NetScout 1T-3000 OneTouch AT Network Assistant
- Understand performance from the client connection.
- Performance measurement from the cable to the cloud.
- Copper and fiber optic cable testing.
Fluke Versiv OneTouch AT 10G Network Assistant
- 10 Gigabit: built-in 100/1G/10G copper and 1G/10G fiber optic test ports for troubleshooting and performance measurement
- All-in-one: a handheld tester combining infrastructure, network service and end-to-end path performance measurement in one tool
- Accurate: create and save site-specific test profiles that emulate how client devices experience the network, including local, intranet and cloud-based services
Netscout OneTouch AT 10G Network Assistant - 2PK
- Versatile copper, fiber and Wi-Fi troubleshooting
- Configurable profiles for standardized testing
- OneTouch AT Model comparison
Tescom 990DSL CopperPro Loop Tester
- AC Voltage: 0 to 250V (1% ±0.5V accuracy)
- DC Voltage Range: 0 to 150V (1% ±0.5V accuracy) 150 to300 V (2% accuracy)
- 0 to 150V (1% ±0.5V accuracy)
Fluke 990VDSL CopperPro Series II Broadband Copper Loop Analyzer
- Qualification copper loop test meter tests support for POTS and high-speed digital services, including DDS, ISDN, T1, HDSL, HDSL2, HDSL4, ADSL, ADSL2, ADSL2+ and VDSL, in outside plant paired copper
- Customizable, automated tests provide pass/fail or information results that indicate the POTS and high-speed digital services subscriber lines can support
- Fault location tests and transmission tests help diagnose physical cable faults and signal transmission problems
Fluke AirCheck Wi-Fi Tester
- Supports 802.11a/b/g/n/ac
- Instant-on operation
- Get answers fast
NetScout AirCheck G2 Wireless Tester
- 802.11ac 3 stream radio
- 5” Touchscreen display
- Ethernet tests for AP backhaul verification
Netscout AirMagnet Survey with Tablet
- Design and deploy indoor & outdoor wireless LAN network (802.11n/a/b/g/ac) correctly the first time with AirMagnet wireless site survey software and prevent costly rework & IT complaints
- Collect real-world data by performing unique true end-user experience (wireless LAN throughput, data rates, retries, losses) measurements
- Minimize expensive wireless 802.11n/a/b/g/ac LAN performance impact due to RF interference sources by performing simultaneous wireless heat map spectrum analysis in a single walk through
Viavi C4000 Enterprise Services Application Module (ESAM)
- Provides Layer 1-7 protocol capture and expert analysis
- Offers wirespeed deep packet statistics and analysis
- Tests network connectivity
Fluke CableIQ Qualification Tester
- Qualifies - Tests if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
- Troubleshoots - shows why existing network cabling cannot support the network's bandwidth requirement (e.g. crosstalk at 11 meters)
- Discovers - detects what's at the end of any cable and displays device configuration (speed/duplex/pairing)
Fluke CableIQ Copper and Fiber Technician’s Kit
- Isolate cabling problems from network problems, save time and money by escalating fewer trouble tickets
- Four-second test quickly determines if your existing cabling can support voice/10/100, VoIP or Gigabit Ethernet
- Determine why the existing cabling plant cannot support the desired network speed (e.g. connection fault at 7 feet)
Fluke CIQ-100 CableIQ Network Cable Tester Kit
- Core troubleshooting features
- Advanced troubleshooting diagnostics
- Locate and trace cables with digital toning technology
Fluke DSX-5000 CableAnalyzer
- Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
- Unmatched speed for Cat 6A, Class FA, I/II and current standards
- ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Fluke DSX-600 CableAnalyzer Copper Certifier
