Tektronix MDO4054-6 Mixed Domain Oscilloscope

Tektronix MDO4054-6 Mixed Domain Oscilloscope
Enlarge Image
Tektronix Test Equipment MDO4054-6
Request Quote Print Page
Datasheet
The Tektronix MDO4054-6 Mixed Domain Oscilloscope provides 4 analog channels of 500 MHz bandwidth with a 700 ps rise time. This unit offers a RF channel frequency range from 50 kHz to 6 GHz. Capture time-correlated analog, digital, and RF signals for a complete view of your device systems. See both the time and frequency domain in a single glance, and view the RF spectrum at any point in time to see how it changes over time or with the state of your device. A single capture includes the same spectral content as approximately 1,500 unique test setups and acquisitions on a traditional spectrum analyzer. Solve complicated design issues quickly and efficiently with this oscilloscope integrated into your design. 

MDO4000 Series models distinguish themselves from the competition with the intricacy of their interface. A fast waveform capture rate – greater than 50,000 waveforms per second – enables you to see glitches and other infrequent transients within seconds, revealing the true nature of device faults. A digital phosphor display with intensity grading shows the history of a signal’s activity by intensifying areas of the signal that occur more frequently, providing a visual display of just how often anomalies occur. Traditional oscilloscope FFTS do not display FFT and the desired view of the domain signals of interest simultaneously. Supplying both mixed-domain and spectral analysis, the MDO4054-6 provides 16 digital channels, and its MagniVu™ high-speed acquisition displaying a 60.6 ps fine timing resolution. Correlating events, observing interactions, or measuring timing latencies between the two domains is exceptionally easy, giving you quick insight into your design’s operation.

The Tektronix MDO4054-6 is the fourth model in the Tektronix MDO4000 Series.
 
Tektronix Test Equipment MDO4054-6 Features
  • Mixed-domain analysis
    • Time-correlated analog, digital, and RF signal acquisitions in a single instrument
    • Wave Inspector controls provide easy navigation of time-correlated data from both the time and frequency domains
    • Amplitude, frequency, and phase vs. time waveforms derived from RF input
    • Selectable spectrum time to discover and analyze how RF spectrum changes over time - even on a stopped acquisition
  • Spectral analysis
    • Dedicated front-panel controls for commonly performed tasks
    • Automated peak markers identify frequency and amplitude of spectrum peaks
    • Manual markers enable non-peak measurements
    • Trace types Include: Normal, Average, Max Hold, and Min Hold
    • Detection types include: +Peak, -Peak, Average, and Sample
    • Spectrogram display enables easy observation and insight into slowly changing RF phenomena
    • Automated measurements include: Channel Power, Adjacent Channel Power Ratio (ACPR), and Occupied Bandwidth (OBW)
    • Trigger on RF power level
    • Triggered or Free Run spectral analysis
  • Optional serial triggering and analysis - serial protocol trigger, decode, and search for I2C, SPI, USB, Ethernet, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, and I2S/LJ/RJ/TDM 10.4 in. (264 mm) bright XGA color display Small footprint and lightweight - Only 5.8 in. (147 mm) deep and 11 lb. (5 kg)Wave Inspector® Controls provide easy navigation and automated search of waveform data
Tektronix Test Equipment MDO4054-6 Specs
Analog channels 4
Analog channel bandwidth 500 MHz
Rise time 700 ps
Sample rate (1 ch) 2.5 GS/s
Sample rate (2 ch) 2.5 GS/s
Sample rate (4 ch) 2.5 GS/s
Record length (1 ch) 20M
Record length (2 ch) 20M
Record length (4 ch) 20M
Digital channels 16
RF channels 1
RF channel frequency range 50 kHz - 6 GHz