High Voltage Inc. VLF-12011CMF High Voltage VLF Hipot with Cable Burn Mode
- Portable and affordable
- All models feature a true sinewave output
- Waveform is independent of load capacitance between 0.01 F and maximum load
Megger VLF Sinus 62 kV Cable Tester
- VLF Sine Wave: 0 … 44 kV (RMS) / 0 ... 62 kV (peak)
- DC Voltage Output: ± 0 … 62 kV
- Source Output Current: 0 … 40 mA
High Voltage TD-65E Tan Delta Cable Tester
HV Diagnostics HVA60 4 in 1 Universal High Voltage VLF and DC Hipot Tester
- VLF (0.1Hz), DC (±), Cable Fault Conditioning (Burning), and Sheath/Jacket Testing modes all included.
- VLF: the proven and accepted replacement for the traditional DC Hipot or “proof” test for solid dielectric cables such as XLPE and EPR
- Fully Automatic or manual cable test sequences complying with International Standards/Guides
High Voltage, Inc. VLF-34E | 34 kV
Megger VLF Sine Wave 34 kV Medium Voltage Diagnostic Test Set
- High test capacity of 5 µF
- Suitable for outdoor use (IP 54)
- Single-button operation
High Voltage TD-34E Tan Delta Cable Tester
High Voltage Inc. VLF-65E Portable VLF Hipot
- 100 VAC to 265 VAC
- 50/60 Hz
- 20 A
High Voltage Inc. VLF-200CMF Highest Voltage VLF Hipot with Cable Burn Mode
- HV on/off
- Motorized voltage control
- Zero start interlock
High Voltage Inc. VLF Series Hipot Testers
- 30 kV – 200 kV
- 0.4 µF – 50 µF
- > 50 miles
High Voltage Inc. VLF-50CMF Highest Voltage VLF Hipot for Long Cable Runs
- Portable and affordable
- All models feature a true sinewave output
- Waveform is independent of load capacitance between 0.01 F and maximum load
High Voltage Inc. VLF-30CM(F) Portable Cable Tester
- Portable and affordable
- All models feature a true sinewave output
- Waveform is independent of load capacitance between 0.01 F and maximum load
Seba KMT VLF 27 Portable Test System 27 kV
- The weight of 50 kg make the VLF Test System 27 kV a powerful, universal and at the same time portable unit.
- The patented change over principle in combination with the recycling of energy stored in the cable capacity results, in comparison to other methods, in a lower weight, less energy consumption and
- The high test capacity of 3 uF permits the simultaneous testing of all three phases.
High Voltage Inc. VLF-65CMF High Voltage VLF Hipot for Long Cable Runs
- Portable and affordable
- All models feature a true sinewave output
- Waveform is independent of load capacitance between 0.01 F and maximum load
Megger EasyTest 20 kV Cable Tester
- Easy to operate
- Configurable test sequences
- Compact, rugged, and lightweight design
High Voltage Inc. VLF-4022CM(F) High Load Capacity Portable VLF Hipot
- Portable and affordable
- All models feature a true sinewave output
- Waveform is independent of load capacitance between 0.01 F and maximum load
HV Diagnostics HVA 30 4 in 1 Universal High Voltage VLF and DC Hipot Tester
- Smallest, lightest, most advanced universal high voltage test instrument available.
- VLF (0.1Hz), DC, Cable Fault Conditioning (Burning), and Sheath/Jacket Testing modes all included.
- Fully Automatic or manual cable test sequences
High Voltage Inc. VLF-90CMF High Voltage VLF Hipot
- Portable and affordable
- All models feature a true sinewave output
- Waveform is independent of load capacitance between 0.01 F and maximum load