- Cat 6A and Class EA Copper Certification
- Includes Channel Measurement Adapters; Optional rugged Permanent Link Adapters with removable test plug available
- 10 second Cat 6A test time
Fluke DSX-8000 Cable Analyzer
- Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing, and fiber end-face inspection
- Unmatched speed for Cat 6A, 8, Class FA, I/II, and all current standards
- ProjX™ system manages job requirements and progress from set-up to systems acceptance
Fluke DSX2-5000 CableAnalyzer Copper Cable Certifier
- Versiv modular design supports copper certification
- Unmatched speed for Cat 6A, 8, Class FA, I/II, and all current standards
- ProjX system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Fluke DSX2-8000 CableAnalyzer Copper Cable Certifier
- Versiv modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
- Unmatched speed for Cat 6A, 8, Class FA, I/II and all current standards
- ProjX system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly
Fluke DTX-1800 Level IV Cat 5E/6/7 Cable Analyzer & Certifier
- Increase productivity from day one. Intuitive interface means your techs spend less time in training and more time testing
- Zero to certified in 12 seconds. This unheard-of Cat 6 test speed lets you move from link to link three times faster than with previous testers
- Level IV Accuracy. Get the most accurate test results in the shortest possible time
EXFO FTB-880V2 Network Protocol Analyzer
- Comprehensive testing for DSn/PDH, ISDN, SONET/SDH, OTN, Fibre Channel (1x-16x)
- CPRI and Ethernet interfaces up to 100 Gbit/s
- Real-time, high-resolution radio frequency (RF) spectrum analysis using digitized RF data (IQ data)
EXFO FTB-1v2/Pro Single-Carrier Portable Test Platform
- FTB-1v2-Pro (A) Portable Modular mainframe with dual carrier configuration Windows 10 OS, QUAD Core CPU Multi-touch widescreen, color, 1280 x 800 TFT, 203 mm (8 in) RAM: 4
- Windows 10 OS, QUAD Core CPU
- Multi-touch widescreen, color, 1280 x 800 TFT, 203 mm (8 in)
EXFO FTB-2/Pro Platform
- FTB-2 with Features Listed Below FTB-2-PRO (A) 2-slot capacity PRO Modular mainframe Windows 10 OS, QUAD Core CPU Touchscreen, color, 1280 x 800 TFT, 256 mm (10.1
- 2-slot capacity PRO Modular mainframe
- Windows 10 OS, QUAD Core CPU Touchscreen, color, 1280 x 800 TFT, 256 mm (10.1 in) RAM: 4 GB Interfaces: RJ-45 LAN 10/100/1000 Mbit/s USB 2.0
EXFO FTB-4 Pro Platform BERT/SONET/SDH
- Connects anywhere: USB, WiFi, Bluetooth, mobile and virtual private network (VPN)
- Loaded with utilities: equipped with all the tools required to maximize field testing
- Like a PC: quad-core processor with Windows 10 operating system
EXFO FTB-700G V2 Series Mobile Network Tester
- 18 CWDM channels from single OTDR port for single-ended construction, in-service testing and troubleshooting
- iOLM-ready for one-touch multiple acquisitions, with clear go/no-go results presented in a straightforward visual format
- Combined single mode/multi-mode wavelengths
EXFO FTB-8510B Packet Blazer
- Complete EtherSAM (ITU-T Y.1564) test suite allowing full validation of today's Ethernet services (bidirectional results through dual test set)
- Throughput, back-to-back, latency and frame loss measurements as per RFC 2544 (bidirectional results through dual test set)
- Multi-stream generation and analysis, providing per-stream measurements for throughput, latency, frame loss and packet jitter
EXFO FTB-8510G Packet Blazer
- Measures throughput, back-to-back (burstability), latency and frame loss as per RFC 2544
- EtherBERT™ for bit-error-rate testing of 10 Gigabit Ethernet circuits
- Performs packet jitter measurement (IP packet-delay variation as per RFC 3393) to qualify Ethernet transport networks for transmission of delay-sensitive traffic such as voice-over-IP (VoIP)
