Cannon Load Banks L-48-500 Load Bank 48 VDC, 500 A
- Load Steps: 100 A, 100 A, 100 A, and 100 A fixed steps, 0 - 100 A adjustable step
- Plug test pins for connecting test leads
- Meters: 0 -75 V voltmeter, 0 - 500 A ammeter
Chroma 63630-600-15 DC Electronic Load 600 V, 15 A, 300 W
Adaptive Power Systems 5VP Series High Power Programmable DC Loads
- Up to 60kW per Cabinet
- Low Voltage Range, 0 - 6 Vdc
- Voltages up to 1000Vdc
Chroma 63208 DC Electrical Load 80 V, 60 A, 1560 Watts
Kikusui PLZ1003W 1000W DC Electronic Load
- A multiple number of setting conditions can be stored in memory for instant setting capabilities
- Ammeter, voltmeter and power meter
- Sequence function allows setting conditions to be changed automatically
TDI Power MCL488 3500W Mult-Channel Loads
- Front Panel, Analog IEEE 488, or RS232 Control
- 60 Amp, 350 Watt Modules 30 Amp, 175 Watt Modules
- Channels in 50V, 100V, 400V, or 600V Configurations
Chroma 63201 DC Electronic Load
- Power 260W 2600W
- Current 0-30A 0-300A
- Voltage 1-80V
Eagle Eye SLB-24/48-300/600 DC Load Bank
- Safely monitor live tests remotely with wireless communication to the SLB load bank
- DataView software includes live monitoring, data recording, and report exporting to Microsoft Excel
- Discharge auto-shutdown for time duration, total string voltage, capacity, and individual cell voltage
Chroma C8000 SMPS Auto Test System
- Open architecture software platforms
- Test command optimizer helps to improve test speed
- Capable of testing almost any power supply or related device
Intepro Systems ELR 91000-30 Electronic DC Load with Energy Recovery 1000V, 30A
- Energy recovery of the supplied DC energy into the local or public grid
- Galvanically isolated DC input
- Input power ratings up to 10.5 kW per chassis
Chroma 17011 Programmable Charge/Discharge ATS
- High-accuracy current output & measurement up to 0.02%
- Linear circuit design, low ripple current
- Long term stability suitable for life cycle testing
Chroma 63206A-1200-240 DC Load
- 1200 V / 6 kW
- High precision and accuracy
- Up to 10 units master/slave parallel control
Amrel LPL Series Low-Profile Programmable Electronic Loads
- Broadest Model Selection: 150W, 300W, 600W, 800W Models: 60V, 120V, 400V, 600V, 800V
- Save Rack Space: All LPL Models are 1U high & "Zero" Stackable
- Maximize ROI: In-rack Closed-case Calibration
Chroma 63804 AC/DC Electronic Load | 350 V, 45 A, 4500 W
- Parallel / 3-phase function
- Constant & rectified load modes for AC loading
- Analog voltage & current monitor
Instek PEL-300 Programmable Electronic DC Load
- Simple operation with smart push buttons
- High resolution (20mV, 20mA, 0.33mΩ)
- With high voltage, current and power overload prevention functions
Kikusui PLZ2004WB Booster Unit for PLZ1004W
Adaptive Power Systems 4 Series Programmable Modular DC Electronic Loads
- Max. Power 300W per Module
- Wide Voltage Range, 0 - 500 Vdc
- Max. Current Range 60 Adc
NH Research 4700 Series DC Loads
- 120V, 1kW/200A to 36kW/7200A
- 18 Voltage, Current, Power and Timing Measurements
Kikusui PLZ 5 kW DC Electronic Load System
- Wattage: 0 to 1000 W
- Current: 0 to 200A
- Voltage: 1.5 to 150 Vdc
Chroma 63206 DC Electronic Load 80 V, 600 A, 10.4 kW
- CC, CR, CV, CP load modes
- Master/Slave paralleling control mode, allow synchronous load control under static and dynamic loading mode (Up to 93.6kW)
- Dynamic loading : Up to 20kHz
Chroma 63803 AC/DC Electronic Load
- 1800W
- 50V ~ 350Vrms
- 45 ~ 440Hz
Pacific Power 3210RLS-4W AC/DC Load Simulator | 21 kVA
- Four Quadrant Operation with energy recovery back to the grid
- Standard Models in Power Levels from 6kVA to 21kVA. Parallel units up to 168kVA/kW per cabinet. Dual cabinets up to 252kVA/kW.
- Ultimate Flexibility with 6 configurations: 1, 2 or 3 Phase, dual or triple independent outputs/inputs, single + split outputs/inputs.
Megger Torkel 820 12, 24, 48 Volt DC Battery Load Unit
- External measurement input used to measure current in an external path by means of a clamp-on ammeter or a current shunt.
- Alarm output equipped with a relay contact for triggering an external alarm device.
- Start/Stop input used for starting and stopping discharging from an external device. Galvanically isolated.
Chroma 63210 DC Electronic Load 500 V, 150 A, 14.5 kW
- CC, CR, CV, CP load modes
- Master/Slave paralleling control mode, allow synchronous load control under static and dynamic loading mode (Up to 93.6kW)
- Dynamic loading : Up to 20kHz
Chroma 63105A DC Electronic Load Module 500 V, 10 A, 300 W
- Up to eight channels in one mainframe, for testing multiple output SMPS
- Parallel load modules up to 1200W for high current and power applications
- Synchronization with multiple loads