Amplifier Research 3500A100 | 3500W, 10 kHz - 100 MHz

The Amplifier Research 3500A100 Solid-State Amplifier is a self-contained unit with a rated output power of 3500 W and a frequency response of 10 kHz to 100 MHz. This amplifier has a minimum gain of 66 dB at the maximum setting and a minimum gain adjustment of 20 dB. With forced-air cooling, a user-friendly display, and more, the 3500A100 is the ideal model for a variety of testing requirements.

Product Info Related Products

Rated Output Power	3500 W
Frequency Response	10 kHz - 100 MHz
Power Output @ 3 dB Compression	2700 W minimum
Power Output @ 1 dB Compression	2000 W minimum
Gain (at maximum setting)	66 dB
Gain Adjustment	20 dB minimum
Input Impedance	50Ω, VSWR 1.5:1 maximum
Output Impedance	50Ω, VSWR 2.5:1 maximum
Harmonic Distortion	-20 dBc maximum
Connector Types	RF Input: Type N female on rear panel RF Output: Type 7/16 female on rear pane
Dimensions (W x H x D)	22.1 in x 60.0 in x 39.4 in
Weight	900 lbs

Digital Control Panel (DCP) which provides both local and remote control
Internal/External automatic level control
Pulse input capability
RF output level protection
Internal RF detector

RF susceptibility testing
Antenna and component testing
Watt meter calibration
Particle accelerators
Plasma generation
Communications
Use as a driver for higher power amplifiers

SKU: AMPL-3500A100

Advanced Amplifiers AA-618G-300 Solid State Amplifier

6.0 - 18.0 GHz
300 W
55 dB min

Advanced Amplifiers AA-700M6G-300 Solid State Amplifier

0.7 - 6.0 GHz
300 W
53 dB min

Advanced Amplifiers AA-28G-400 Solid State CW/Pulse Amplifier

2.0 - 8.0 GHz
400 W
56 dB min

Amplifier Research 750S1G6 | 750 W (1 - 4.2 GHz), 500 W (4.2 - 6 GHz)

100% mismatch tolerant
Built-in fault monitoring and protection
Remote control: Ethernet, USB, GPIB, fiber-optic serial, RS-232

Advanced Amplifiers AA-12G-1000 Solid State Amplifier

1.0 - 2.5 GHz
1000 W
60 dB min

IFI S21-2000 Solid State Power Amplifier, 2kW

2000W
0.8 - 2GHz
Solid state design

IFI S31-500 Solid State RF Power Amplifier 800 MHz - 3 GHz, 500 Watts

VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
Alternate Prime Power (specify at time of order)
GPIB IEEE 488 and RS232 Remote Control

Advanced Amplifiers AA-13G-500/1KWP Solid State RF Amplifier

Frequency Range: 0.8 - 3.2GHz
Output: 1kW, 60dBm
Duty Cycle: 10%, Pulse Width: up to 560μs

Advanced Amplifiers AA-2640G-40 Solid State Amplifier

26.5 - 40.0 GHz
40 W
46 dB min

Advanced Amplifiers AA-28G-500-GT TWT Pulse Amplifier

2.0 - 8.0 GHz
500 W
56 dB min

IFI S31-500-900P | Dual Mode CW/Pulse Amplifier

Frequency Range: 0.8 - 3.1GHz
Output: 900W, 60dBm
Duty Cycle: 10%, Pulse Width: 0.1 - 100μs

Advanced Amplifiers AA-118G-50 Solid-State High Power Amplifier

1.0 - 18.0 GHz
50 W
47 dB min

Advanced Amplifiers AA-12G-2KWP Solid State Pulse Amplifier

1.0 - 2.0 GHz
2000 W
63 dB min

IFI T2618-40 Millimeter TWT Amplifier, 18 GHz - 26.5 GHz, 40 Watts

VSWR power protection allows the unit to operate without oscillation or damage
Records beam/filament elapsed time in hours
Features RF safetylock

IFI T825-500 TWT Amplifier, 2.5 - 8GHz, 500W

Instantaneous Broadband Frequency range
Modular Design Construction
Rugged Construction & High Reliability

Advanced Amplifiers AA-618G-40 Solid State Amplifier

6.0 - 18.0 GHz
40 W
46 dB min

IFI S61-100 Solid State Microwave Amplifier 1 GHz - 6 GHz

Solid State Design
Gain Control
Module & System Temp-Monitoring

IFI ST81-50 Solid State/TWT (CW) Amplifier 1.0 GHz - 8.0 GHz, 50 Watt

VSWR Protection against an output mismatch
Alternate Prime Power
GPIB IEEE 488 Remote Control

IFI T251-500A TWT Amplifier | 0.8 GHz – 2.5 GHz, 500 W

Digital display monitors: collector current, collector voltage, helix current, helix voltage, forward rf power, reflected rf power, filament hours, beam hours
Status indicators: power on, standby, RF on/operate
Faults: helix overcurrent, VSWR overload, thermal overloads, air flow, collector overcurrent

Amplifier Research 250S1G6

700 MHz- 6 GHz
250 W
54 dB

Advanced Amplifiers AA-13G-500 Solid State Amplifier

1.0 - 3.0 GHz
500 W
57 dB min

Empower 2223 Solid State Broadband Power Amplifier | 500 MHz to 6 GHz, 150 W

Solid-state Class AB, compact modular design
Suitable for CW, AM, FM, Pulse and some linear applications (consult factory for other modulation types)
Embedded directional coupler – eliminates the need for external component

Amplifier Research 120S1G3M1 Amplifier, 800 MHz - 3 GHz, 120 Watts

800 MHz - 3 GHz
120 W
CW Amplifier

IFI T82-500 TWT Amplifier, 2 - 8GHz, 500W

Solid state power supply
Instantaneous broadband frequency range
Modular design, rugged construction, force air cooling

IFI T42-200 TWT Amplifier 2 GHz - 4 GHz, 200 Watt

Digital Display Monitors: Collector Current, Collector Voltage, Helix Current, Helix Voltage, Forward RF Power, Reflected RF Power, Filament Hours, Beam Hours
Status Indicators: Power On, Standby, RF On/Operate
Faults: Helix Overcurrent, VSWR Overload, Thermal Overloads, Air Flow, Collector Overcurrent