Dillon EDX-1T Dynamometer Force Gauge
- High capacity models are constructed of powder coated aircraft-quality alloy steel
- Lower capacity models are powder coated aircraft-quality aluminum
- On board storage (accumulation lift and store, push button, and continuous)
Dillon EDXtreme Dynamometer Force Gauge Series
- High capacity models are constructed of powder-coated aircraft-quality alloy steel
- Lower capacity models are powder coated aircraft-quality aluminum
- Onboard storage (accumulation lift and store, push button, and continuous)
Com-Ten EXTRACTOR 1000DW Pull Tester
- Max. capacity: 4,500N
- Accuracy: ±7.5N
- Available units: N, kg, lb
ATS Series 900 Universal Testing Machine
- Up to 10,000 lbf
- 0.02 - 20.00 in/min (0.50 - 500 mm/min)
- 24 in. (610 mm) Crosshead Travel
ATS Series 1100 Universal Testing Machine
- Crosshead Travel | 36 in. (914 mm)
- Speed Range | 0.002 - 20.00 in/min
- Load Cells Available | 10 - 60,000 lbs.
Com-Ten Stentor II 2500 Motorized Force Tester 500 lb
Tinius Olsen ST Series Electromechanical Testing Machines
- Optional tethered, Bluetooth wireless, or virtual interface running on a connected PC controller interfaces.
- Built-in pneumatic supply
- T-slots to keep the testing area open
Qualitest MT-1516 Motorized Force Test System
- Tension & compression testing with a capacity of 550 lb (2.5 kN)
- Crosshead travel at 22 inches (1470 mm)
- Peak force, average force, and stress/strain testing
Qualitest MT-1500 Series Motorized Force Test Systems
- Tension & compression testing to 550 lb (2.5 kN)
- Crosshead travels up to 58 inches (1470 mm)
- Peak force, average force, and stress/strain testing
Lloyd Instruments LD30 Test Machine
- Advanced multi-stage testing
- Automated workflows
- Video and still capture
Tinius Olsen H5KT Benchtop Materials Testing Machine
- PC control via high speed
- RS232 using ASCII mode and super high speed binary mode
- Machines are proof loaded to 200% of capacity
Tinius Olsen H1KS Benchtop Tester
- PC control via high speed
- RS232 using ASCII mode and super high speed binary mode
- Machines are proof loaded to 200% of capacity
Tinius Olsen H10KS Benchtop Tester
- PC control via high speed RS232 using ASCII and super high speed binary modes
- Force accuracy of 0.5% of applied load across the load cell display range
- 32 bit precision motor controller
Mark-10 F505 Digital Force Tester
- Rigid and precise mechanical design
- Intelligent manual control
- Has a force capacity of 500 lbF (2.2 kN)
Mark-10 F1505 EasyMESUR Compression Force Tester
- Rigid and precise by design
- External limit switches
- Easily replaced without special tools or processes
Espec ETTX-WWA Tensile Test Chamber
- Chamber and cart designed to fit tensile test machines and benches by Instron, MTS, and other brands
- Full-opening door with silicone gaskets and hinged on left side
- Slots in top and bottom of chamber for test grips
Dillon EDX-5T Dynamometer Force Gauge
- High capacity models are constructed of powder coated aircraft-quality alloy steel
- Lower capacity models are powder coated aircraft-quality aluminum
- On board storage (accumulation lift and store, push button, and continuous)
Dillon EDX-10T Dynamometer Force Gauge
- High capacity models are constructed of powder coated aircraft-quality alloy steel
- Lower capacity models are powder coated aircraft-quality aluminum
- On board storage (accumulation lift and store, push button, and continuous)
Chatillon CS225 Advanced Force Test System
- 225 lbf (1000N) force capacity
- 7.1 in (180mm) throat depth
- Intuitive 2-in-1 laptop
Chatillon CS2-225 Digital Force Tester
- One-click operation
- Linear guide technology and pre-loaded ball screws
- Advanced software compensation for high displacement measurement precision
Chatillon CS2-1100 Digital Force Tester
- One-click operation
- Linear guide technology and pre-loaded ball screws
- Advanced software compensation for high displacement measurement precision
Chatillon CS1100 Digital Force Tester
- Force measurements made easy - Accurate results, easy programming, maximum throughput and minimal operator training
- One-click operation - Simple and intuitive; with one-click access to favorite tests as well as test results
- Modern design & technology - Linear guide technology, pre-loaded ball screws and advanced software compensation ensures high displacement measurement precision
Benchmark AVEX SM Series Shock Machine Impact Testers
- Keypad Entry of Test Parameters (with 12 character alphanumeric display)
- Shock Testing from 3g to 30,000g
- Test Specimen Weights Up to 1,000 Pounds (453.59 kg)
Tinius Olsen 5ST Electromechanical Testing Machine
- Suitable for tension, compression, flexure, shear, and other tests to a maximum force of 5 kN / 1000 lbf
- Single column design allows compact, economical and easy testing
- Different system interface options are available, from a familiar tethered handheld interface, a wireless Bluetooth interface panel running an Android application, or virtual machine controller
Instron 5544 Tensile Tester
