Emerson AMS Trex Device Communicator
- HART and Fieldbus communication
- Built‑in loop power up to 22.5 mA
- Automatic documentation and audit trail
Additel 762 Automated Hydraulic Pressure Calibrator
- Pressure range: 0–10,000 psi
- Accuracy: ±0.01% FS
- Control stability: ≤0.005% FS
Fluke 6270A Pressure Controller/Calibrator
- Pressure range: Vacuum to 20 MPa (3000 psi)
- Control precision: Up to ±0.001% of range
- Accuracy: As low as ±0.01% of reading
Fluke 754 Documenting Process Calibrator-HART
- Accuracy to ±0.01% of reading
- Loop Power: 26 V DC, max 25 mA
- Voltage Measure: 0–300 V AC/DC
Fluke 6330 Compact Temperature Calibration Bath
- Stability and uniformity each better than ±0.008°C
- Metrology-level performance in lab-friendly sizes
- Convenient use on benchtops or on matching carts
Fluke 9009 Dual-Block Thermometer Calibrator
- Two independently controlled temperature blocks
- Temperatures from -15°C to 350°C in one unit
- Two wells in each block for simultaneous comparison calibrations
Fluke 9142 Field Metrology Well
- Lightweight, portable, and fast
- Cool to –25 °C in 15 minutes and heat to 660°C in 15 minutes
- Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current
Fluke 6102 Micro-Bath Thermometer Calibrator
- Small and portable with extreme stability
- Calibrates sensors of any size or shape
- Stability to ±0.015°C
Omega FOB104 Fiber Optic Thermometer
- 0 - 10V
- 4 - 20mA (optional)
- 4 channels
Fluke 2271A
- Pressure: −100 kPa to 20 MPa
- Accuracy: 0.02% of full scale
- Control: 0.001% range precision, 10:1 turndown
Additel 227 HART Communication Process Calibrator
- Accuracy: Up to ±0.005%
- 24 V loop power supply
- Dual external digital pressure module ports
Additel 226 Multifunction Process Calibrator
- −15 psi to 60000 psi pressure range at ±0.02 % FS
- −270 °C to 2315 °C thermocouples
- ±0.015 % RDG electrical measurement accuracy
Additel 221A | 222A | 223A Multifunction Temperature Calibrator
- −15 psi to 10000 psi pressure at ±0.02 % FS
- ±0.01 % electrical measurement accuracy
- −270 °C to 2315 °C thermocouples
Additel 209 / 210 Series Loop Calibrator
- Accuracy: ±0.03%
- Measure and Source: 0–24 mA
- DC Measurement: 0-30 V
Fluke 154 Multifunction HART Communicator
- Full HART Device Description (DD) support of all HART devices
- Configure HART devices
- Perform HART trim on hart devices when used with a Fluke 750 or 720 series calibrator
Additel 121 / 123 Pressure Manifolds
- Pressure: 3,000 psi (121) / 15,000 psi (123)
- Pneumatic (121) / Hydraulic (123)
- Outputs: Four hand‑tight ports
Fluke 5699 High-Temperature Metal-Sheath SPRT
- Temp Range: -200 – 661°C
- Nominal RTPW: 25.5Ω (± 0.5Ω)
- Sensitivity: 0.1 Ω/ °C
Fluke 729 Pro Automatic Pressure Calibrator
- Pressure Control: -13 – 1,000 psi
- 6 built-in pressure modules
- 70 bar, up to 1000 psi
Fluke 7341 Deep-Well Compact Bath
- Temp Range: –45°C – 150°C
- Stability: ±0.005°C at –45°C and 25°C
- Immersion Depth: 457mm w/ 15.9L fluid cap.
Omega TRCIII-A Temperature Reference Chamber Series
- Reference temperature: 0 °C (32 °F)
- Accuracy: ±0.1 °C
- Stability: ±0.04 °C (TRCIII) / ±0.03 °C (TRCIII‑A)
AMETEK RTC-700 Reference Temperature Calibrator
- High accuracy
- Intuitive, fast, and user-friendly navigation
- Excellent stability
GE Panametrics MG101 Hygrometer Calibration System
- Dew/frost point range: −103 °F to 50 °F
- Accuracy: ±1.8 °F
- Flow rate: up to 19.5 SCFH
Beamex MC6 Field Process Calibrator
- Voltage measurement: ±1V & -1... 60VDC
- Current measurement: ±100mA
- Frequency measurement: 0 - 50kHz
Beamex MC5 Multifunction Fieldbus Calibrator
- Pressure: −1 - 20 bar
- Accuracy: 0.025% RDG + 0.01% FS
- up to 50 kHz
Emerson HART Communicator 475
- HART Protocol Compatibility
- Long Battery Life
- Rugged Color Display