Fluke CertiFiber Pro 2 Optical Loss Test Set
- Certifies 2 fibers, 2 wavelengths, 3 seconds
- Encircled Flux compliant as required by ANSI/TIA and ISO/IEC
- Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with OptiFiber Pro OTDR
Fluke OptiFiber Pro 2 OTDR
- Multiple wavelengths (850, 1300, 1310, 1490, 1550 and 1625 nm) support LAN, datacenters, PON, FTTx and outside plant applications
- Automated setup senses fiber characteristics and sets measurement parameters
- Manual Expert mode allows simple adjustments to automated settings for detailed testing
Fluke OptiFiber Pro OFP-100-QI OTDR
- Wavelengths: (850, 1300, 1310,1490, 1550, & 1625nm)
- Quad OTDR Module
- SmartLoop™ OTDR Technology
Anritsu MT9085A Series ACCESS Master OTDR
- 8-inch LCD touch screen with easy visibility even in direct sunlight
- LCD touchscreen with a rotary knob and dedicated hard keys
- Familiar functions and operations from previous ACCESS Master series
Fluke CFP-100-Q CertiFiber Pro Optical Loss Test Set
- Encircled Flux Compliant
- Automatic Pass/Fail Analysis
- Built-in Visual Fault Locator (VFL)
Fujikura FSM-70S Single Fiber Fusion Splicer Kit
- Automated and programmable wind protector.
- 14-second automated tube heater.
- Fully robust for shock, dust and moisture.
Fluke OptiFiber Pro HDR OTDR S1625 Kit
- Taptive™ user interface puts advanced data analysis, easy set-up and operation at the fingertips of technicians of all skill levels
- SmartLoop OTDR enables automated testing and analysis of two fibers in a single test, eliminating the need to travel to the far end of the connection to perform tests
- Multiple wavelengths support a variety of applications: 850, 1300, 1310, 1490, 1550, 1625 nm
Sumitomo Quantum Type Q102-CA Fusion Splicer
- 5 second splice time, 9 second heaters.
- Per charge, 300 splice/heater cycles.
- Accessible smart phone interface.
Sumitomo Quantum Type Q101-M12 Mass Fusion Splicer
- RoHS compliant.
- Ruggedized design resistant to shock, water, dust.
- Automatic functions: Arc Calibration, Splice Start, Fiber Identification and Heater Start.
Fluke MultiFiber Pro Optical Power Meter and Fiber Test Kits
- Automatic scanning and testing of all fibers in MPO connectors with “Scan All”
- Support for both Multimode and Singlemode MPO trunks
- Eliminates the need for fan-out cords when testing fiber trunks
Fluke SimpliFiber Pro Optical Power Meter and Fiber Test Kits
- Dual-wavelength testing
- Tests multimode and singlemode fiber
- Measures optical power and loss at 850, 1300, 1310, 1490, 1550, 1625 nm wavelengths
Viavi DWDM OTDR TBERD/MTS-2000 Module
- C-Band (1528nm to 1568nm) tunable DWDM OTDR module at ITU-T G.694.1 wavelengths (CH12 to CH62)
- Integrated CW light source with modulation capability
- Instantaneous traffic detection
TREND Networks FIBERTEK-IV-MM/SM Fiber Cable Certifier
- Attenuation/insertion loss (dB) measurement
- Multimode and single-mode options
- Encircled Flux compliant (optional)
Fujikura 70S+ Fusion Splicer with CT30 Cleaver
- Bluetooth wireless communication.
- Automatic and fully programmable wind protector.
- 13-second tube heater.
Fluke CableIQ Copper and Fiber Technician’s Kit
- Isolate cabling problems from network problems, save time and money by escalating fewer trouble tickets
- Four-second test quickly determines if your existing cabling can support voice/10/100, VoIP or Gigabit Ethernet
- Determine why the existing cabling plant cannot support the desired network speed (e.g. connection fault at 7 feet)
Fluke FTK1450 Complete Verification Kit
- Quickly and efficiently measure power and loss at SC, LC, and ST connections using the dual-wavelength testing feature in which both 850 and 1300 nm or 1310 and 1550 nm wavelengths can be transmitted
- Conveniently save measurements taken at both wavelengths into one record
- Eliminate time-consuming mistakes with the automatic wavelength detection ability
ODM TTK 500 SM/MM Test, Inspection & Cleaning Kit
- USB connectivity and included ODM software package provide simple plug-and-play image-saving for closeout reporting.
- Comprehensive PASS/FAIL analysis compliant with IEC 61300-3-35 industry standard.
- Complete wet/dry cleaning system ensures the cleanest fiber endfaces possible.
EXFO LFD-300B/TG-300B FiberFinder Live Fiber Identifier/Tone Generator
- Pinpoints a specific live fiber using EXFO’s FiberFinder™ functionality
- Induces minimal loss: ≤ 1 dB
- Locates a particular dark fiber using tone recognition (270 Hz, 1 kHz, 2 kHz)
ODM TTK 650 SM Test, Inspection and Cleaning Kit
- VIS 400 inspection scope connects to included 8” Dell tablet via USB
- Automated PASS/FAIL compliance with IEC 61300-3-35 standard
- Optional PA 250 wireless access device transmits test data to devices within 200 feet
Amphenol FSI 525N-30 Multimode Optical Line Tester
- Built-in LED source, simplifies test and measurement
- Non-volatile data storage for more than 1,000 measurements
- Pass/Fail testing mode
Sumitomo Type-39 FastCat Core Alignment Fusion Splicer
- Dual Independent Splice Protection Heaters, Increasing Splicing Efficiency by 70% and Making the Type-39 FastCat, with the Exception of Sumitomo’s Quantum, the Fastest Splicer Available Today
- HDCM (High Resolution Direct Core Monitoring)Technology for Repeatable Low-Loss Splices
- RoHS Compliant
EXFO TK-720C-Oi-VZ-430B Quad OTDR Kit for Verizon Tower Testing
- Connects anywhere: USB, mobile, Wi-Fi, VPN and Bluetooth
- Loaded with utilities: all the tools required to maximize field testing, plus any third-party applications
- Like a PC: Available with dual- or quad-core processor and Windows operating system
AEM TestPro CV100-K61 Copper and Fiber Certification Kit
- 60-pin high-frequency connector
- Rated for 5000 insertion cycles
- CAT 5e/6/6A channel and permanent link certification with detailed printed reports
VIAVI T-BERD 2000 Quad OTDR Kit for Verizon Tower Testing TB2-VWC-FTTA-QU
- Certify the fiber physical layer on FTTx/PON, access, metro and enterprise networks
- Ensure the highest-quality connectorizing, splicing, and turn-up of new fiber links
- Improve workflow with hands-free solution, driving best practices to IEC standards
Viavi T-Berd 8000 Scalable Multitest Platform
- Modular test platform
- High-speed PowerPC processor with 100 GB SATA hard disk
- High-visibility touch-screen display