Quadtech Guardian 6000 Plus Electrical Safety Analyzer

Rent Quadtech Guardian 6000 Plus Electrical Safety Analyzer
Enlarge Image
Quadtech 6000 Plus
Request Quote Print Page
Datasheet
The Quadtech Guardian 6000 Plus Electrical Safety Analyzer is the industry’s first safety analyzer with simultaneous Hipot and Ground Bond capability providing a dramatic savings in test time. Five instruments in one, the G6000 Plus provides AC Hipot, DC Hipot, Insulation Resistance, Ground Bond and Open/Short measurements from a single test connection. Versatile and packed with features, the G6000 Plus is a cost effective solution to the full spectrum of electrical safety compliance testing.

Features:


 

  • Twin Port - Simultaneous Hipot & GB
  • Programmable Output Voltage to 5KV AC and 6KV DC
  • Ground Bond Testing to 30A AC (to 40A with Optional Transformer)
  • Insulation Resistance Measurements from 100kΩ to 50GΩ
  • Open/Short Circuit Detection Mode
  • Programmable Ramp, Dwell & Test Times
  • Storage of 100 Test Setups, 50 Steps Each
  • Continuous Leakage Current Monitoring
  • Programmable Trip Current to 40mA AC and 12mA DC
  • Front Panel Lockout via Password
  • Standard RS-232 & Remote I/O Interfaces
  • Optional IEEE-488, Printer Interfaces
  • Optional Built-in 8 Channel Scanner
  • Optional CaptivATE Automation Software for G6000 Plus
     

Specifications:
 

AC Output Voltage: Range: 50V to 5000V AC, 1V resolution
Regulation: <(1% of setting +5V) at Rated Load
Freq: 50-600 Hz, programmable in 1Hz steps
50~60Hz : 1% + 5 cnts, > 60Hz: 3%+10 cnts
Waveform: Sinusoidal
Voltage Display: Accuracy: ±(1% of reading + 5V)
Resolution: 1Volt
AC Current Display: Total current
Range: 0.001 to 40mA AC
Resolution: 1 or 10μA steps
Accuracy: ±(1% of reading + 5cnt)
High/Low Limit Test: 1μA to 40mA AC
Low limit can be turned OFF
Arc Detection: Programmable 1-20mA,
Pulse Width 40μ, 20μ, 10μ or 4μsec
DC Output Voltage: Range: 50V to 6000V DC, 1V resolution
Regulation: <(1% +5V) at Rated Load
Voltage Display: Accuracy: ±(1% of reading + 5V)
Resolution: 1Volt
DC Current Display: Range: 0.1μ to 12mA DC
Resolution: 0.1, 1 or 10μA steps
Accuracy: ±(1% or reading + 5cnt)
High/Low Limit Test: 0.0001mA to 12mA DC
Low limit can be turned OFF
Arc Detection: Programmable 1-10mA
Pulse Width 40μ, 20μ, 10μ or 4μsec