Vitrek 930i Ground Bond Tester/Ground Integrity Analyzer

Need Help? Call (800) 404-2832ATEC AssuranceWorldwide Delivery
Vitrek 930i Ground Bond Tester/Ground Integrity Analyzer
Enlarge Image
Vitrek 930i Ground Bond Tester/Ground Integrity Analyzer Vitrek 930i Ground Bond Tester/Ground Integrity Analyzer
Vitrek 930i
Request Quote Print Page
930i Datasheet Accessory Kit
3-30A Ground Bond Tester, 50-400Hz, RS232, 4 Wire
Vitrek 930i Features
  • 3 to 30 Amp Test Current - meets a wide variety of regulatory test specifications
  • Password Protected Test Routine Storage
  • Frequency Synthesis 50-400Hz
  • 10mW Measurement Resolution - more measurement confidence and repeatability
  • 4-wire Kelvin Sensing - eliminates lead resistance errors
  • Fully Programmable via front panel, hipot or computer control
  • Hipot and Ground Test from one set-up
  • High Speed Test throughout with actual measurement values
  • Display Prompted Setup - easy to use, fully adjustable
  • CE Mark Certified to EN61010
Vitrek 930i Specs
Electrical Specifications:
Alternating Current Output
Range: 3 to 30 amperes RMS, programmable
Resolution: 1 amp
Output Frequency: Sine wave synthesis, 50 Hz to 400Hz
Compliance Voltage: 3 volts RMS
Regulation: ± 0.25% no load to full load
Resistance Measurement
Resistance Limit: User programmable max. and min. Test is automatically aborted when limit is exceeded.
Resistance Range: 1W at 3 amps linearly decreasing to 100 mW at 30A
Resistance Resolution: 10mW
Measurement Accuracy: ± 1.0% of reading; ± 0.5% of range
Accuracy: Specifications apply for 1 year, ± 5°C from the cal temp within 20°C to 30°C
Calibration: Certificate of calibration traceable to the National Institute of Standards and Technology (NIST) provided
Test Time: Digital count down timer, programmable 1 to 9999 seconds>
Terminal Configuration: True four-wire Kelvin<

General Specifications:
Remote Interface: VICL and serial com standard. PLC optional.
Display: 40 character dot matrix illuminated liquid crystal display
Indicators: L.E.D. status indicators
Alarm: Audible and visual alarms provide pass/fail indication
Diagnostics: Built-in self diagnostics test ROM, RAM and output system
Safety: CE mark certified to EN61010
Accessories: K-2, VIC-3, BBL-2 and operator's manual supplied with unit
Operating Temperature: 0°C to 50°C
Humidity: 90% RH 0°C to 40°C
Power: 115/230 VAC ± 10% 250 VA max
Dimensions: 89mmH x 432mmW x 457mmD (3.5"H x 17"W x 18"D)
Weight: 11Kg (24 lb.) Net/15Kg (34 lb.) Shipping