HV Diagnostics HVA 4 in 1 Universal High Voltage VLF & DC Hipot Tester
- VLF (0.1Hz), DC (±), Cable Fault Conditioning (Burning), and Sheath/Jacket Testing modes all included.
- VLF: the proven and accepted replacement for the traditional DC Hipot or “proof” test for solid dielectric cables such as XLPE and EPR
- Fully Automatic or manual cable test sequences complying with International Standards/Guides
High Voltage Inc. PFT-503CM | 50kV
- Single-piece construction with 20 ft cable output
- Convenient one-piece field portable design
- Secondary connected 2-range voltmeter: 0 - 25 / 50 kV AC
Hipotronics 750-2/D149 AC Dielectric Test Set
- Microprocessor-based control and measurement system
- Adjustable test parameters (voltage, time, overcurrent, etc.)
- Continuous adjustable overload from 10-100% of rated current
Phenix Technologies 610-20P Benchtop AC Dielectric Test Set 10 kV
- One-piece design
- Circuit breaker protection
- External interlock provision
Phenix Technologies 605-10P Benchtop AC Dielectric Test Set
- 1-piece design
- Housed in a rugged steel enclosure
- Output voltage range of 0 to 5 kV
High Voltage PTS-200 Portable DC Test Set
- 200 kV DC, 5 mA
- Insulation Resistance up to 20 TΩ
- Full-Wave Bridge Rectifier
Associated Research 7850 HYPOTULTRA Dielectric Analyzer
- AC Hipot 0-5000VAC Leakage Current Limits = 0.000-30.00mA Output Frequency = 50/60Hz
- 0-5000VAC
- Leakage Current Limits = 0.000-30.00mA
Chroma 19032 Sentinel I Electrical Safety Analyzer
- AC Output Voltage: 0.05 - 5kV
- DC Output Voltage: 0.05 - 6kV
- Resistance Resolution: 0.1mΩ
Chroma 19036 Wound Component EST Analyzer
- 5 in 1 (10 channels) composite analyzer (ACWV/DCWV/IR/Impulse/DCR)
- Hi-pot test 5kVac / 6kVdc HSCC (High Speed Contact Check) 500 VA output
- 5kVac / 6kVdc
Hipotronics 120HVT-DI AC Digital Hipot Tester
- Voltage: 0 - 120 kV AC
- Frequency: 50/60 Hz
- Meter Accuracy: ± 1% F.S.
High Voltage Inc. PTS-130 | 130 kV
- Two range voltmeter and five range current meter with a 0-1.0 μA low range with resolution to 10 nanoamperes
- Internal HV shorting solenoid with discharge resistor
- Automatic transit protected meters
High Voltage Inc. PFT-652CM(F)
- CE Marked; designed specifically to meet CE directives
- Continuously adjustable output voltage
- Fixed overload, factory set to 120% of variable transformer rated output current
Associated Research 8104 Hipot/Ground Tester
- Dielectric Withstand Test Mode Output Rating: 5 kV @ 40mA AC and 20mA DC Voltage Setting Range: 0-5000 V AC; 0-5000 V DC Resolution: 1 V Accuracy: ± (2% of setting + 5
- Output Rating: 5 kV @ 40mA AC and 20mA DC
- Voltage Setting Range: 0-5000 V AC; 0-5000 V DC Resolution: 1 V Accuracy: ± (2% of setting + 5 volts)
High Voltage PTS-75 DC Hipot/Megohmmeter Tester 75 kV
- Rugged, reliable and contains all functions needed for periodic electrical maintenance testing & retest of recently installed electrical apparatus
- Insulation Resistance at any rated output voltage up to 7,500 GΩ
- Dual-range voltmeter and five-range ammeter with 0-1μA low scale setting & 10nA resolution for leakage current measurements
Fluke ESA620 Electrical Safety Analyzer
- Superior compliance with multiple standards: IEC60601:2005, EN62353, VDE 751, ANSI/AAMI ES1:1993, NFPA-99, AN/NZS 3551, IEC61010
- Three test loads
- Expanded leakage ranges through 10,000 μA
Vitrek 95X Series Hipot Testers
- Highest Level of Operator Safety
- High Power Output
- Wide Range of built-in Voltage Capabilities
Vitrek V74 AC/DC Hipot, IR and Ground Bond Tester
- Easy to Use 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface Large High Reliability START and STOP switches Large easy to see PASS/FAIL Indicators
- 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface
- Large High Reliability START and STOP switches
Phenix Technologies PAD-10-25 AC/DC Hipot Megohmmeter
- Lightweight, portable and enclosed in a rugged carrying case
- Large, easy to read meters
- Adjustable overcurrent trip point
Associated Research 510L LineChek Line Leakage Tester
- Input Voltage: 115/230VAC ± 15%, 1Ø
- DUT Power Voltage: 30 - 300VAC, 1Ø
- DUT Power Current: 30AAC (Max Cont.)
Chroma 19073 AC/DC/IR Hipot Tester
- Ground fault interruption shutdown the instrument when imbalance current > 0.5mA, provide the highest protection capability
- TUV approved
- CE Certified
QuadTech Sentry 50 Plus 30 Amp Ground Bond Tester
- Programmable Output Current from 3A to 30A AC
- Programmable Source Voltage from 1.0 to 8.0V rms
- Resistance Measurements from 0.1mW to 510mW
Vitrek V79 4 Wire 30A Ground Bond Tester
- Easy to Use 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface Large High Reliability START and STOP switches Large easy to see PASS/FAIL Indicators
- 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface
- Large High Reliability START and STOP switches
Fluke Biomedical Ansur Test Automation Software
- Allows creating and managing custom test protocols electronically to eliminate dependence on service manuals
- Guides users through stepwise testing process to ensure standardized testing and to minimize training
- Generates test report (PDF or MTR) per requirements with needed level of data to ensure compliance
High Voltage ALT-130/60 | 0-60 / 130 kV AC
- 120 V, 60 Hz, 30 A
- 0–130 kV AC
- Duty Cycle: 7.2 kVA
SCI 446 AC / DC / IR / Ground Bond Tester
- Max Voltage (AC): 5kV
- Max Voltage (DC): 6kV
- Ground Bond Capability: 40A