EXFO FTBx-88200NGE Power Blazer 100G Multiservice Test Module
- Supports mixed-mapping capabilities
- Integrated CFP4 and QSFP28 interfaces for testing next-generation 100G networks
- Full-support QSFP+ interfaces for 40GE/OTU3 validation
EXFO FTBx-88400NGE Bit Error Rate Tester
- 400G Ethernet testing capabilities based on the IEEE 802.3bs standard
- State-of-the-art Open Transceiver System (OTS) design for full flexibility with current and future transceivers
- Flex Ethernet (FlexE) testing capabilities with low and high-speed Ethernet clients supported on 4xQSFP28 ports
EXFO FTBx-88460 Bit Error Rate Tester
- 400G Ethernet testing capabilities based on the IEEE 802.3bs standard
- State-of-the-art Open Transceiver System (OTS) design for full flexibility with current and future transceivers
- Flex Ethernet (FlexE) testing capabilities with low and high-speed Ethernet clients supported on 4xQSFP28 ports
EXFO FTBx-8870/8880 Power Blazer 10G Multiservice Test Modules
- FTBx-8880 10Gbit/s Power Blazer Multi-Service Module Features Supports DSn/PDH, SONET/SDH up to 10Gbit/s, Fibre Channel 1,2,4,8,10X and Ethernet up to 10GigE
- Features Supports DSn/PDH, SONET/SDH up to 10Gbit/s, Fibre Channel 1,2,4,8,10X and Ethernet up to 10GigE LAN/WAN
- Supports DSn/PDH, SONET/SDH up to 10Gbit/s, Fibre Channel 1,2,4,8,10X and Ethernet up to 10GigE LAN/WAN
IDEAL LANTEK 6 LAN Cable Certifier
- Frequency range of 350 MHz
- Level III verified LAN certification tester
- Designed to support up to CAT6/ISO-E cabling
IDEAL LanTEK III 500MHz Data Cable Certifier
- Troubleshooting features that save time and money – Locate hidden connections, splices and cable faults using Time Domain Return Loss (TDRL) and Time Domain Crosstalk (TDX).
- Permanent link adapter saves money – Reduce down time and lower maintenance costs with field replaceable RJ45 contacts.
- FiberTEK III modules – Tier 1 cable certification of fiber cabling eliminates the need for additional fiber testers.
IDEAL LanTEK IV-3000MHZ (WITH PL ADAPTERS) - R163001
- 7 second test time for Cat 6A
- Unique VisiLINQ permanent link adapters
- Certifies up to Cat 8 standards
IDEAL LanTEK IV-500MHZ (WITH PL ADAPTERS) - R163000
- 7 second test time for Cat 6A
- Unique VisiLINQ permanent link adapters
- Certifies up to Cat 8 standards
TREND Networks LANTEK-IV-S Data Cable Certifier
- 7-second test time (25 seconds for 3000 MHz tests)
- Powerful and fast Cloud-enabled certifier
- VisiLINQ™ permanent link adapters
Fluke LinkIQ Cable & Network Tester Advanced Kit
- Find maximum cabling speed (Up to 10 Gb/s)
- Install and troubleshoot PoE devices via Switch Negotiation and PoE Load Test
- Identify connected switch information (Switch Name, Port Number, and VLAN)
NetScout Network Assistant / LAN Analyzer - LinkRunner Duo Option
- Link Verification of Fiber and Copper Circuits at 10/100/1000MBps – Quickly determine if the circuit is up or not
- Performance Testing with MetroScope and other Popular Test Sets – Use as a remote device for ProVision (copyright), RFC 2544 and other performance tests
- Layer 1,2, and 3 Loopback – configurable loop back to filter frame type and swap MAC and/or IP addresses. Manual or DHCP IP configuration
NetScout LinkRunner AT 2000 Network Auto-Tester
- Accurately test and identify network connectivity problems with the 10 second AutoTest
- Network connectivity test for twisted pair and fiber optic Ethernet links at 10, 100 and Gigabit rates
- Verify twisted pair cable length and wiremap
EXFO MaxTester 605 Copper Test Set
- Automates closeout testing thanks to test script with configurable pass/fail indication
- Fast access to key measurements from the copper main menu
