Amplifier Research MT06000 Multistar Multi-tone RF Radiated Immunity System 80 MHz

Amplifier Research MT06000 Multistar Multi-tone RF Radiated Immunity System 80 MHz - 6 GHz

The Amplifier Research MT06000 Multistar Multi-tone RF Radiated Immunity System 80 MHz - 6 GHz is a state-of-the-art system designed to test RF Radiated Immunity faster than ever before possible. By testing multiple frequencies (tones) at once, test times can be reduced by a factor equivalent to the number of tones selected. The number of tones is only limited by the signal generator bandwidth (150MHz) and the size of the amplifier used with the system. The MT06000 contains all the instruments needed to perform radiated immunity testing for IEC 61000-4-3 specification except the required amplifiers, antennas and directional couplers. Amplifiers can be sized and selected based on your required field levels and testing needs.

Teseq NSG 4070B Conducted Immunity Test System

Integrated signal generator 9 kHz – 1 GHz
3 power meter inputs 9 kHz – 1 GHz
Integrated class A power amplifier module for different applications: 35 W, 150 kHz – 230 MHz; 40 W, 10 kHz – 400 MHz 45 W, 9 kHz – 1 GHz; 80 W, 150 kHz

AE Techron DSR 100-200 | Pulse 2B and 4

4-Quadrant – Can source and sink current.
±80V – DC supply for 12V to 48V systems; meets 80V surge requirements.
300 kHz Sine – DC ripple tests for all major standards.

EM Test CWS 500N1 Continuous Wave Simulator, 80W

Signal generator 9kHz to 1GHz
Amplitude modulation: 1Hz to 3kHz (0% to 95%)
Pulse modulation: 1Hz - 1kHz (10% to 90%)

Teseq NSG 4060 Low Frequency Immunity Test System

Signal generator and integrated power amplifier 15 Hz to 150 kHz
Meets IEC / EN 61000-4-16 in combination with the Extension Unit
Meets IEC / EN 61000-4-19 and other standards

AE Techron 3110 Standards Waveform Generator

Includes a large library of Automotive and Aviation Standards’ test routines--complete list available as Supplemental Document under Datasheet on left
Drag and drop interface makes it easy to modify existing tests or build new waveform sequences
Loop entire tests or test sections; repeat loops with increments of up to four variables

Tektronix TCPA300 Current Probe Amplifier

DC to 100 MHz maximum bandwidth
Automatic control and onscreen scaling and units
AC/DC input coupling

AE Techron 7228 Linear Power Amplifier

DC – 1 MHz
Gain: 20V
AC Power: 1000W RMS

AE Techron 7234 Audio Power Amplifier

Bench-sized
Single-phase
Drop outs and surges as fast as 1.2µs

Tektronix TCP303

Easy Current Measurements
Probe Connects Directly to TDS Scope through TEKPROBE™ BNC Interface
Split Core Construction for Easy Circuit Connection

EMC Partner IMU C-SHORT Common Mode Short Duration Testing Extension

IEC 61000-4-16 Standard
Testing capabilities that find conducted immunity
Common mode extension

Prâna IP-DR250 Bulk Current Injection Probe

Frequency Range: 10kHz - 400MHz
Power: 500W (CW), Loss: -33... -6dB
Inner Diameter: 1.72in (43.8mm)

PMM EMCL-35 10 kHz - 1 GHz EM Injection Clamp | 35mm Aperture

Frequency Range: 10kHz - 1GHz
Power: 100W, Typ. Coupling Factor: -3dB
Inner Diameter: 1.38in (35mm)

Teseq Mil-Std-461 CS114 10kHz - 400 MHz Conducted Susceptibility Test System

Signal generation: NSG 4070-0
Modulator: included in NSG 4070-0
Power meter: 3x included in NSG 4070-0

Front view of a Teseq NSG 4070C-80 test system, 4th generation.

Teseq NSG 4070C-80 Test System for Conducted and Radiated Immunity

IEC & Automotive standards
80W, 150kHz - 230MHz amplifier
4kHz - 1 GHz signal generator / power meter

AE Techron 8302 RF Amplifier

Part of the 8300 Series
Revolutionary switch-mode design
Wide bandwidth and flexible

Tektronix TCP0020 Current Probe

Easy-to-use design
DC to >50 MHz bandwidth
Core jaw diameter of 5 mm (0.2 in)

Fischer Custom Communications F-120-9A

Frequency: 10kHz - 230MHz
Power: 100W, Loss: <8dB
Inner Diameter: 1.57in (40mm)

PMM Cond-IS/10 Conducted Immunity System

Generator 3010, 9 kHz – 1 GHz, -107 to +10 dBm
Amplifier 6000N, 9 kHz – 230 MHz, 10/15 W
ATT-25W, 6 dB Attenuator, 25 W max

Fischer Custom Communications FCC-BCICF-2

Bulk current injection probe fixture
Matched with the F-140 bulk current injection probe
Easy-to-use design

AE Techron T1000 Magnetic-Field Susceptibility Transformer

Up to 100ARMS secondary current.
Exceeds AF Magnetic Field test requirements of DO 160 Section 19 and Boeing D6-16050-5 Section 7.2.2.
Circuit breaker protected from over-current.

Com-Power CLCE-1032 RF Current Probe | 9 kHz – 1000 MHz

Frequency range of 9 kHz to 1000 MHz
Suitable for CISPR, MIL-STD-461, and DO-160
Individual calibration

AE Techron T3700 Electric-Field Susceptibility Transformer

Up to 3,700 volts, 11,000 V/m.
Meets or exceeds voltage requirements of DO 160 Section 19 and Boeing D6-16050-5 Section 7.2.
Robust design; withstand tested to 5,000VRMS.

LeCroy CP150 Current Probe

Current probe
Compact design
Broad bandwidth

AE Techron T2000 Low-Frequency Conducted Susceptibility Transformer

Frequency response: 10 Hz to 250 kHz.
Turns ratio: 2:1 step down
Audio power: 200W

Solar 9719-1N Injection Probe

Frequency Range: 10kHz - 350MHz
Power: 200W
Inner Diameter: 1.5in (38mm)