Offering up to 1 GHz bandwidth and 5 GS/s sample rate, the Tektronix DPO4104 1 GHz Digital Oscilloscope 1 GHz, 5 GS/s delivers the performance you need to see fast-changing signal details. With as many as 20 channels, you can analyze analog and digital signals with a single instrument. Combine that with automated serial and parallel bus analysis, innovative Wave Inspector® controls, and automated power measurements, and the DPO4104 provides the feature-rich tools you need to simplify and speed debug of your complex design.
Features
- 1 GHz, 500, 350 MHz Bandwidth Models
- 2 and 4 Channel Models
- Sample Rates Up to 5 GS/s on All Channels
- 10 Megasample Record Length on All Channels
- Wave Inspector Controls Provide Unprecedented
Efficiency in Waveform Analysis - I2C, SPI, CAN Serial Triggering and Analysis
- 10.4 in. (264 mm) XGA Color Display
- Small Footprint and Lightweight – Only 5.4 in.
(137 mm) Deep and 11 lbs. (5 kg) - USB and CompactFlash on Front Panel for Quick
and Easy Storage - Built-in Ethernet Port
- Plug ‘n’ Play Connectivity and Analysis
Software Solutions - USB 2.0 Device Port for Direct PC Control of
Oscilloscope Using USBTMC - Suite of Advanced Triggers
- e*Scope® Remote Viewing and Control
- Interoperability with Tektronix Logic Analyzers
- TekVPI™ Probe Interface Supports Active,
Differential and Current Probes for Automatic
Scaling and Units
Specifications
Vertical System
| Input Channels | 4 |
| Analog Bandwidth (–3 dB) | 1 GHz |
| Calculated Rise Time | 350 ps |
| Hardware Bandwidth Limits | 20 MHz or 250 MHz |
| Input Coupling | AC, DC, GND |
| Input Impedance | 1 MΩ ±1%, 50 Ω ±1% |
| Input Sensitivity, 1 MΩ | 1 mV/div to 10 V/div |
| Input Sensitivity, 50 Ω | 1 mV/div to 1 V/div |
| Vertical Resolution | 8 bits |
| Max Input Voltage, 1 MΩ | 250 VRMS with peaks ≤±400 V |
| Max Input Voltage, 50 Ω | 5 VRMS with peaks ≤±20 V |
| DC Gain Accuracy | ±1.5% with offset set to 0 V |
| Offset Range | 1 mV/div to 50 mV/div ±1 V
50.5 mV/div to 99.5 mV/div ±0.5 V
100 mV/div to 500 mV/div ±10 V
505 mV/div to 995 mV/div ±5 V
1 V/div to 5 V/div ±100 V
5.05 V/div to 10 V/div ±50 V |
| Channel-to-Channel Isolation | ≥100:1 at ≤100 MHz and ≥30:1 at >100 MHz up to the rated bandwidth
(Any Two Channels at Equal Vertical Scale) |
Horizontal System
| Maximum Sample Rate (all channels) | 5 GS/s |
| Maximum Record Length (all channels) | 10 M points |
| Maximum Duration at Highest Sample Rate (all channels) | 2 ms |
| Timebase Range (s/div) | 400 ps to 1,000 s |
| Timebase Delay Time Range | –10 divisions to 50 s |
| Channel-to-channel Deskew Range | ±100 ns |
| Long Term Sample Rate and Delay Time Accuracy |
±5 ppm over any ≥1 ms interval |
| Delta Time Measurement Accuracy | ±(1/sample rate + 5 ppm x |Reading| + 0.4 ns) |
Applications
- Embedded Design and Debug
- Investigation of Transient Phenomena
- Power Measurements
- Video Design and Debug
- Spectral Analysis
- Automotive Electronics Design and Debug
- Manufacturing Test and Quality Control
- Electro-mechanical Design and Analysis
- Bio-medical Product Development
- Industrial Control