EM Test 3-Phase Netwave Series AC/DC Power Supply
- Wide Power Bandwidth; DC - 5kHz
- Output Power up to 60,000VA AC / 72,000W DC
- Output Voltage up to 3*360V AC (p-n), +/-500V DC
Newtons4th IMP753 Impedance Network
Newtons4th PPA5531 Flicker and Harmonics Analyzer
- Fully Compliant Harmonics and Flicker Test Solutions
- Leading wideband accuracy Basic 0.01% with class leading high frequency performance
- ISO17025 accredited ISO17025 IEC61000 certification available
Advanced Analyzers HFA-3-36-REF Harmonics and Flicker Analyzer | 3 ph, 36 A
- Up to Harmonic 40
- Can be optionally selected to show 2 - 9 kHz
- 0 - 350 V-rms ±500 Volt peak std
Advanced Analyzers AA-HFA-3-75-Z-REF-Z-TEST | 3 ph, 75 A
- 0 - 36 A-rms
- 0 - 100 A-pk for 10 seconds
- 1 - 15000 VA
California Instruments CSW5550 Programmable AC/DC Power Source
- Output: 5.5kVA, 0-156/312V, 3ph
- Frequency Range: 40Hz - 5kHz
- Input Power: 187/264Vrms (3 wire), 342/457Vrms (4 wire), 3ph
Teseq Profline 2105 | 1 ph, 5 KVA
- 5 kVA output power
- Immunity test system that is simple to upgrade, pc-based
- Accessible control interface
Teseq NSG 1007-5 Single Phase AC and DC Power Source
- 5 kVA AC Source L-L three phase input
- Single phase output
- Arbitrary waveform generation
CNS Poway HFA-16/75 1 Phase Harmonics & Flicker Analyzer
- ISO-17025 accredited device
- 16 bit USB based data acquisition
- PLL based sampling method
Pacific Power 320ASX Single / Three Phase AC Power Supply | 2000 VA
- 22 Waveform Library – Arbitrary Waveform Generator
- 15 to 1,200 Hz Operation – 5,000 Hz Bandwidth
- Precision Voltage Programming – 0.05% with CSC engaged
California Instruments MX45 AC Power Source
- Output: 45kVA, 0-150/300V, 3ph
- Frequency Range: 40 - 1000Hz
- Input Power: 208/480 ±10%VAC, 3ph
EM Test DPA 503N Power Analyzer per IEC 61000-3-3, IEC 61000-3-11 and IEC 60725
- Real-time data acquisition
- Internal hard disk for data storage
- 16-Bit A/D converter
Teseq NSG 1007 AC & DC Power Sources
- Combination AC and DC power source and power analyzer
- Arbitrary waveform generation
- Built-in digital power analyzer
EM Test Harmonics & Flicker Test System for IEC/EN 61000-3-2/3-3
- Real-time data acquisition
- Internal hard disk for data storage
- 16-Bit A/D converter
Teseq Profline 2103 3 kVA Harmonics & Flicker Measuring System
- Low cost system for small DUTs
- Complete test system including clean power source
- Simulated flicker impedance, no need for expensive physical impedance
Kikusui KHA1000 16A/1PH Harmonics/Flicker Analyzer for IEC 61000-3-2 & 3-3
- No need for a PC for compliance testing
- Customization of test conditions
- Easy-to-view screen and real-time measurement
Yokogawa WT3000 Precision Power Analyzer
- Basic accuracy: 0.01% of reading
- Basic power accuracy: 0.02% of reading
- 30A current input element
California Instruments MX Compliance Test System Series
- Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high speed data transfers, unlike competing
- PC based Harmonic and Flicker test software provides real-time full color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
California Instruments 5001iX AC Power Source
- Output: 5kVA, 0-150/300V, 1ph
- Frequency Range: 16 - 1000 GHz
- Input Power: 208/240VAC, 1ph
EM Test ACS 500N2.3 Single Phase AC/DC Voltage Source, 2 kVA
- Voltage range: 0V to 330V AC/DC
- Voltage resolution: 0.025% (12 bit)
- Output frequency: DC, 10Hz to 80Hz
EM Test DPA 500N Single Phase Power Analyzer with Harmonics & Flicker
- Real-time data acquisition
- Internal hard disk for data storage
- 16-Bit A/D converter
California Instruments 2300CL Harmonics and Flicker Calibrator
- 2300W
- 100-240VAC
- 178 mm (7 inch) high-rack chassis
Yokogawa WT5000 Precision Power Analyzer
- Basic power accuracy of ±0.03%
- 10 MS/s, 1MHz power bandwidth
- Peak voltage of 2.5 kV or RMS of 1.5kV
Teseq 2145 45kVA 3-Phase Flicker and Harmonics Measuring System
- AC fast switching unit for standards specified in the IEC 61000-4-11
- Unit has two inputs, AC source and AC Mains
- Allows for single or three phase mode testing
California Instruments PACS-1 Harmonics/Flicker Test System
- AC Line Distortion Compensation - PCTS Software compensates for AC Line distortion.
- PC Based Operation - Simple to use Windows GUI automates and documents test procedures and easily accommodates future IEC standard changes.
- Upgradable to Full Compliance Level - PCTS can be field upgraded to full compliance by adding a California Instruments AC Power Source.