Measurement Function |
Capacitance (C)
Inductance (L)
Resistance (R)
Reactance (X)
Conductance (G)
Susceptance (B)
Dissipation Factor (D)
Quality Factor (Q)
Impedance (Z)
Admittance (Y)
Phase Angle (Ø) |
Frequency Range |
6505B 20Hz to 5MHz
6510B 20Hz to 10MHz
6515B 20Hz to 15MHz
6520B 20Hz to 20MHz
6530B 20Hz to 30MHz
6550B 20Hz to 50MHz
65120B 20Hz to 120MHz
Frequency step size 0.1 mHz
Accuracy of set frequency ±0.005"% |
AC Drive Level |
10 mV to 1V rms (varies with frequency)
200 µA to 20 mA rms (varies with frequency) |
Measurement Speeds |
4 speeds selectable
Up to 20 measurements per second for test frequencies ≧100 Hz |
Accuracy |
Dissipation factor - ±0.0005 (1+D2)
Quality factor - ±0.05% (Q+1/Q)
Capacitance / Inductance / Impedance - ±0.05%
Accuracy varies with frequency, drive level and measured impedance |
DC Bias Current (Option) |
/D1 0 to +100mA dc bias current and 0 to +40V dc bias voltage
/D2 -40V to +40V dc bias voltage |
Binning (Option) |
10 bins with absolute and percentage limits
25 way d-type interface connector
/B1 (Non-isolated) 0V Bin outputs 0 to 5V(normal) with >10mA current sink capability
/B2 (isolated) 24V input outputs 0 to 24V with >10mA current source capability |
Input Specification |
Power supply - Input voltage 90 V AC to 264 V AC (Autoranging)
Mains frequency 47 to 63 Hz |
Display |
8.4" VGA (640 x 480) color TFT with touch panel |
Measurement Connections |
Four front panel BNC connectors permit two, three or four terminal connections with the screens at ground potential.
1J1011 Component Fixture (supplied as standard) allows connection to leaded components and devices. |
Printer |
HP-PCL compatible graphics printing (local and network)
Centronics / parallel printer port, Epson compatible text/ticket printing (local) |
Remote Trigger |
Rear panel BNC with internal pull-up, operates on logic low or contact closure |
GPIB Interface |
External instrument control 24 pin IEEE 488 connector |
USB Interface |
Two Unversal Serial Bus (USB) interfaces
USB 1.1 compliant |
VGA Interface |
15-way D-type connector to drive an external monitor in addition to the internal screen |
Network Interface |
10/100-BASETX Ethernet controller
RJ45 connector |
Keyboard Interface |
Standard USB or PS/2 keyboard port. Instrument front panel remains active with keyboard plugged in |
Mouse Interface |
Standard USB or PS/2 mouse port
Touch screen remains enabled when the mouse is connected |