Related Products

Pacific Power 3210RLS-4W AC/DC Load Simulator | 21 kVA
- 15.0 - 1200 Hz
- 21 kW/kVA
- 7 kW / ± 1.5 % F.S.


NH Research 9430 Regenerative 4-Quadrant AC Load Series
- Outputs: 4 - 96kW, 260/520V, 1/Split/3Ø
- Frequency Ranges: 30 - 880Hz
- Input Powers: 10 - 175V, 350VRMS (L-N)


NH Research 4600 Series Programmable AC Load Banks
- 50 - 350 V
- 0 - 30 A
- 3 kW


ASCO LPC-100 Ultra-Compact, Portable Minuteman Load Bank 100 kW
- Rated for Continuous Operation
- Ultra-Compact, Portable, Easy to Transport and Operate
- Large Load Capacity – up to 100 KW


Adaptive Power Systems 4 Series Programmable Modular DC Electronic Loads
- Max. Power 300W per Module
- Wide Voltage Range, 0 - 500 Vdc
- Max. Current Range 60 Adc


ITECH IT8624
- Parallelable up to 43.2 kVA
- Oscilloscope display function
- High-speed AD sampling, real-time capture waveform

ASCO LPH-100 Compact, Portable AC Load Bank 100 KW
- Rated for Continuous Operation
- Compact, Portable, Easy to Transport and Operate
- Large Load Capacity - up to 100 KW AC


NH Research 4700 Series DC Loads
- 120V, 1kW/200A to 36kW/7200A
- 18 Voltage, Current, Power and Timing Measurements


Kikusui PLZ 5 kW DC Electronic Load System
- Wattage: 0 to 1000 W
- Current: 0 to 200A
- Voltage: 1.5 to 150 Vdc


Chroma 63206 DC Electronic Load 80 V, 600 A, 10.4 kW
- CC, CR, CV, CP load modes
- Master/Slave paralleling control mode, allow synchronous load control under static and dynamic loading mode (Up to 93.6kW)
- Dynamic loading : Up to 20kHz

Chroma 63803 AC/DC Electronic Load
- 1800W
- 50V ~ 350Vrms
- 45 ~ 440Hz

Megger Torkel 820 12, 24, 48 Volt DC Battery Load Unit
- External measurement input used to measure current in an external path by means of a clamp-on ammeter or a current shunt.
- Alarm output equipped with a relay contact for triggering an external alarm device.
- Start/Stop input used for starting and stopping discharging from an external device. Galvanically isolated.

Chroma 63210 DC Electronic Load 500 V, 150 A, 14.5 kW
- CC, CR, CV, CP load modes
- Master/Slave paralleling control mode, allow synchronous load control under static and dynamic loading mode (Up to 93.6kW)
- Dynamic loading : Up to 20kHz

Chroma 63105A DC Electronic Load Module 500 V, 10 A, 300 W
- Up to eight channels in one mainframe, for testing multiple output SMPS
- Parallel load modules up to 1200W for high current and power applications
- Synchronization with multiple loads

Eagle Eye LB-60-30 AC Load Bank
- 1ph 20kW AC load
- 3ph 30kW AC load
- 0-150V, 0-100A


Chroma 63207 DC Electronic Load 80 V, 30 A, 1040 W

Chroma 62180D-100
- 18kW / 100V / 180A
- Bidirectional DC Power Supply
- High Speed Transient Response <1.5ms

Chroma 63203 DC Electronic Load 1 to 80 V, 600 A, 5200 W
- Voltage range: 1-80V
- Power Rating: 5200W
- Current range: Up to 600A

Chroma 63630-80-60 DC Electronic Load 80 V, 60 A, 300 W
- Up to 10 channels in one mainframe,fit for testing multiple output SMPS
- 0.4V @ 80A (Typical) low voltage operating characteristics
- Flexible CC, CR, CV and CP operation modes

Cannon Load Banks L-100D Portable Load Bank
- Load steps: 10, 19, 28, 37, 46, 55, 64, 73, 82, 91, 100, 109KW @200VAC 400HZ Three Phase
- 400hz Aircraft connector
- Able to load three phase 200VAC up to 109KW in 9KW steps.


NH Research 4760 High Voltage Electronic DC Load | 600 V, 300 A
- 600 Volts, 300 Amps - Paralleling capability up to 1800 Amps or 36 kW
- 18 Voltage, Current, Power and Timing Measurements
- Complex load profile playback


NH Research 9300 High-Voltage Battery Test System
- Scalable to 2.4MW / 8000A
- Max Current @ 600V: 333A
- Current @ 1200V: ±167A


Chroma 63600 Series Modular DC Electronic Load
- Max. Power : 100W x 2(Dual), 300W, 400W
- Voltage Range : up to 80V
- 5 module mainframe Max. 2000W, load modules up to 400W/ea

Chroma 63209 DC Electronic Load | 15 kW, 80 V
- 15 kW, 1000 A, 80 V DC electronic load
- Four modes for different applications: CC, CR, CV, CP
- Master/Slave parallel control capability

Megger Torkel 950 Battery Load Unit
- Display range: 0.0 to 2999.0 A
- Basic inaccuracy: ±(0.5% of reading +0.1 A)
- Resolution: 0.1 A