Fluke 6270A Pressure Controller/Calibrator
- Pressure range: Vacuum to 20 MPa (3000 psi)
- Control precision: Up to ±0.001% of range
- Accuracy: As low as ±0.01% of reading
Additel 762 Automated Hydraulic Pressure Calibrator
- Pressure range: 0–10,000 psi
- Accuracy: ±0.01% FS
- Control stability: ≤0.005% FS
King Nutronics 3750 Portable Pressure Calibrator
- The U.S. Navy’s hand pump of choice for shipboard calibration on all of its ships and submarines
- Pneumatic and hydraulic pressure output from one pump
- Constructed with stainless steel and advanced corrosion protection
Fluke 700PTP-1 Pneumatic Test Pump
- Pump can be easily cleaned without disassembly
- The vernier can be used as a stand-alone low pressure calibration source
- Two pressure ports allowing simultaneous connection:
Fluke 729 Pro Automatic Pressure Calibrator
- Pressure Control: -13 – 1,000 psi
- 6 built-in pressure modules
- 70 bar, up to 1000 psi
Druck PV411A Calibration Pump Kit
- Pressure: <10,000 psi
- Uses distilled water or mineral oil
- Hydraulic, pneumatic, vacuum, low-pressure hand pump functions
Beamex PGC Pressure/Vacuum Pump Kit
- Lightweight and user-friendly hand pump kit
- Pressure range of -13.7 to 510 psi (-0.95 to 35 bar)
- G1/8" and G1/4" fitting connectors
Druck DPI 802 Pressure Calibrator
- Pressure: ±0.36 psi to 10,000 psi
- Accuracy: 0.1% FS to 0.05% FS
- Loop calibration: 0–55 mA with 24 V supply
Druck DPI610E Pressure Calibrator Series
- Range: Vacuum to 1000 bar
- Accuracy: 0.025% FS
- Loop power: 24 V mA
Druck DPI 800 Pressure Indicator
- Pressure: ±0.36 psi to 10,000 psi
- Accuracy: 0.1% FS to 0.05% FS
- Stability: ≤0.02% reading per year
Druck DPI 611 Hand-held Pressure Calibrator Series
- Range: −14.5 to 300 psi
- Accuracy: ±0.0185% FS
- I/O: pressure + mA/V
Druck DPI 610 Series Portable Hydraulic Pressure Calibrator
- Ranges -14.7 to 10,000 psi
- Accuracy from 0.025% full scale (FS)
- Pressure + mA/V testing
Crystal Engineering CrystalCalHP Calibration System
- Gauge, chart recorder, transmitter, and calibration system
- 7 to 10 times faster than most deadweight testers
- Reduce transcription / calculation errors
Additel 920 Calibration Hand Pump
- Generate 95% vacuum to 3,000 psi (200 bar) pressure
- Generate 3,000 psi (200 bar) in 40 seconds
- Minimal maintenance
Additel 917 Pneumatic Pressure Test Pump
- Range: 95% vacuum to 1,000 psi (70 bar)
- Resolution: 10 Pa (0.1 mbar)
- Probe & carrying case
Additel 793
- Range: 0 - 15,000 psi (0 - 1,000 bar)
- Accuracy: 0.01% RD or 0.01% FS
- Stability: <0.005% FS
Additel 783 Pressure Controller
- Pressure: −14.35 psi to 3,600 psi
- Accuracy: 0.02% FS or 0.01% RD
- Control stability: ≤0.003% FS
Additel 780 Pressure Calibrator
- Pressure range: Vacuum to 3,000 psi
- Accuracy: 0.02% FS or 0.01% of reading
- Control stability: 0.003% FS
Additel 773 Pressure Controller/Generator
- Range: −380 to 400 inH₂O
- Accuracy: 0.02% FS
- Control stability: 0.003% FS
Additel 760 Automatic Handheld Pressure Calibrator
- Range: ±30 inH₂O to 300 psi
- Accuracy: 0.02% FS
- Stability: <0.005% FS
Fluke 729 Series Automatic Pressure Calibrator
- 30G: −12.0000 - 30.0000 psi
- 150G: −12.000 - 150.000 psi
- 300G: −12.000 - 300.000 psi
Fluke 7250LP Low Pressure Calibrator
- 10 inH2O and 30 inH2O
- 20 inH2O and 60 inH2O
- 35 inH2O and 100 inH2O
Fluke 7250 Series Pressure Controller/Calibrators
- Range: up to 3,000 psia
- Accuracy: to ±0.005% of reading
- Control: ±0.001% FS, ≤20 s response
Fluke 719Pro Series Electric Pressure Calibrator
- 30G: −12 - 30 psi
- 150G: −12 - 150 psi
- 300G: −12 - 300 psi
Additel 673 Digital Pressure Calibrator
- Pressure: Vacuum to 60,000 psi
- Accuracy: Up to 0.01% FS or 0.1% RD
- Protection rating: IP67