VIAVI T-BERD/MTS 5800-100G Ethernet Network Tester
- Supports comprehensive rate testing ranging from DSx PDH (1.5M/2M) through to 112G OTU4.
- Saves time with the industry’s fastest RFC 2544 and Y.1564 SAMComplete™ Ethernet service activation test including nanosecond accurate latency measurements and supports RFC 6349
- Ensures QSFP+/QSFP28 and CFP4 modules run error-free with the field optimized Optics Self-Test.
Rohde & Schwarz CBT Bluetooth Tester
- Qualified by the Bluetooth SIG for RF measurements
- Highly flexible troubleshooting in R&D
- Very short measurement times for high throughput in production
Tektronix BSX125 Bit Error Rate Tester (BERT)
- Provides a single solution for receiver stress testing, debugging, and compliance.
- Test Gen-3 and Gen-4 standards including PCIe, SAS, and USB 3.1 and proprietary standards.
- DUT handshaking capability above 16 Gb/s supporting RX test requirements for loopback initiation and adaptive link training for key standards such as PCIe.
Viavi ONT-506 Optical Network Tester
- Portable 40/43G (SDH/SONET/OTN) and jitter/wander test solution
- Combination of multiple technologies and multiple ports for fast and flexible testing
- Selection of plug-in instrument modules for SDH/SONET, PDH/DSn, OTN, EoS, Jitter, and Ethernet testing
Tektronix CR125A Clock Recovery Instrument
- Instrumentation quality clock recovery.
- Accurate, variable loop bandwidth from 100 kHz to 12 MHz, with optional 24 MHz for the jitter transfer function (JTF) bandwidths of USB.
- 3.0, SATA 6G, and PCIe Gen-3.
Keysight 81130A Pulse Data Generator
- 400/660 MHz single- or dual-channel pulse data generator
- 400 MHz, 3.8 V, 50 Ω into 50 Ω (81131A) or 660 MHz, 2.5 V, 50 Ω into 50 Ω (81132A)
- Pulse, burst, and pattern modes selectable
Tektronix CR286A Clock Recovery Instrument
- Instrumentation quality clock recovery.
- Accurate, variable loop bandwidth from 100 kHz to 12 MHz, with optional 24 MHz for the jitter transfer function (JTF) bandwidths of USB.
- 3.0, SATA 6G, and PCIe Gen-3.
EXFO FTB-400 Universal Test System for Fiber Optic Networks
- Measures throughput, back-to-back (burstability), latency and frame loss as per RFC 2544
- EtherBERT™* for bit-error-rate testing of 10 Gigabit Ethernet circuits
- Performs packet jitter measurement (IP packet-delay variation as per RFC 3393) to qualify Ethernet transport networks for transmission of delay-sensitive traffic such as voice-over-IP (VoIP)
Tektronix BSX320 Bit Error Rate Tester (BERT)
- Provides a single solution for receiver stress testing, debugging, and compliance.
- Test Gen-3 and Gen-4 standards including PCIe, SAS, and USB 3.1 and proprietary standards.
- DUT handshaking capability above 16 Gb/s supporting RX test requirements for loopback initiation and adaptive link training for key standards such as PCIe.
Keysight N4960A Serial BERT 17 and 32 Gb/s
- Full data rate pattern generation and error detection
- Integrated clock source with calibrated stress capability
- Built-in selection of PRBS and common telecom/datacom test patterns
Keysight M8040A Bit Error Rate Tester
- Data rates from 2 to 32 and 64 Gbaud
- PAM-4 and NRZ selectable from user interface
- Built-in 4 tap de-emphasis to compensate loss
Viavi T-BERD 6000a v2 BERT/MSAM
Tektronix CR175A Clock Recovery Instrument
- Instrumentation quality clock recovery.
- Accurate, variable loop bandwidth from 100 kHz to 12 MHz, with optional 24 MHz for the jitter transfer function (JTF) bandwidths of USB.
- 3.0, SATA 6G, and PCIe Gen-3.
Tescom 635 QuickBERT-T1 Bit Error Rate Test
- Transmits all standard T1 BERT patterns and loop codes
- Transmits HDSL loop codes
- Has the ability to insert logic, BPV, and frame bit errors
Tektronix BSA Series BERTScope Bit Error Rate Tester
- Integrated, calibrated stress generation to address the stressed receiver sensitivity and clock recovery jitter tolerance test requirements for a wide range of standards Sinusoidal jitter to
- Sinusoidal jitter to 100 MHz
- Random jitter
Anritsu MT1000A Network Master Pro | Ethernet / CPRI / OTDR
- Supported for 100G/25G Ethernet
- Supported for 100G/40G OTN
- Condensing the communication network opening maintenance technologies into one module: Ethernet, eCPIR/RoE/CPRI/OBSAI, OTN, Fibre Channel, SDH/SONET, PDH/DSn
Tektronix BSX240 Bit Error Rate Tester (BERT)
- Provides a single solution for receiver stress testing, debugging, and compliance.
- Test Gen-3 and Gen-4 standards including PCIe, SAS, and USB 3.1 and proprietary standards.
- DUT handshaking capability above 16 Gb/s supporting RX test requirements for loopback initiation and adaptive link training for key standards such as PCIe.
EXFO FTB-4 Pro Platform BERT/SONET/SDH
- Connects anywhere: USB, WiFi, Bluetooth, mobile and virtual private network (VPN)
- Loaded with utilities: equipped with all the tools required to maximize field testing
- Like a PC: quad-core processor with Windows 10 operating system
Keysight J-BERT M8020A Bit Error Rate Tester (BERT)
- Data rates up to 8.5 and 16 Gb/s expandable to 32 Gb/s
- 1 to 4 BERT channels in a 5-slot AXIe chassis
- Integrated and calibrated jitter injection: RJ, PJ1, PJ2, SJ, BUJ, sinusoidal level interference
Keysight N4962A Serial BERT
- Internal and external clock system
- 0.5 to 12.5 Gb/s operation
- Multiple clock and pattern triggers
Keysight J-BERT N4903B High-Performance Serial BERT
- Excellent precision and sensitivity for accurate measurements
- Choice of feature set and frequency classes to tailor to test needs and budget
- State-of-the-art user interfaces with color touch screen
Keysight M8030A Multi-Channel BERT
- Data rates up to 8.5 Gb/s and 16 Gb/s
- Up to 10 BERT pattern generator and analyzer channels in a 14-slot AXIe chassis
- Integrated and calibrated jitter injection: RJ, PJ1, PJ2, SJ, BUJ, sinusoidal level interference
EXFO FTBx-88460 Bit Error Rate Tester
- 400G Ethernet testing capabilities based on the IEEE 802.3bs standard
- State-of-the-art Open Transceiver System (OTS) design for full flexibility with current and future transceivers
- Flex Ethernet (FlexE) testing capabilities with low and high-speed Ethernet clients supported on 4xQSFP28 ports
Tektronix Clock Recovery (CR) BERTScope Series
- Instrumentation quality clock recovery.
- Accurate, variable loop bandwidth from 100 kHz to 12 MHz, with optional 24 MHz for the jitter transfer function (JTF) bandwidths of USB.
- 3.0, SATA 6G, and PCIe Gen-3.
Tektronix BSX-BERTScope Series Bit Error Rate Testers (BERT)
- Provides a single solution for receiver stress testing, debugging, and compliance.
- Test Gen-3 and Gen-4 standards including PCIe, SAS, and USB 3.1 and proprietary standards.
- DUT handshaking capability above 16 Gb/s supporting RX test requirements for loopback initiation and adaptive link training for key standards such as PCIe.