Narda SignalShark 3310 Real-Time Handheld Spectrum Analyzer
- Frequency range: 8 kHz - 8 GHz
- Scan rate: > 50 GHz
- Real-time instantaneous bandwidth: 40 MHz
Tektronix TTR506 Vector Network Analyzer
- Frequency range: 100 kHz – 6 GHz
- Dynamic range: Up to 122 dB
- 2 ports
Rohde & Schwarz FSH8 Spectrum Analyzer 9 kHz - 8 GHz
- Frequency range from 9 kHz to 20 GHz
- High sensitivity (< –141 dBm (1 Hz), with preamplifier < –161 dBm (1 Hz))
- 20 MHz demodulation bandwidth for analyzing LTE signals
Tektronix RSA306B USB Real-Time Spectrum Analyzer | 9 kHz - 6.2 GHz
- Full-featured spectrum analysis capability with included Tektronix SignalVu-PC™ software
- 17 spectrum and signal analysis measurements standard
- Options for mapping, modulation analysis, WLAN, LTE, and Bluetooth standards support, pulse measurements, playback of recorded files, Signal Survey, and frequency/phase settling
Rohde & Schwarz ZVA8 Vector Network Analyzer
- Linear and nonlinear amplifier and mixer measurements
- Noise figure measurements
- Pulse profile measurements with 12.5 ns resolution
Rohde & Schwarz ZNB8 Vector Network Analyzer
- Dynamic range: ≤ 140 dB
- Sweep time: 4 ms for 401 points
- Temperature stability: typ. 0.01 dB/°C
Keysight Streamline Series USB Vector Network Analyzers
- Get consistent technology, user interface, and automated code capabilities across bench, modular, and USB platforms
- Most compact VNA for easy sharing between test locations
- Wide choice of frequency ranges from 300 kHz up to 26.5 GHz
Narda SignalShark 3330 Real-Time Outdoor Remote Analyzer | 8 kHz - 8 GHz
- IP65-rated robust and weatherproof die-cast aluminum housing
- Stand-alone operation with LTE modem and DC power supply
- Low power consumption
Narda SignalShark 3320 Real-Time Remote Analyzer | 8 kHz to 8 GHz
- Frequency range 8 kHz to 8 GHz
- Extremely fast scan rate of up to 50 GHz/s
- 40 MHz real-time instantaneous bandwidth
Tektronix RSA5106A Real-Time Spectrum Analyzer
- Frequency Range 1 Hz to 6.2 GHz.
- Trigger Modes: Free Run, Triggered, FastFrame.
- Level Range 0 dB to –100 dB from reference level.
RIGOL RSA5065N Real-Time Spectrum Analyzer
- DANL as low as -165 dBm with optional preamp
- Vector network analysis
- Up to 40 MHz of real-time BW
Tektronix RSA3408B Real-Time Spectrum Analyzer, 8 GHz
- DC to 8 GHz measurement frequency range
- 100 Hz to 3 GHz measurement span and 36 MHz vector span
- Real-time analysis for seamless capture of time-varying RF signals
Keysight N9914A FieldFox Handheld RF Analyzer
- 6.5 GHz
- 30kHz CAT/VNA Start Frequency
- 95 dB Dynamic Range
Rohde & Schwarz PR100 Portable Receiver
- Ergonomic and rugged design for portable use
- Detection of unknown signals
- Frequency scan and memory scan
Keysight PNA-X Network Analyzer Series
- Up to 15 markers per trace
- 200 measurement channels and unlimited traces
- Flexible, modern user interface
Keysight PNA-L Network Analyzers Series
- Software tools for investigating, characterizing & troubleshooting designs
- Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
- Configurable test set
Keysight FieldFox N9923A Network Analyzer (Agilent N9923A)
- Built-in QuickCal technology enables calibration without a cal kit
- Best measurement stability over time and temperature
- Industry´s only handheld network analyzer with MIL PRF 28800F Class 2 compliance with no exceptions
Keysight N9912A FieldFox 6 GHz Cable/Antenna Analyzer (Agilent FieldFox N9912A)
- Cable and antenna analyzer for return loss, one-port cable loss, distance to fault, line sweeping, and VSWR measurements
- Handheld network analyzer (S11, S21, phase, and Smith Chart)
- Handheld spectrum analyzer, optional preamplifier
Keysight N9342C Handheld Spectrum Analyzer (HSA), 7 GHz
- AM/FM Tune and Listen
- Analog Demodulation
- Field Strength Measurement
Keysight N9322C Basic Spectrum Analyzer (BSA) | 9 kHz - 7 GHz
- General purpose performance up to 7 GHz with -152 dBm DANL and ±0.6 dB overall amplitude accuracy
- See the real performance of your design with wider (to 1 GHz), deeper views of the most challenging signals
- Measure the spectral purity of your design with industry-leading phase noise and 78 dBc spurious-free dynamic range across 510 MHz bandwidth
Keysight N5249A PNA-X Microwave Network Analyzer
- Simple user interface for full control of pulse modulators, generators, and point-in-pulse measurements
- Point-in-pulse measurements with 20 ns minimum pulse width
- Improved measurement speed and accuracy for narrowband detection via hardware filters and patented spectral-nulling and software IF-gating techniques
Keysight N5239B PNA Microwave Network Analyzer 10 MHz to 8.5 GHz
- PNA Network analyzer software tools for investigating, characterizing & troubleshooting designs
- Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
- Configurable test set
Keysight N1996A-506 CSA Spectrum Analyzer, 100 kHz - 6 GHz
- 1 dB electronic step input attenuator
- 10 Hz to 5 MHz RBW standard, 10% adjustable
- to 200 kHz, 1 Hz to 50 MHz VBW USB and LAN standard
Anritsu ShockLine MS46121B | 150 kHz – 6 GHz
- 1-port VNA with frequency options from 150 kHz to 6 GHz
- External PC control enables control of multiple ShockLine MS46121B devices in parallel for excellent multisite throughput
- Very compact package allows for direct connection to the DUT
Anritsu MS2840A-041 Spectrum Analyzer/Signal Analyzer
- Frequency range of 9 kHz to 6 GHz; 44.5 GHz max. built-in preamp option
- Best close-in phase noise performance in middle range signal analyzer/spectrum analyzer: –138 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency, meas.) –140 dBc/Hz (at
- –138 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency, meas.)