Fluke 1777 Three-Phase Power Quality Analyzer
- Voltage: 100V – 600V (-15% / +10%)
- Power Consumption: 40VA Max
- Bandwidth: DC to 30 kHz
Fluke 1736 Three-Phase Power Logger
- Voltage range: 100 - 240V (standard)
- Power consumption: 50VA Max
- Frequency: 42.5 to 69Hz
Fluke 1738 Advanced Power Logger
- Voltage range: 100 - 240V (standard)
- Power consumption: 50VA Max
- Bandwidth: 42.5Hz - 3.5kHz
Fluke 435-II Power Quality & Energy Analyzer
- Quickly see how much money losing due to energy waste in terms of real dollars
- Easily see how motor startups are affecting motor drive performance
- Get at-a-glance power quality health data in real-time so you can make better maintenance decisions
Dranetz HDPQ Xplorer Plus Power Quality Analyzer
- High Definition PQ & Energy Monitoring – 1000Vrms, AC/DC, 512 samples/cycle
- High Speed Digitized Transients – 1us, 10 to 2000Vpk
- Transient triggers – V & I – waveshape triggers, high speed. Well beyond PQ standards requirements
Dranetz HDPQ Visa Power Quality & Energy Monitoring Analyzer
- High Definition PQ & Energy Monitoring – 1000Vrms, AC/DC, 512 samples/cycle
- Eight channels, 4 voltage & 4 current
- Advanced PQ – IEC 61000-4-30 Class A & IEEE 1159 compliant
AEMC PowerPad IV Model 8345 Power Quality Analyzer
- Full compliance with IEC 61000-4-30 ed. 3.0 Class A functions
- Real-time display of color waveforms (5 voltage/4 current) from 1 cycle to 10/12 cycles
- Calculation of unbalance (current and voltage)
AEMC PEL 113 Power & Energy Logger
- Voltage: 10 – 1000V AC/DC
- Current: 100mA – 12,000kA AC
- Accuracy: ±0.2% R ± 0.2 V
Fluke 1735 Three-Phase Power Logger
- Record power and associated parameters for up to 45 days
- Monitor maximum power demand over user-defined averaging periods
- Efficiency improvements with energy consumption tests
Fluke 438-II Power Quality Analyzer & Motor Analyzer
- Measure key parameters on direct-on-line motors and motors driven by specific variable frequency drive systems including torque, RPM, mechanical power and motor efficiency
- Perform dynamic motor analysis by plotting of motor de-rating factor against load according to NEMA guidelines
- Calculate mechanical power and efficiency without the need of mechanical sensors, just connect to the input conductors and you’re ready to go
Dranetz DranXperT
- DranXperT Power Logger with 4 Flex Current Probes 16-inch, 1500 A
- PQ disturbance/event detector, power/energy logger, and sensor logger
- 3 voltage channels – direct measurements up to 600 Vrms, CAT III
Dranetz HDPQ Visa Plus
- Frequency | 16 - 25 Hz, 42.5 - 69 Hz, ±0.01 Hz
- Harmonics | IEC 61000-4-6, IEEE 519:2014
- Real power (W) | P: meets 0.2S requirements
Fluke 1775 Three-Phase Power Quality Analyzer
- Automatically measure power and power quality parameters
- At-a-glance power quality health for faster troubleshooting
- Easily view V/A/Hz, power, dips, swells, and harmonics data
Fluke 1730 Three-Phase Electrical Energy Logger
- Key measurements: Voltage, current, power, power factor and associated values enable you to optimize and implement your energy saving strategies.
- Bright, color touch screen: Perform convenient in-the-field analysis and data checks with full graphical display.
- Comprehensive logging: More than 20 separate logging sessions can be stored on the instrument. In fact, all measured values are automatically logged and can be reviewed during logging and before
Dranetz HDPQ Guide SP Power Quality Analyzer
- IP65 enclosure
- GPS
- High Definition PQ & Energy Monitoring – 1000Vrms, AC/DC, 512 samples/cycle
Fluke 1664 FC Installation Multifunction Tester
- Multifunction tester that tests to all local regulations
- Includes "Insulation Pre-test" that detects when appliances are connected to the system and stops the test
- Runs seven installation tests automatically in one sequence with a single connection through Auto Test
Fluke 437-II Three-Phase Power Quality Analyzer
- Energy loss calculator: quantified to pinpoint true system energy losses in dollars
- Power inverter efficiency: simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp
- Capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics
Fluke 430 Series Three-Phase Power Quality Analyzers
Fluke 41B Power Harmonics Analyzer
- Displays voltage, current and power waveforms
- Measures RMS, Peak and Total Harmonic Distortion of voltage and current
- Displays harmonic detail in bar graph format
Fluke 375 True-RMS AC-DC Clamp Meter
- iFlex flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.
- CAT IV 600 V, CAT III 1000 V
- True-rms ac voltage and current for accurate measurements on non-linear signals
Fluke 3540 FC Three-Phase Power Monitor & Condition Monitoring Kit
- Measures: Single, split, or three phase loads Voltage, current, and frequency Active power, non-active power, and power factor Total harmonic distortion
- Single, split, or three phase loads
- Voltage, current, and frequency
Fluke 345 Power Quality Clamp Meter
- AC/DC current: Clamp-on measurement of ac current up to 1400 A rms and dc current up to 2000 A without breaking the circuit
- Highest safety rating: 600 V CAT IV power analyzer is rated for use at the service entrance
- Accurate in noisy environments: Clamp meter performs even with distorted waveforms present on electronic loads with low-pass filter
Hioki 3169-20 Clamp-On Power HiTester
- Measure up to 3-phase, 3-wire system (displays voltage and current for three lines)
- Measure up to four single-phase, 2-wire systems
- 5A to 5000A range
Fluke 1760 Three-Phase Power Quality Recorder Topas
- Fully Class-A compliant
- GPS time synchronization
- Flexible and fully configurable thresholds and scale factors
Fluke 1750 3-Phase Power Quality Recorder
- Power quality that meets the standard: all measurements comply with IEC61000-4-30 standards for correct evaluation
- Threshold-free setup: apply thresholds after data is collected with Fluke Power Analyze Software
- Captures everything through cross-channel and current triggering