Olympus 35RDC Composite Damage Checker

The Olympus 35RDC Composite Damage Checker is a thickness gauge with a 0.63 mm - 22.8 mm thickness range and a transducer frequency of 5MHz. Olympus 35RDC thickness gauges are simple Go/No-Go ultrasonic instruments designed to detect subsurface defects caused by impact damage on solid laminate aircraft composite structures. The Olympus 35RDC features a backlit LCD that displays the word GOOD if no subsurface damage is found or the word BAD when it detects subsurface damage. Olympus 35RDC models utilize an ultrasonic transducer that can be placed or scanned on the area of composite material suspected of having impact damage. Weighing only 0.24 Kg (8.5 oz.) and featuring a simplified keypad, this rugged ultrasonic instrument is easy to operate and requires minimal training.

Product Info Related Products

Environmental IP65 compliant	Splash-proof, impact-resistant case. Sealed, color-coded keypad
Operating Temperature Range	-10° C to +50° C (+14° F to 122° F)
Size: (W x L x H)	84 mm x 152 mm x 84 mm (3.31 in. x 6.0 in. x 1.50 in.)
Weight	0.24 kg (8.5 oz)
Standard Inclusions	Wrist strap, 3 AA batteries, 5 MHz transducer, transducer cable, couplant, carrying case, rubber protective boot with neck strap, instruction manual
Display Modes	Digital readout good, bad or beyond CAL thickness Advanced user setting shows A-scan or waveform. For use by qualified NDT personnel only
Thickness Measurement Range	0.63 mm to 22.8 mm (0.025 in. to 0.900 in.)
Material Velocity	Fixed velocity for carbon fiber aerospace composite
Transducer Frequency	5.0 MHz
Measurement Update Rate	20 Hz
Deviation alarm set points	Programmable +/- from calibration point. Set in advance setup

For use on solid laminate structure aerospace composites
Simple one-button calibration
Thickness range 0.63 mm to 22.8 mm (0.025 in. to 0.900 in.)
Simple Good/Bad/Beyond Cal display readout
Back light matrix display with user help text
AA battery operation
Handheld, weighing only 0.24 Kg (8.5 oz.)
Energy saving Auto Power o! feature
Long battery life, 150 hours typical
Battery life indicator

SKU: OLYM-35RDC

DeFelsko PosiTector 200 Series Coating Thickness Gauges

0.5 - 300 mils range
Polyurea, asphalitic neoprene, thick polymers, etc.
Range limits apply to polymer coatings

Olympus Magna-Mike 8600 Magnetic Thickness Gage

Two new durable probe designs: Straight and Right Angle
Replaceable Wear Caps: Standard and Chisel tip
Expanded target selection – 3/16 and 1/4 in. magnetic target balls – Wire target

Danatronics MTG-99 Extended Range Magnetic Thickness Gauge

Measures the Thickness of All Nonferrous Materials
Nondestructive Measurements
0.0001” to 1” Thickness Range

DeFelsko PosiTector 6000 Coating Thickness Gauge

60+ Readings Per Minute
250 Readings Per Probe
Offers Screen Capture

Dakota Ultrasonics DFX-7+ Flaw Detector & Thickness Gauge

Flaw Detector Automatic: probe zero, probe recognition, and temperature compensation Measurement: variety of modes to address a number of applications Large data storage with multiple
Automatic: probe zero, probe recognition, and temperature compensation
Measurement: variety of modes to address a number of applications

Olympus 45MG Ultrasonic Thickness Gage

Compatible with full line of Olympus dual element transducers for thickness measurements on internally corroded metals
Min./Max. mode
Two Alarm modes

Olympus 38DL PLUS Ultrasonic Thickness Gauge

Dual and single element transducer compatibility
Wide thickness range: 0.08 mm (0.003 in.) to 635 mm (25 in.) depending on material and transducer selection
Corrosion thickness gaging with dual element transducers

Dakota Ultrasonics PZX-7 Precision Thickness Gauge

Transducer Types: Single delay line & contact styles; selectable diameters for contact style
High Speed Scan: Display the lowest reading found during a scan. Scan speed at 100Hz
Differential Mode: Display the +/- difference from a nominal value entered

Danatronics ECHO 9 Ultrasonic Thickness Gauge

Simultaneous Live Color A-Scan and Thickness Display.
3.5” Sunlight readable color display.
Field upgradeable software options include.

