Associated Research 7850 HYPOTULTRA Dielectric Analyzer
- AC Hipot 0-5000VAC Leakage Current Limits = 0.000-30.00mA Output Frequency = 50/60Hz
- 0-5000VAC
- Leakage Current Limits = 0.000-30.00mA
Chroma 19036 Wound Component EST Analyzer
- 5 in 1 (10 channels) composite analyzer (ACWV/DCWV/IR/Impulse/DCR)
- Hi-pot test 5kVac / 6kVdc HSCC (High Speed Contact Check) 500 VA output
- 5kVac / 6kVdc
Associated Research 8104 Hipot/Ground Tester
- Dielectric Withstand Test Mode Output Rating: 5 kV @ 40mA AC and 20mA DC Voltage Setting Range: 0-5000 V AC; 0-5000 V DC Resolution: 1 V Accuracy: ± (2% of setting + 5
- Output Rating: 5 kV @ 40mA AC and 20mA DC
- Voltage Setting Range: 0-5000 V AC; 0-5000 V DC Resolution: 1 V Accuracy: ± (2% of setting + 5 volts)
Vitrek 95X Series Hipot Testers
- Highest Level of Operator Safety
- High Power Output
- Wide Range of built-in Voltage Capabilities
Chroma 19032 Sentinel I Electrical Safety Analyzer
- AC Output Voltage: 0.05 - 5kV
- DC Output Voltage: 0.05 - 6kV
- Resistance Resolution: 0.1mΩ
Vitrek 955i Ultra-High Performance Hipot Tester
- High power output
- Wide range of built-in voltage capabilities
- Reliable electrical safety tester
Vitrek V74 AC/DC Hipot, IR and Ground Bond Tester
- Easy to Use 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface Large High Reliability START and STOP switches Large easy to see PASS/FAIL Indicators
- 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface
- Large High Reliability START and STOP switches
Associated Research 510L LineChek Line Leakage Tester
- Input Voltage: 115/230VAC ± 15%, 1Ø
- DUT Power Voltage: 30 - 300VAC, 1Ø
- DUT Power Current: 30AAC (Max Cont.)
Chroma 19073 AC/DC/IR Hipot Tester
- Ground fault interruption shutdown the instrument when imbalance current > 0.5mA, provide the highest protection capability
- TUV approved
- CE Certified
QuadTech Sentry 50 Plus 30 Amp Ground Bond Tester
- Programmable Output Current from 3A to 30A AC
- Programmable Source Voltage from 1.0 to 8.0V rms
- Resistance Measurements from 0.1mW to 510mW
Vitrek V79 4 Wire 30A Ground Bond Tester
- Easy to Use 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface Large High Reliability START and STOP switches Large easy to see PASS/FAIL Indicators
- 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface
- Large High Reliability START and STOP switches
Fluke Biomedical Ansur Test Automation Software
- Allows creating and managing custom test protocols electronically to eliminate dependence on service manuals
- Guides users through stepwise testing process to ensure standardized testing and to minimize training
- Generates test report (PDF or MTR) per requirements with needed level of data to ensure compliance
Associated Research Linechek 620L Fully Automated Line Leakage Tester
Quadtech Guardian 6000 Plus Electrical Safety Analyzer
- Twin Port - Simultaneous Hipot & GB
- Programmable Output Voltage to 5KV AC and 6KV DC
- Ground Bond Testing to 30A AC (to 40A with Optional Transformer)
Associated Research 5030DT Hyamp II 31A Ground Bond Tester
Associated Research 3665 Dielectric Withstand Tester
- Max. Output AC Voltage: 5kV
- Output AC Current: 20mA
- Max. Output DC Voltage: 6kV
Associated Research 3160 Hyamp III Ground Bond Tester
- Input Voltage: 115/230VAC ± 10%
- Frequency: 50/60Hz ± 5%
- Output Rating Current: 1.00 - 60.00A AC
Associated Research 3140 40 Amp Ground Bond Tester
- Patented VERI-CHEK feature prompts users through steps to validate the instrument's operation
- Graphic LCD provides intuitive menu system to simplify the entire testing process from set-up to results
- Patented CAL-ALERT feature alerts the operator that the tester is due for re-calibration
SCI 266 60 Amp AC High Current Ground Bond Tester
- 0 - 150 mΩ for 30.1 - 60.0 A
- 0 - 200 mΩ for 15.1 - 30.0 A
- 0 - 600 mΩ for 3.0 - 15.0 A
Chroma 19572 Ground Bond Tester
- TUV approved
- CE certified
- High current ground continuity testing up to 45Amps
Chroma 19071 AC Hipot Tester
- Ground fault interruption shutdown the instrument when imbalance current > 0.5mA, provide the highest protection capability
- TUV approved
- CE Certified
Chroma 19057 Hipot Analyzer
- 10 kV AC & 20 kV DC withstand voltage test
- 0.1 MΩ - 50 GΩ insulation impedance test
- BDV (BreakDown Voltage test)
Chroma 19055/19055-C Series Hipot Analyzers 500 VA
- 500 VA output rating
- Floating output complies with EN50191
- Corona Discharge Detection (CDD, option)
Chroma 19054 AC/DC/IR/SCAN Hipot Tester
- AC/DC/IR 3 in 1 hipot tester
- AC 5kV and DC 6kV output
- 1kV insulation resistance test
Chroma 19052 AC/DC/IR Hipot Tester
- AC/DC/IR 3 in 1 hipot tester
- AC 5kV and DC 6kV output
- 1kV insulation resistance test