electric car. The ABC-150 is now the worldwide standard for the testing of advanced...

AeroVironment AeroVironment ABC-170 Dual Channel Cycling Station with Extended Sink Power

AeroVironment’s ABC-170 is used to develop and test products that require additional sinking power. The ABC-170 was originally developed to test fuel cells in an energy efficient manner, by returning clean AC power back...

AeroVironment AeroVironment ABC-600 High Voltage Dual Channel Cycling Station

AeroVironment's ABC-600 was designed with increased voltage and current capability to meet the development demands of drivetrains, motors, energy storage devices and more. With a higher output rating, the ABC-600 is an ideal...

AeroVironment AeroVironment AV-900 EX Battery Pack Tester

The AV-900 EX is ideal for testing and emulating energy storage and drive train components. The increased performance (rise time/slew rate) and increased accuracy make the AV-900 EX ideal for applications like Heavy Industrial ...

AeroVironment AeroVironment AV-900 Heavy Duty Dual Channel Cycling Station

The AV-900 is AeroVironment’s heavy duty test solution. With greater voltage, current and power capability, this system is ideal for testing and emulating energy storage and drivetrain components of large electric and...

AeroVironment AeroVironment MT-30 Dual Channel Cycling Station for Modules

AeroVironment’s MT-30 is ideal for testing smaller applications such as battery modules, fuel stacks, partial modules and smaller components. This system provides an economical solution for a variety of testing needs...

Alber Alber Cellcorder CRT-400 Battery Cell DC Resistance Tester

The Cellcorder CRT-400 is Alber's newest handheld battery cell voltage and DC resistance tester. This exciting addition to Alber's test, diagnostic and trending products measures and records cell float voltage, internal...

Alber Albercorp CLC200 Cellcorder Battery Multimeter

The Albércorp Cellcorder is a data storing battery multimeter that provides fast, accurate information in a fraction of the normal test time. Compact and light weight in design, this intelligent test unit displays and...

Biddle Biddle MBITE 246005 Battery Impedance Tester

The Biddle MBITE Battery Impedance Tester is a lightweight, compact tester that incorporates advanced design and capability for the increasingly accepted and practical technology of battery impedance testing. In addition to...

DV Power DV Power BLU360V Battery Load Unit

DV Power BLU360V Battery Load Unit series are stand-alone or PC-controlled battery capacity test instruments based on the state-of-the-art technology. Their design is deploying the most advanced power electronics solutions with...

DV Power DV Power BLU-K Series Battery Load Units

The DV Power BLU-K Series Battery Load Units are affordable capacity test devices designed with portability and user-friendliness in mind. Implementing the most advanced power electronics solutions, a significant reduction in...

Eagle Eye Eagle Eye IBEX-1000 Portable Resistance Battery Tester

The Eagle Eye IBEX-1000 Portable Resistance Battery Tester is an economical battery tester in the IBEX-Series portable battery testing line. The IBEX-1000 accurately and quickly tests a battery's remaining service life while...

Eagle Eye Eagle Eye IBEX-Pro Portable Resistance Battery Tester

Eagle Eye's IBEX-Pro battery testing kit is an affordable portable testing solution that offers battery management software and numerous accessories to offer a complete battery testing package. The IBEX-Pro accurately and...

Eagle Eye Eagle Eye IBEX-Ultra Portable Resistance Battery Tester

The Eagle Eye IBEX-Ultra Portable Resistance Battery Tester is the premier kit in Eagle Eye's IBEX-Series portable battery tester line. The IBEX-Ultra is the fastest battery tester in the industry today, providing...

Megger Megger BGL Battery Ground-Fault Locator

The Battery Ground-Fault Locator (BGL) simplifies the tracking of ground faults on floating dc-powered control systems.   It features automatic operation, can be used on live battery systems and has the unique...

  • Megger
Megger Megger BVM (Battery Voltage Monitor)

The Megger BVM is a battery voltage measurement device that is used for the capacity testing of large, industrial battery banks commonly found in electrical power sub-stations, telecom facilities and computer data center UPS...

  • Megger
Megger Megger Torkel 820 12, 24, 48 Volt DC Battery Load Unit

The Megger Torkel 820 Battery Load Unit features a unique design that combines efficiency with portability. Using TORKEL 820 you can discharge 24 and 48 V batteries at a current of 270 A, and 12 V batteries at 135 A. Moreover...

  • Megger
Megger Megger TORKEL 900 Battery Load Unit

The Megger TORKEL 900 series is used to perform load/discharge testing which is the only way to determine battery systems actual capacity. Together with the optional cell voltage logger, BVM, connected directly to the TORKEL...

  • Megger
Storage Battery Systems Storage Battery Systems EX Internal Resistance Tester

The Storage Battery Systems EX Internal Resistance Tester are digital battery diagnostic testers meeting all IEEE recommendations for stationary battery applications. They are used in the telecommunications, utility and...