Krautkramer Branson DME DL Handheld Ultrasonic Thickness Gauge

Elcometer Instruments PTG Precision Ultrasonic Material Thickness Gauge Series

Echo-Echo ThruPaintTM (E-E) Interface Echo (I-E) & Plastic Mode (PLAS)measurement modes
Measurement range from 0.15mm (0.006") to 25.40mm (1.00")
2-Point, 1-Point, Material, Velocity & Factory Calibration options

Olson Instruments IES Concrete Thickness Gauge

Thickness accuracy ± 2% at high resolution when calibrated on a known thickness
Thousands of tests can be performed per hour when “imaging” of internal concrete conditions is required
System is compact, durable, and easily transported allowing for multiple tests per day

Olson Instruments CTG-2 Concrete Thickness Gauge

Ruggedized, hand-held test head with integrated displacement transducer and solenoid impactor
No coupling agents required for use of test of concrete
Works on cured, hardened concrete of an elevated deck or on grade

Tritex 3000 Underwater Thickness Gauge

Intelligent Probe Recognition (IPR)
Automatic Measurement Verification (AMVS)
Ignores coatings up to 6mm thick using multiple echo and up to 20 mm with Coating Plus+ selected

NDT Systems TG110-DL Miniature Ultrasonic Thickness Gage Package

Automatic Probe Recognition system
A series of 10 transducers ranging from 2.25MHz to 10MHz
Single and two-point calibration

Dakota Ultrasonics ZX Series Thickness Gauge

Zero: Manual or auto zero option
Probe Types: Selectable probe frequency & diameter for improved linearity
High Speed Scan: Display the lowest reading found during a scan - scan speed at 100Hz

Demeq QC5 DLC Coating Thickness Gauge

Measure over ferrous and non-ferrous bases
9 calibration modes
dmq probes with CalTag technology

Danatronics EHC-09DLCW Digital Ultrasonic Thickness Gauge

Live simultaneous color waveform and thickness display.
Vibration and color change on alarm.
Control of gain, blanking, range, RF and rectify modes.

Danatronics MTG-99 Magnetic Thickness Gauge

Measures the Thickness of All Nonferrous Materials
Nondestructive Measurements
0.0001” to 1” Thickness Range

Olympus 37DL Plus Ultrasonic Thickness Gage

Thru-Coat™ technology measures and displays the thickness of the metal part and its coating using a "single backwall echo".
Temperature Compensation feature adjusts the material velocity for changes in material temperature.
Optional Oxide/Scale feature measures and displays the thickness of the steel and the oxide/scale build-up.

Cygnus Instruments Underwater Ultrasonic Thickness Gauge

6 mm (0.25 inch) 5 MHz
13 mm (0.5 inch) - 2.25, 3.5 or 5 MHz
19 mm (0.75 inch) - 2.25 MHz

Dakota Ultrasonics DFX-8 Flaw Detector and Thickness Gauge

Flaw Detector Features TRIG: Trigonometric display of beam path, depth, surface distance, and curved surface correction - used with angle beam transducers DAC: Up to 16 points may be entered
TRIG: Trigonometric display of beam path, depth, surface distance, and curved surface correction - used with angle beam transducers
DAC: Up to 16 points may be entered and used to digitally draw a DAC curve - reference -2, -6, -10, (-6/-12), (-6/-14), (-2/-6/-10) dB

Krautkramer Branson CL3 DL Portable Ultrasonic Thickness Gauge

Cygnus Instruments DIVE Underwater Ultrasonic Thickness Gauge

2.25 MHz = 3.0 to 250 mm
3.5 MHz = 2.0 to 150 mm
5.0 MHz = 1.0 to 50 mm

Checkline TI-25MX Ultrasonic Wall Thickness Gauge

Includes NIST Traceable Calibration Certificate)
Switch-selected units for inches or mm
User-selected Manual or Auto Zero of Transducer