Y.I.C. Technologies EMScannerR
- Frequency: 150 kHz – 8 GHz
- EMC analyzer for EMI emissions or PCB
- Capability: Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, report generation and notes
Y.I.C. Technologies EMScanner
- Frequency: 150 kHz to 8 GHz
- EMC analyzer for EMI emissions or PCB
- Capability: Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, and report generation.
Y.I.C. Technologies EMProbe
- Frequency: Up to 13 GHz with the supplied Y.I.C. Technologies probes
- For component side of the PCB along with the EMscanner
- Capability: spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines, and report generation
Advanced Amplifiers AA-LNP4050G-24 Low Noise Preamplifier
- 40 - 50GHz
- 24dBm min
- 26dB typ
Advanced Amplifiers AA-LNP1840G-27 Low Noise Preamplifier
- 18 - 40GHz
- 27dBm min
- 30dB (min)/40dB (max)
Amplifier Research APS-2 Antenna Positioner Stand
- Ideal for pre-compliance
- Maneuverable
- Remote controlled polarization
Montena MOL3000 Optical Link
- Bandwidth (±1.5dB): 80Hz - 3.5GHz
- Link gain (80Hz - 2.2GHz): 0dB ± 1.0dB
- Link gain (2.2 - 3.5GHz): 0dB ± 1.5dB
Advanced Amplifiers AA-LNP50M6G-25 Low Noise Preamplifier
- 50MHz - 6GHz
- 25dBm min
- 30dB typ
Advanced Amplifiers AA-LNP10M18G-20 Low Noise Preamplifier
- 10MHz - 18GHz
- 20dBm min
- 30dB typ
Y.I.C. Technologies NFPKit
- 10MHz - 13GHz
- Handheld EMI probe
- Live real-time probe position tracking to identify location of EMI
AH Systems PAM-0126 Broadband Preamplifier
- Frequency Range: 20MHz - 26.5GHz
- Gain: 32dB (Typical)
- Input Power: 110/220VAC
Com-Power CLCE-1032 RF Current Probe | 9 kHz – 1000 MHz
- Frequency range of 9 kHz to 1000 MHz
- Suitable for CISPR, MIL-STD-461, and DO-160
- Individual calibration
Advanced Amplifiers AA-LNP118G-30 Low Noise Preamplifier
- 1 - 18GHz
- 1W
- 30dB min
Advanced Amplifiers AA-LNP9K1G-33 Low Noise Preamplifier
- 9kHz - 1GHz
- 2W
- 33dB min
AH Systems PAM-0202 Preamplifier
- Frequency Range: 20MHz - 2GHz
- Gain: 30.4dB (Typical)
- Input VSWR (Typical): <1.5:1
Com-Power CGO-505 Comb Generator, 5 MHz - 1 GHz
- Frequency range of 5 MHz to 1 GHz
- Stable frequency output
- Automatic low voltage signal shutoff
Solar 9123-1N Current Monitor Probe
- 10kHz – 500MHz
- 1.0 – 5.0 Ω above 150kHz
- Type N, Female
Keysight 11947A Transient Limiter | 9 kHz – 200 MHz
- Impedance 50Ω
- Frequency range of 9 kHz - 200 MHz
- Insertion loss of 10 dB
Keysight 11941A Close Field Probe | 9 kHz - 30 MHz
- Designed to measure magnetic-field radiation from surface currents, slots, cables, and ICs for EMC diagnostic and troubleshooting measurements.
- Operates from 9 kHz to 30 MHz
- Five antenna factors for calculating absolute magnetic-field strength (dBµA/m) from dBµV reading of a spectrum analyzer.
Keysight 11940A Close Field Probe | 30 MHz - 1 GHz
- Designed to measure magnetic-field radiation from surface currents, slots, cables, and ICs for EMC diagnostic and troubleshooting measurements.
- Operates from 30 MHz to 1 GHz
- Five antenna factors for calculating absolute magnetic-field strength (dBµA/m) from dBµV reading of a spectrum analyzer.
AH Systems PAM-5K300 Low Frequency Preamplifier
- Frequency range: 5kHz - 300MHz
- Gain: 30dB
- Input Power: 100/220VAC
Pearson Electronics 110 Current Monitor Probe | 1Hz – 20MHz
- Current monitor probe
- Robust peak current capacity of 5 kA
- Frequency response reaching up to 20 MHz
Pearson Electronics 410 Current Monitor Probe
- 120 Hz – 20 MHz
- Max RMS Current: 50 A
- Max Peak Current: 5,000 A
EMCO/ETS-Lindgren 7405 E/H Near Field Probes
- Broadband Frequency Range
- Linear Response
- Locates both E and H Field
Pearson Electronics 1423 Current Monitor
- Frequency: 1 Hz - 0.7 MHz
- Max Peak Current: 500,000 A
- Current-Time Product: 75 A·s