Amprobe UAT-620 Underground Utilities Locator Kit

The Amprobe UAT-620 Underground Utilities Locator Kit is designed to accurately pinpoint underground utilities and buried services. Designed for electricians with a CAT IV 600 V rating, Amprobe UAT-620 locating kits come complete and ready for use with a transmitter, receiver, test lead kit, batteries and additional fuses, all in a mobile, protective duffle bag.

The Amprobe UAT-620 kit also includes a signal clamp for transmitting a signal when it is not possible to make electrical contact with the cable to be traced. For applications where ground fault locating is required, use the UAT-600 Transmitter in combination with the optional A-Frame accessory.

Product Info Related Products

Multiple tracing modes allow you to locate and trace energized and de-energized utilities in a variety of applications.
The intuitive Transmitter automatically chooses the correct locating function based on the connected accessory and includes selectable 8/33 kHz frequencies.
The Receiver’s high-contrast display allows for clear viewing in full sunlight and features an automatic backlight for shaded and dark areas.
Semi-automatic gain control quickly detects tracing signal and allows precise adjustment of the receiver sensitivity.
Depth measurement up to 20 ft.
Rated CAT IV 600 V, ensuring safety when working with energized cables.

SKU: AMPR-UAT-620

Dynatel 2273M Cable/Fault Locator

Locate cable and pipe path
Measure cable/pipe, or Sonde depth with the push of a button
Display relative signal current in the cable or pipe

Dynatel 573A Earth Fault/Cable Fault Locator

3M Dynatel 2573 Cable / Pipe / Fault Locator

Trace view mapping display mode
6 active frequencies for direct connect
4 induction frequencies with maximum allowed output power

Amprobe UAT-600-T Underground Utilities Locator Transmitter

0 V to 600 V, 50 Hz to 60 Hz
Resolution: 1 V
Accuracy:: ±10%

Amprobe UAT-600-R

Power: 2 mA
Radio: 20 μA
8 kHz: 5 μA

3M Dynatel 2273 Pipe / Cable / Fault Locator

Four operator-selectable frequencies
Simultaneous signals
Fault-locate/cable-locate signals applied simultaneously

Radiodetection RD8000PDL Multifunction Precision Locator

Light weight – at only 1.9 kg, the RD8000 range is comfortable to use for extended periods
IP54 Rating – you can operate it in almost any environment
Transmitter and locator feature a large, high contrast backlit LCD screen.

Radiodetection RD5100 Underground Cable Locator Series

Guidance Mode – the Target Position Indicator, proportional arrows, and audio signals guide you towards the target pipe or cable. The orientation and the signal strength given out by the target
Compass – a visual indication of the target pipe or cable’s orientation, simplifying the task of following the correct target line.
TruDepth – depth readings are given only when the RD5100 is correctly oriented above the target. RD5100 locators are available in Imperial and Metric versions.

3M Dynatel 2250 Advanced Cable Locator

Four active frequencies
Graphic display to distinguish between targeted cable and other cables in congested area
Passive frequencies for power, cathodic protection systems and CATV

3M Dynatel 2573-iD Cable/Pipe/Fault and Marker Locator

Trace view mapping display mode
6 active frequencies for direct connect
4 induction frequencies with maximum allowed output power

Dynatel 505 Portable Cable and Conductor Identifier

Dynatel 1420-iD Electronic Marker System Locator

Large backlit, high-resolution graphic display
Locator PC tools software
PC interface via standard RS232/USB

Radiodetection RD8100 Underground Cable Locator

Detect all commonly used RF utility markers with automatic depth estimation
RD Map cell-phone app for the real-time creation of detailed buried utility maps
Combined mode to scan simultaneously for cables, pipes and RF markers

Dynatel 2250M Cable/Fault Locater System

A easy-to-use system that requires very little operator training
Trace a pipe or cable and locate markers along the way
M-iD versions locate and read/write to all EMS-RFiD markers

Amprobe AT 5005 Underground Cable / Pipe Locator System

Locates underground energized and de-energized wires, cables and pipes, eliminates exploratory digging in parking lots or under floors for buried pipes and wires
Signal Select and Distortion Alert icon indicates clean signal of the traced line, versus "ghost" and "return" path signals coming from the neighboring lines
Three testing modes for best accuracy: Passive Power Mode (50, 60, 100 and 120 Hz) – tracing energized lines conducting current Passive Radio Mode (RF) – using surrounding radio

Schonstedt XT-512 Underground Pipe and Cable Locator

Operates on 512 Hz Frequency mode
Passive detection of 50 Hz or 60 Hz, and sonde
One button depth measurement

Radiodetection RD7200 Cable & Pipe Locator

Speed, accuracy, and reliable performance
Easy to setup and use
High performance audio system and vibration alerts for noisy environments

Amprobe AT-3500 Underground Cable Locator

Locates underground energized and de-energized wires, cables, and pipes
Three testing modes for best accuracy Passive power (50/60 Hz) Passive radio (RF) Active T-3500 signal generator with induction mode directly connected to the cable with test leads or
Passive power (50/60 Hz)

Dynatel 573 Sheath Fault/Cable Locator

Dynatel 573DL Cable Fault Locator

Amprobe UAT-610 Underground Utilities Locator Kit

Multiple tracing modes allow you to locate and trace energized and de-energized utilities in a variety of applications.
The intuitive Transmitter automatically chooses the correct locating function based on the connected accessory and includes selectable 8/33 kHz frequencies.
The Receiver’s high-contrast display allows for clear viewing in full sunlight and features an automatic backlight for shaded and dark areas.