Related Products
Teledyne API N500 CAPS NOx Gas Analyzer
- NO2, NOx, and NO
- < 60 seconds to 95%
- 0 - 1,000 ppb full scale
TSI Q-TRAK 7585 Indoor Air Quality Monitor
- 0 - 500 µg/m3
- ±10μg/m3 (0 - 100μg/m3)
- ± 50 ppm
mPower Electronics POLI MP400P
- O₂, LEL, CO, H₂S, and VOCs
- 0–30% O₂, 0–100% LEL
- 0.1 ppm / 0.1% LEL Resolution
Teledyne API T640 PM Mass Monitor
- Measures PM₁₀, PM₂.₅, PM₁₀–₂.₅
- 0.1–10,000 µg/m³ range
- ±0.5 µg/m³ precision (1-hr avg)
Arizona Instrument Jerome J405 Gold Film Mercury Vapor Analyzer
- Detects Hg (Mercury vapor)
- 0.5 – 999 µg/m³ detection range
- 0.01 µg/m³ resolution
Teledyne API 651 Ultrafine Particle Monitor
- Detects particles 7–600 nm
- 0–1,000,000 particles/cm³
- ±10% at 1M particles/cm³
Industrial Scientific Radius BZ1 Area Monitor
- Gases: LEL, O₂, CO, H₂S, VOCs, more
- Range: Up to 100% LEL, 0–1,000 ppm CO
- Accuracy: ±3–5%; 0.1 ppm res (gas dependent)
Teledyne PS500 Portable 5 Gas Monitor
- Detects LEL, O₂, CO, H₂S, toxics
- 0–100% LEL, 0–25% O₂, 0–1,000 CO, 0–100 H₂S
- Resolution: ±1 ppm / ±0.1% (typical)
Teledyne PS200 Portable 4 Gas Monitor
- Detects LEL, O₂, CO, H₂S
- 0–100% LEL, 0–30% O₂, 0–1,000 CO, 0–100 H₂S
- ±1 ppm / ±0.1% resolution (typical by sensor)
Macurco PM400 Multi-Gas Monitor
- Easy-to-read LCD display
- Single button operation
- Rugged, high visual housing
mPower Electronics mPlatoon
- Detects O₂, LEL, H₂S, CO, VOCs
- 0–30% for O₂, 0–100% LEL
- ±1% FS for O₂ and LEL, ±3% FS for VOCs
Arizona Instrument Jerome J431-X Mercury Vapor Analyzer
- Detects H₂S (Hydrogen Sulfide)
- 0.003 – 50 ppm detection range
- ±0.002 ppm resolution
RKI GX-2012 Confined Space Multi-Gas Monitor
- CH₄, O₂, CO, H₂S, LEL
- Range: 0–100% Vol/LEL
- Accuracy: ±5%, 0.1 ppm resolution
Gasmet GT5000 Terra Portable Gas Analyzer
- CO₂, CO, H₂O, VOCs & more
- 0 ppm - 100 vol%
- Resolution: 0.1 ppm within ±2% of reading
Teledyne GMI OXYGAS P-500
- Gases Detected: O₂, flammable gases, CH₄
- O₂: 0–25%, LEL/Vol: 0–100%, CH₄: 0–1,000 ppm
- O₂: 0.1–1%, LEL: 0.1–1%, CH₄: 5 ppm
Vaisala GM70 Hand-Held Carbon Dioxide Meter
- 0 ... 2000 ppm
- +0.15% of reading/hPa
- -0.3 % of reading / °C
MSA ALTAIR 5X Multi-Gas Detector
- Detects combustible gases in LEL and/or volume percentage range, oxygen, carbon monoxide, carbon dioxide, hydrogen sulfide, sulfur dioxide, ammonia, chlorine, VOCs, and more
- Rugged over-molded polycarbonate housing provides unsurpassed durability, including ability to survive 10-ft. (3m) drop; IP65-certified
- Field-proven integral pump provides consistent gas flow, eliminating concerns of externally-attached components
Thermo Fisher Scientific 43iQ Sulfur Dioxide Analyzer
- Gas Detected: SO₂
- Range: 0–100 ppm
- Accuracy / Resolution: ±1% FS, 2 ppb limit
Teledyne API 430 Compact Ozone Monitor
- Gases Detected: Ozone (O₃)
- Concentration Range: 0–20,000 ppb O₃
- Accuracy / Resolution: ±0.5 ppb or 0.5%
Thermo Fisher Scientific 42iQ
- Predictive Diagnostics Address problems before they occur with improved serviceability and plug and play components. 24/7 access to analyzer’s information helps
- Address problems before they occur with improved serviceability and plug and play components. 24/7 access to analyzer’s information helps minimize troubleshooting time with
- Proactive Communications Maintain optimum performance through iQ360 and email alerts. When subscribed to iQ360 service, your instrument communicates directly to our
Teledyne API T200M Chemiluminescence Nitrogen Oxides Analyzer
- NO, NO₂, NOx
- Ranges: 0-1 ppm to 0-200 ppm
- Lower Detectable Limit: < 40 ppb
Teledyne API N904 BTEX Analyzer
- 0–1 ppb to 0–200 ppb
- Gas Chromatography w/ PID
- Benzene, Toluene, Ethylbenzene, Xylenes
Teledyne API N901 Hydrocarbon Gas Analyzer
- Measures THC & CH₄
- 0–5 ppm to 0–1,000 ppm
- FID w/ GC methane separation
Teledyne API T300M Gas Filter CO Analyzer
- 0–5 ppm to 0–5,000 ppm
- Flow Rate: 800 cc/min ±10%
- < 70 seconds to 95% of step change
Teledyne API T101 UV Fluorescence H2S Analyzer
- H₂S: 0–50 ppb to 0–10,000 ppb
- Detection Limit: < 0.4 ppb
- Flow Rate: 650 cc/min ±10%