Applicable Fibers |
Single-mode (ITU-T G.652), Multimode (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655) |
Fiber Count |
Single, 2, 4, 5, 6, 8, 10, 12 |
Cladding Diameter |
125μm |
Coating Diameter |
Ribbon: 0.25mm to 0.4mm, Single: 250μm and 900μm |
Fiber Cleave Length |
10mm |
Typical Average Splice Loss |
0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS; measured by cut-back method relevant to ITU-T and IEC standards |
Splicing Time |
Typical 20 seconds with standard single-mode fiber |
Arc Calibration Method |
Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available |
Splicing Modes |
100 preset and user programmable modes |
Splice Loss Estimate |
Based upon dual camera cladding alignment data |
Storage of Splice Result |
Last 2000 splice results stored in the internal memory |
Fiber Display |
X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation |
Magnification |
35X to 90X |
Viewing Method |
Dual cameras with 4.1 inch TFT color LCD monitor with anti-reflective coating |
Operating Condition |
0 to 3,660m above sea level, 0 to 95% RH, and -10 to 50°C respectively. |
Mechanical Proof Test |
1.96 to 2.25N |
Tube Heater |
Built-in tube heater with 30 heating modes; auto-start function |
Tube Heating Time |
Typical 50 seconds with FP-5 sleeve, 40 seconds with FP3 (40), 35-55 seconds with Fujikura micro sleeves |
Protection Sleeve Length |
60mm, 40mm, Micro |
Splice/Heat Cycles with Battery |
Typical 90 cycles with power save functions activated |
Power Supply |
Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-13, 13.2V DC with BTR-08 battery |
Terminals |
USB 1.1 (USB-B type) for PC communication, Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater |
Wind Protection |
Maximum wind velocity of 15m/s. (34 mph) |
Dimensions |
136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches) |
Weight |
2.1 kg (4.6 lbs) with AC adapter ADC-13; 2.5kg (5.5 lbs) with BTR-08 battery |