Related Products

California Instruments CSW5550 Programmable AC/DC Power Source
- Output: 5.5kVA, 0-156/312V, 3ph
- Frequency Range: 40Hz - 5kHz
- Input Power: 187/264Vrms (3 wire), 342/457Vrms (4 wire), 3ph


TDK Lambda Genesys GEN30-25 Programmable DC Power Supply
- Programmable DC power supply
- Last-setting memory feature
- Built-in RS-232 & RS-485 interface


Kikusui PLZ1002W Electronic Load 1000W 3-110V 200A
- 1000 watt electronic load
- Voltage range 3-110V
- Current range 0-200A


Chroma 63206A-600-420 DC Load | 600 V, 420 A
- 600 V and 6 kW
- High precision and accuracy
- Up to 10 units master/slave parallel control

Magna Power XR600-9.9 Programmable Power Supply
- High power density
- Wide voltage and current range
- High efficiency operation


Keysight E36231A Autoranging Power Supply
- 200W / 30V / 20A
- Output Ripple & Noise: < 350 µVrms
- 4-Wire Remote Sensing

Keysight 6675A 2000 Watt DC Power Supply 120 Volt 18 Amp
- Output Voltage: 0 to 120 V
- Output Current: 0 to 18 A
- Programming Accuracy: Voltage: 120 mV Current: 12 mA

Chroma 62000D Bidirectional DC Power Supply Series
- Two quadrant operation: Power source and regenerative load
- High power density: 18 kW in 3 U
- Easy master/slave parallel & series operation up to 180 kW

Sorensen SG Series DC Power Supply
- High Power Density: up to 15 kW in 3U, 30 kW in a 6U chassis
- Wide Voltage Range: 0-10V up to 0-800V, in increments of 5 kW from 5 to 30 kW
- Fast Load Transient Response: Protection from undesired voltage excursions


Xantrex XFR60-46 DC Power Supply 60 V, 46 A
- Form Factor- Rackmount
- Maximum Current - 46 ADC Max
- Maximum Voltage 60 VDC Max


Keysight N6745B DC Power Module 60V, 1.6A, 100W

Megger TXL 850 Extra Load Unit
- 300A / 16.4kW / 56V
- Internal Resistance: 0.184 Ω, 0.275 Ω, 0.55 Ω
- Operating Temp: 0°C ... +40°C

Chroma 62050E-1200P Auto-Ranging DC Power Supply | 1200 V / 5 kW
- Auto-ranging output model
- Auto sequence programming
- CV/CC modes priority

Megger TORKEL 900 Battery Load Unit
- Batteries can be tested in service
- Dynamic discharge technology – full power at all voltages
- Safety in all details, e.g. detection of blocked airflow

Megger Torkel 840 DC Battery Load Tester
- "In Service" batteries can be tested
- Load currents in the test parameters are included as the unit adjusts
- Adjustable alarm and shutdown points to prevent excessive discharge

TDK Lambda GEN600-2.6 DC Power Supply
- Built-in RS-232/RS-485 interface standard
- Last-setting memory
- Front panel lock selectable from front panel or software


Rohde & Schwarz NGL200 Power Supply Series | 60/120 W, 20 V
- Quiet and stable
- Can be manually operated or via a computer
- DUT protection


Chroma C8000 LED Power Driver Test System
- Output voltage
- Output current
- Ripple Current (RMS & p-p)

Xantrex XDC600-20 Programmable DC Power Supply
- Ten 99-step auto sequences for easy bench-top programming of complex test routines
- Zero voltage "soft" switching for low noise output, improved efficiency and higher reliability
- Active Power Factor Correction (PFC) for lower input current draw and lower current harmonic generation


TDK Lambda GENESYS+60KW Programmable DC Power Supply Series
- Wide range of popular worldwide AC inputs
- Active PFC (0.94 typical)
- Output voltage up to 600 V


Kikusui PLZ153W 150 Watt Electronic Load


Keysight N6743B DC Power Module 20V, 5A, 100W

Sorensen SGA200/50E-0AAA 10KW DC Power Supply
- High Power Density: Up to 15 kW in a 3U / 30 kW in a 6U chassis
- Wide Voltage Range: 0-40V up to 0-600V, in increments of 5 kW from 5 to 30 kW
- Fast Load Transient Response: Protection from undesired voltage excursions


Chroma 63212 Programmable DC Electronic Load
- 150A, 1000V, or 10 kW max.
- CC, CR, CV, CP, Dynamic load modes
- Master/Slave paralleling control mode, allow synchronous load control under static and dynamic loading mode (Up to 93.6kW)

Keysight RP7983A Regenerative DC Power Source | 2000 V, 30 kW
- Regenerative Power System PV Mode: 2000 V, ± 30 A, 30 kW, 400/480 VAC
- Operate in two-quadrant mode as power source and regenerative electronic load
- Maximize throughput with fast output speed and sub-millisecond command-processing time