- Easy-to-use time-domain reflectometer (TDR) ensures any technician can locate copper faults accurately
EXFO MaxTester 630G Gfast & Broadband Network Tester
- G.fast with backwards compatibility to VDSL2 and ADSL2+, all-in-one test tool
- VDSL2 and ADSL2+ bonding enables operators to increase rates and/or reach to subscribers
- Spectrally compatible VDSL2 35b support
Anritsu MT1000A Network Master Pro | Ethernet / CPRI / OTDR
- Supported for 100G/25G Ethernet
- Supported for 100G/40G OTN
- Condensing the communication network opening maintenance technologies into one module: Ethernet, eCPIR/RoE/CPRI/OBSAI, OTN, Fibre Channel, SDH/SONET, PDH/DSn
Fluke MetroScope Service Provider Assistant - 10/100/Gig
- ProVision™ and RFC 2544 Performance Tests of 10/100/Gig Copper and Fiber Circuits
- Low-Cost Reflector tests link with a single MetroScope
- Easy to use with large VGA color touchscreen
Viavi Certifier40G Copper Cable Certifier
- Permanent link and channel adapters for certifying to TIA category 5e/6/6A and ISO class D/E/EA/F/FA
- Multimode (850/1300 nm) and singlemode (1310/1550 nm) adapters for Tier 1 fiber certification (loss/length/polarity)
- Multimode (850 nm) MPO adapters for certifying and troubleshooting MPO links and trunks
Viavi OneExpert DSL ONX-580 Modular Platform
- Test G.fast and ADSL2+/VDSL2 including bonded and vectored pairs, copper, POTS, and coax/HPNA
- A multi-touch, friendly user interface leverages user experience from smartphones and tablets
- Multiple options for one-button speed testing including Ookla and TrueSpeed™
Netscout OneTouch AT 10G Network Assistant
- Versatile copper, fiber and Wi-Fi troubleshooting
- Configurable profiles for standardized testing
- OneTouch AT Model comparison
NetScout OneTouch AT G2 Network Assistant
- Combined copper, fiber and Wi-Fi troubleshooting
- Standardized network troubleshooting and performance validation
- Automated testing and pass/fail analysis
Viavi OneExpert CATV ONX-630 Sweep & Maintenance System
- Simplifies and speeds testing
- Find root causes quickly, with one simple, quick automated process
- Quick, complete, and simple documentation with StrataSync™
NetScout OPTIVIEW-GIG Integrated Network Analyzer
- Complete network vision in seconds
- Combines seven layer protocol analysis, active discovery, SNMP device analysis, RMON2 traffic analysis and physical layer testing into a mobile solution
- Design and user interface equally effective whether the unit is carried as a portable device or placed semi-permanently on a network link
NetScout OptiView XG Network Analysis Tablet
- Integrates the latest wired and wireless technologies with powerful dedicated hardware in a unique tablet form factor providing mobility to connect, analyze and solve network and application problems
- Displays your network exactly the way you want to see it through intuitive, customizable dashboards
- Provides performance testing, on-the-wire and in-the-air automated analysis up to 10 Gbps
Viavi T-BERD 6000 Compact Optical Test Platform
- Lightweight platform at only 2.4 kg/5.3 lbs
- Large 8.4 inch transreflective TFT color display
- Graphical user interface with touchscreen option
VIAVI T-BERD/MTS 5800-100G Ethernet Network Tester
- Supports comprehensive rate testing ranging from DSx PDH (1.5M/2M) through to 112G OTU4.
- Saves time with the industry’s fastest RFC 2544 and Y.1564 SAMComplete™ Ethernet service activation test including nanosecond accurate latency measurements and supports RFC 6349
- Ensures QSFP+/QSFP28 and CFP4 modules run error-free with the field optimized Optics Self-Test.
Fluke TN2100 Copper Terminator Far End Terminating Device
- 2 Test Pair Connections
- C.O. Isolate / Bypass Pair Connection
- Open Circuit