Tektronix TCP0020 Current Probe
- Easy-to-use design
- DC to >50 MHz bandwidth
- Core jaw diameter of 5 mm (0.2 in)
AH Systems ICP-622 Injection Current Probe | 1 MHz – 500 MHz
- Broad frequency range of 1 MHz to 500 MHz
- Individually calibrated
- Split type clamp-on design
Com-Power CDN-M325 Coupling/Decoupling Network (CDN)
- Frequency Range - 150 kHz - 80 MHz
- Meets EN 61000-4-6 requirements
- Current Rating - up to 25 Amps
Solar 9144-1N Injection Probe
- Injection probe
- Unique split toroidal structure
- Designed to maintain a low voltage standing wave ratio
Amplifier Research MT06000 Multistar Multi-tone RF Radiated Immunity System 80 MHz - 6 GHz
Fischer Custom Communications F-72 Current Probe | 100Hz - 100MHz
Com-Power CLCE-332 RF Current Probe | 9 kHz – 300 MHz
- Frequency range of 9 kHz to 300 MHz
- Suitable for CISPR, MIL-STD-461, and DO-160
- Individual calibration
PMM Cond-IS/10 Conducted Immunity System
- Generator 3010, 9 kHz – 1 GHz, -107 to +10 dBm
- Amplifier 6000N, 9 kHz – 230 MHz, 10/15 W
- ATT-25W, 6 dB Attenuator, 25 W max
AH Systems BCP-511 Broadband Current Probe | 20 kHz – 100 MHz
- Measure conducted emissions from 20 kHz to 100 MHz
- Capable of measuring pulse currents up to 100 amperes with a duty cycle of 0.001
- Individually calibrated (transfer impedance calibration included)
EM Test CWS 500N2 Continuous Wave Simulator
- Supports BCI testing as per various standard requirements
- Basic frequency range 9kHz up to 400MHz
- Extendable frequency range up to 1GHz
EMC Partner IMU C-SHORT Common Mode Short Duration Testing Extension
- IEC 61000-4-16 Standard
- Testing capabilities that find conducted immunity
- Common mode extension
PMM CDN-AF2 Coupling Decoupling Network
- 150 kHz - 230 MHz
- 4 mm Safety Lab Connectors
- 250 V AC / 250 V DC
Com-Power CDN-S4 4 Wire Coupling/Decoupling Networks (CDN)
- For Signal Lines
- Frequency Range - 150 kHz - 80 MHz
- Meets EN 61000-4-6 requirements
Solar 9123-1 Current Monitor Probe | 10 kHz – 500 MHz
- Bulk current injection probe for EMI testing
- Clamp-on design
- Frequency range of 10 kHz to 500 MHz
Frankonia MTS-800 Magnetic-Field Low-Frequency Emission and Immunity Test System
- Frequency range for emission and immunity measurements: DC – 250 kHz
- 800W precision power amplifier, signal generator and spectrum analyzer in one compact unit
- All instruments may as well be used as stand-alone devices
Com-Power CDN-AF4 Coupling/Decoupling Network (CDN)
- For Signal Lines
- Frequency Range - 150 kHz - 80 MHz
- Meets EN 61000-4-6 requirements
Teseq (Schaffner) KEMA 801A Decoupling Clamp
- Decoupling Network/ RF attenuation clamp
- As specified in IEC/EN 61000-4-6
- Very efficient coupling
PMM RAD-IS/3G-602 Radiated Immunity System
Fischer Custom Communications F-120-9A
- 7 dB attenuation between 100 kHz and 230 MHz when measured into a 50 ohms fixture
- Perform IEC 1000-4-6 testing with 20 watts or less of RF power
- Usable up to 200 watts
EM Test CDN-M2/M3N for Supply Lines
- For 2 or 3 AC/DC supply lines (switchable)
- AE: IEC 320 connector
- EUT: 4mm safety lab connectors
Teseq NSG 4070-75 Conducted & Radiated Immunity Test System
- Integrated signal generator 9kHz to 1GHz
- 4-channel power meter 9kHz to 1GHzAn advanced combination of signal generator and compact immunity test system.
- Integrated power amplifier module for different
Solar 9142-1N Bulk Current Injection Probe | 2 MHz – 450 MHz
- Bulk current injection probe
- Frequency range of 2 MHz to 450 MHz
- Maximum input power of 200 W
Pearson Electronics 110 Current Monitor Probe | 1Hz – 20MHz
- Current monitor probe
- Robust peak current capacity of 5 kA
- Frequency response reaching up to 20 MHz
AH Systems ICP-621 Injection Current Probe | 10 kHz – 100 MHz
- Broad frequency range of 10 kHz to 100 MHz
- Individually calibrated
- Split type clamp-on design
Fischer Custom Communications F-33-2 Current Probe | 1kHz - 250MHz
- Compact probes with an external diameter of roughly 71 mm and an internal diameter of 32 mm
- Frequency spectrum from 1 kHz to 250 MHz
- BNC connector