High Voltage Inc. VLF-90CMF High Voltage VLF Hipot Tester
- 90 kV peak output
- For testing cables rated to 69 kV
- Input: 230 V, 50/60 Hz, 20A peak, 15A average
High Voltage Inc. VLF-12011CMF
- 0 - 120 kVac peak output
- For testing cables rated to 115 kV
- Input: 230 V, 50/60 Hz, 30A peak, 25A average
Megger VLF Sinus 62 kV Cable Tester
- 0 - 62 kV peak output
- For testing cables rated to 35 kV
- Integrated tan delta testing
HV Diagnostics HVA60 VLF & DC Hipot Tester
- 62 kV peak, 44 kV RMS @ 40 mA
- For testing cables rated to 35 kV
- Input voltage: 110 - 240 VAC ±10% (50/60Hz)
Phenix Technologies 610-20P Benchtop AC Dielectric Test Set 10 kV
- One-piece design
- Circuit breaker protection
- External interlock provision
High Voltage Inc. PFT-652CM(F) Portable AC Hipot
- Voltage: 0 – 65kV AC, 2.0 kVA resistive load
- Distortion: Less than 5%
- Duty: 2 kVA: 1 hour ON, 1 hour OFF
High Voltage PTS-200 Portable DC Test Set
- 0 – 200kV DC @ 5mA
- Negative Polarity
- Positive Ground
High Voltage ALT-130/60 AC High Voltage Aerial Lift Dielectric Test Set
- 0-130kV AC / 0-60kV AC
- 50mA (100kV Tap), 100mA (50kV Tap)
- 3.6kVA resistive, Up to 7.2kVA capacitive load
Hipotronics 880PL-HD Digital | 80kV
- 80000 VDC
- Up to 10 mA
- Up to 40 GΩ
High Voltage PFT-1003CM Portable AC Hipot Tester
- Voltage: 0 – 100kV AC
- Current: Up to 30 mA current
- Duty: 3kVA: 1 hour ON, 1 hour OFF
High Voltage PTS-100 | 100 kVA, 10 mA
- 0 – 100kV DC @ 10mA
- Negative Polarity
- Positive Ground
Phenix Technologies PAD-10-25 AC/DC Hipot Megohmmeter
- 0 - 10kV AC @ 10mA / 0 - 25kV DC @ 5mA
- Negative Output
- Positive Ground
Megger VLF Sine Wave 34 kV Medium Voltage Diagnostic Test Set
- High test capacity of 5 µF
- Suitable for outdoor use (IP 54)
- Single-button operation
High Voltage Inc. VLF-65E VLF Hipot Tester
- 0 - 65 kV Peak, 46 kV RMS @ 28 mA
- For testing cables rated to 35 kV
- Tan delta testing with add-on
High Voltage Inc. VLF-65CMF High Voltage VLF Hipot for Long Cable Runs
- Portable and affordable
- All models feature a true sinewave output
- Waveform is independent of load capacitance between 0.01 F and maximum load
High Voltage Inc. VLF-6022CM(F) High Load Capacity VLF Hipot
- Portable and affordable
- All models feature a true sinewave output
- Waveform is independent of load capacitance between 0.01 F and maximum load
High Voltage Inc. VLF-50CMF Highest Voltage VLF Hipot for Long Cable Runs
- Portable and affordable
- All models feature a true sinewave output
- Waveform is independent of load capacitance between 0.01 F and maximum load
High Voltage Inc. VLF-4022CM(F) High Load Capacity Portable VLF Hipot
- Portable and affordable
- All models feature a true sinewave output
- Waveform is independent of load capacitance between 0.01 F and maximum load
High Voltage Inc. VLF-34E VLF Hipot Tester
- 0 - 34 kV Peak, 24 kV RMS @ 7 mA
- For testing cables rated to 25 kV
- Tan delta testing with add-on
High Voltage Inc. VLF-30CM(F) Portable Cable Tester
- Portable and affordable
- All models feature a true sinewave output
- Waveform is independent of load capacitance between 0.01 F and maximum load
Seba KMT VLF 27 Portable Test System 27 kV
- The weight of 50 kg make the VLF Test System 27 kV a powerful, universal and at the same time portable unit.
- The patented change over principle in combination with the recycling of energy stored in the cable capacity results, in comparison to other methods, in a lower weight, less energy consumption and
- The high test capacity of 3 uF permits the simultaneous testing of all three phases.
High Voltage Inc. VLF-200CMF Highest Voltage VLF Hipot with Cable Burn Mode
- HV on/off
- Motorized voltage control
- Zero start interlock
High Voltage Inc. VLF Series Hipot Testers
- 30 kV – 200 kV
- 0.4 µF – 50 µF
- > 50 miles
Vitrek V60 Programmable AC-DC Hipot / Electrical Safety Tester Series
- Fully automated testing at the touch of a button or via RS232 & PLC control (GPIB optional)
- Three models to choose from - select the functions you need to get the job done
- Available Quicktest™ test automation software for your PC
Kikusui TOS5300 Series AC/DC Hipot Testers
- Reduces tact time; capable of setting the test time from 0.1s
- High-efficiency PWM switching amplifier provides a stable output of high voltage without being affected by AC line variation
- Rise/fall time control function of the applied voltage
