Fluke OptiFiber Pro 2 OTDR
- Multiple wavelengths (850, 1300, 1310, 1490, 1550 and 1625 nm) support LAN, datacenters, PON, FTTx and outside plant applications
- Automated setup senses fiber characteristics and sets measurement parameters
- Manual Expert mode allows simple adjustments to automated settings for detailed testing
Fluke CFP-100-Q CertiFiber Pro Optical Loss Test Set
- Optical loss test set with fastest time to certify – two fibers at two wavelengths in under three seconds.
- Encircled Flux compliant as required by ANSI/TIA and ISO/IEC.
- Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with OptiFiber Pro OTDR.
Fluke CertiFiber Pro 2 Optical Loss Test Set
- Certifies 2 fibers, 2 wavelengths, 3 seconds
- Encircled Flux compliant as required by ANSI/TIA and ISO/IEC
- Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with OptiFiber Pro OTDR
Fluke OptiFiber Pro OFP-100-QI OTDR
- Multiple wavelengths (850, 1300, 1310,1490, 1550 and 1625 nm) support LAN, datacenters, PON, FTTx and outside plant applications
- Automated setup senses fiber characteristics and sets measurement parameters
- Manual Expert mode allows simple adjustments to automated settings for detailed testing
Anritsu MT9085A Series ACCESS Master OTDR
- 8-inch LCD touch screen with easy visibility even in direct sunlight
- LCD touchscreen with a rotary knob and dedicated hard keys
- Familiar functions and operations from previous ACCESS Master series
Fujikura FSM-70S Single Fiber Fusion Splicer Kit
- Automated and programmable wind protector.
- 14-second automated tube heater.
- Fully robust for shock, dust and moisture.
Fluke OptiFiber Pro HDR OTDR S1625 Kit
- Taptive™ user interface puts advanced data analysis, easy set-up and operation at the fingertips of technicians of all skill levels
- SmartLoop OTDR enables automated testing and analysis of two fibers in a single test, eliminating the need to travel to the far end of the connection to perform tests
- Multiple wavelengths support a variety of applications: 850, 1300, 1310, 1490, 1550, 1625 nm
Fujikura FSM-70R Fusion Splicer
- Automated and programmable wind protector.
- 40-second automated tube heater.
- Fully ruggedized for shock, dust and moisture.
Sumitomo Quantum Type Q102-CA Fusion Splicer
- 5 second splice time, 9 second heaters.
- Per charge, 300 splice/heater cycles.
- Accessible smart phone interface.
Sumitomo Quantum Type Q101-M12 Mass Fusion Splicer
- RoHS compliant.
- Ruggedized design resistant to shock, water, dust.
- Automatic functions: Arc Calibration, Splice Start, Fiber Identification and Heater Start.
AFL FlexScan FS300 Quad OTDR PRO
- FOCIS Flex tips and cleaning
- WiFi W1 option: compatible with IEEE 802.11 / WLAN
- Multimode and Single-mode OTDR, including PON test
Fluke MultiFiber Pro Optical Power Meter and Fiber Test Kits
- Automatic scanning and testing of all fibers in MPO connectors with “Scan All”
- Support for both Multimode and Singlemode MPO trunks
- Eliminates the need for fan-out cords when testing fiber trunks
EXFO FTB-400 Universal Test System for Fiber Optic Networks
- Measures throughput, back-to-back (burstability), latency and frame loss as per RFC 2544
- EtherBERT™* for bit-error-rate testing of 10 Gigabit Ethernet circuits
- Performs packet jitter measurement (IP packet-delay variation as per RFC 3393) to qualify Ethernet transport networks for transmission of delay-sensitive traffic such as voice-over-IP (VoIP)
Fluke FTK1450 Complete Verification Kit
- Quickly and efficiently measure power and loss at SC, LC, and ST connections using the dual-wavelength testing feature in which both 850 and 1300 nm or 1310 and 1550 nm wavelengths can be transmitted
- Conveniently save measurements taken at both wavelengths into one record
- Eliminate time-consuming mistakes with the automatic wavelength detection ability
Fluke SimpliFiber Pro Optical Power Meter and Fiber Test Kits
- Dual-wavelength testing
- Tests multimode and singlemode fiber
- Measures optical power and loss at 850, 1300, 1310, 1490, 1550, 1625 nm wavelengths
Viavi DWDM OTDR TBERD/MTS-2000 Module
- C-Band (1528nm to 1568nm) tunable DWDM OTDR module at ITU-T G.694.1 wavelengths (CH12 to CH62)
- Integrated CW light source with modulation capability
- Instantaneous traffic detection
Viavi T-BERD 6000 Compact Optical Test Platform
- Lightweight platform at only 2.4 kg/5.3 lbs
- Large 8.4 inch transreflective TFT color display
- Graphical user interface with touchscreen option
TREND Networks FIBERTEK-IV-MM/SM Fiber Cable Certifier
- Attenuation/insertion loss (dB) measurement
- Multimode and single-mode options
- Encircled Flux compliant (optional)
Fujikura 70S+ Fusion Splicer with CT30 Cleaver
- Bluetooth wireless communication.
- Automatic and fully programmable wind protector.
- 13-second tube heater.
Fluke CableIQ Copper and Fiber Technician’s Kit
- Isolate cabling problems from network problems, save time and money by escalating fewer trouble tickets
- Four-second test quickly determines if your existing cabling can support voice/10/100, VoIP or Gigabit Ethernet
- Determine why the existing cabling plant cannot support the desired network speed (e.g. connection fault at 7 feet)
Viavi FIT-ATT-14 Fiber Inspection Kit (AT&T Bottom Kit)
Viavi FBP-ATT-15B Fiber Optic Test Kit (AT&T Top Kit)
ODM TTK 500 SM/MM Test, Inspection & Cleaning Kit
- USB connectivity and included ODM software package provide simple plug-and-play image-saving for closeout reporting.
- Comprehensive PASS/FAIL analysis compliant with IEC 61300-3-35 industry standard.
- Complete wet/dry cleaning system ensures the cleanest fiber endfaces possible.
EXFO LFD-300B/TG-300B FiberFinder Live Fiber Identifier/Tone Generator
- Pinpoints a specific live fiber using EXFO’s FiberFinder™ functionality
- Induces minimal loss: ≤ 1 dB
- Locates a particular dark fiber using tone recognition (270 Hz, 1 kHz, 2 kHz)
ODM TTK 650 SM Test, Inspection and Cleaning Kit
- VIS 400 inspection scope connects to included 8” Dell tablet via USB
- Automated PASS/FAIL compliance with IEC 61300-3-35 standard
- Optional PA 250 wireless access device transmits test data to devices within 200 feet