IFI T188-300 TWT Amplifier | 7.5 GHz – 18 GHz, 300 W

The IFI T188-300 TWT amplifier operates over a frequency range of 7.5 – 18 GHz and generates 300 W of power. IFI T188-300 RF power amplifiers offer leading-edge digital display monitors, status indicators, fault detection and controls. Each IFI T188-300 amplifier is designed to meet IEC-348 safety requirements. The T188-300 is ideal for performing EMC testing compliant to MIL-STD-461, RTCA/DO-160 and SAE.

Product Info Related Products

Frequency Range: 7.5-18GHz
Min Power Out: 300 Watts
Min Sat Gain: 55dB
Max NF: 35dB
Spurious Outputs: -40 dBc, maximum. -50 dBc, available.
Input Impedance: 50 ohms, VSWR 2.0:1
Output Impedance: 50 ohms, VSWR 2.0:1 2.5:1 maximum.
Input Connector: Type N (Female)
Output Connector: WRD750 6.0 to 18.0 GHz

Mechanical:

Dimensions: 14"H x 19"W x 27"D Output Connector: 1.0 to 8.0 GHz, (Rack Mountable) (356mm x 483mm x 686mm)
Cooling: Internal forced air 12.0 to 18.0 GHz,WR62
Weight: 170 pounds typical (77kg)

Remote Operation
GPIB, RS422, RS485, RS232, or TTL Remote Control

Digital Display Monitors: Collector Current, Collector Voltage, Helix Current, Helix Voltage, Forward RF Power, Reflected
RF Power, Filament Hours, Beam Hours
Status Indicators: Power On, Standby, RF On/Operate
Faults: Helix Overcurrent, VSWR
Frequency Min Pwr Min Sat Max
Overload, Thermal Overloads, Air
Model Range Out* Gain* NF
Flow, Collector Overcurrent
Number (GHz) (Watts) (dB) (dB)

SKU: IFI-T188-300

Advanced Amplifiers AA-618G-300 Solid State Amplifier

6.0 - 18.0 GHz
300 W
55 dB min

Advanced Amplifiers AA-700M6G-300 Solid State Amplifier

0.7 - 6.0 GHz
300 W
53 dB min

Advanced Amplifiers AA-28G-400 Solid State CW/Pulse Amplifier

2.0 - 8.0 GHz
400 W
56 dB min

Amplifier Research 750S1G6 | 750 W (1 - 4.2 GHz), 500 W (4.2 - 6 GHz)

100% mismatch tolerant
Built-in fault monitoring and protection
Remote control: Ethernet, USB, GPIB, fiber-optic serial, RS-232

Advanced Amplifiers AA-12G-1000 Solid State Amplifier

1.0 - 2.5 GHz
1000 W
60 dB min

IFI S31-500 Solid State RF Power Amplifier 800 MHz - 3 GHz, 500 Watts

VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
Alternate Prime Power (specify at time of order)
GPIB IEEE 488 and RS232 Remote Control

Advanced Amplifiers AA-13G-500/1KWP Solid State RF Amplifier

Frequency Range: 0.8 - 3.2GHz
Output: 1kW, 60dBm
Duty Cycle: 10%, Pulse Width: up to 560μs

Advanced Amplifiers AA-2640G-40 Solid State Amplifier

26.5 - 40.0 GHz
40 W
46 dB min

Advanced Amplifiers AA-28G-500-GT TWT Pulse Amplifier

2.0 - 8.0 GHz
500 W
56 dB min

IFI S31-500-900P | Dual Mode CW/Pulse Amplifier

Frequency Range: 0.8 - 3.1GHz
Output: 900W, 60dBm
Duty Cycle: 10%, Pulse Width: 0.1 - 100μs

Advanced Amplifiers AA-118G-50 Solid-State High Power Amplifier

1.0 - 18.0 GHz
50 W
47 dB min

IFI T2618-40 Millimeter TWT Amplifier, 18 GHz - 26.5 GHz, 40 Watts

VSWR power protection allows the unit to operate without oscillation or damage
Records beam/filament elapsed time in hours
Features RF safetylock

IFI T825-500 TWT Amplifier, 2.5 - 8GHz, 500W

Instantaneous Broadband Frequency range
Modular Design Construction
Rugged Construction & High Reliability

Advanced Amplifiers AA-618G-40 Solid State Amplifier

6.0 - 18.0 GHz
40 W
46 dB min

IFI S61-100 Solid State Microwave Amplifier 1 GHz - 6 GHz

Solid State Design
Gain Control
Module & System Temp-Monitoring

IFI ST81-50 Solid State/TWT (CW) Amplifier 1.0 GHz - 8.0 GHz, 50 Watt

VSWR Protection against an output mismatch
Alternate Prime Power
GPIB IEEE 488 Remote Control

IFI T251-500A TWT Amplifier | 0.8 GHz – 2.5 GHz, 500 W

Digital display monitors: collector current, collector voltage, helix current, helix voltage, forward rf power, reflected rf power, filament hours, beam hours
Status indicators: power on, standby, RF on/operate
Faults: helix overcurrent, VSWR overload, thermal overloads, air flow, collector overcurrent

Amplifier Research 250S1G6

700 MHz- 6 GHz
250 W
54 dB

IFI GT251-500A CW/Pulse TWT Amplifier 1 GHz - 2.5 GHz, 500 Watts

Digital Display Monitors: Collector Current, Collector Voltage, Helix Current, Helix Voltage, Forward RF Power, Reflected RF Power, Filament Hours, Beam Hours
Status Indicators: Power On, Standby, RF On/Operate
Faults: Helix Overcurrent, VSWR Overload, Thermal Overloads, Air Flow, Collector Overcurrent

Empower 2223 Solid State Broadband Power Amplifier | 500 MHz to 6 GHz, 150 W

Solid-state Class AB, compact modular design
Suitable for CW, AM, FM, Pulse and some linear applications (consult factory for other modulation types)
Embedded directional coupler – eliminates the need for external component

Amplifier Research 120S1G3M1 Amplifier, 800 MHz - 3 GHz, 120 Watts

800 MHz - 3 GHz
120 W
CW Amplifier

IFI T82-500 TWT Amplifier, 2 - 8GHz, 500W

Solid state power supply
Instantaneous broadband frequency range
Modular design, rugged construction, force air cooling

IFI T42-200 TWT Amplifier 2 GHz - 4 GHz, 200 Watt

Digital Display Monitors: Collector Current, Collector Voltage, Helix Current, Helix Voltage, Forward RF Power, Reflected RF Power, Filament Hours, Beam Hours
Status Indicators: Power On, Standby, RF On/Operate
Faults: Helix Overcurrent, VSWR Overload, Thermal Overloads, Air Flow, Collector Overcurrent

IFI S41-200 Solid State Microwave Power Amplifier, 800 MHz - 4.2 GHz, 200 Watts

Solid State Design
Instantaneous Broadband Frequency range
Modular Design Construction

Advanced Amplifiers AA-16G-300 Solid State Amplifier

1.0 - 6.0 GHz
300 W
53 dB min