Keysight N4960A Serial BERT 17 and 32 Gb/s
- Full data rate pattern generation and error detection
- Integrated clock source with calibrated stress capability
- Built-in selection of PRBS and common telecom/datacom test patterns
Keysight M8040A Bit Error Rate Tester
- Data rates from 2 to 32 and 64 Gbaud
- PAM-4 and NRZ selectable from user interface
- Built-in 4 tap de-emphasis to compensate loss
Stanford Research Systems DG535 Digital Delay/Pulse Generator
- Load: 50Ω or high impedance
- Rise time: 2 - 3ns (typ.)
- Slew rate: 1V/ns
Tektronix DG2020 Data Timing Generator
- 200 Mbits/s maximum output data rate - Up to 64 K words/channel data word length
- Up to 36 output channels in 12-channel increments
- Up to 12 independent variable delay output (20 ns, 100 ps minimum resolution)
Tektronix CR286A Clock Recovery Instrument
- Instrumentation quality clock recovery.
- Accurate, variable loop bandwidth from 100 kHz to 12 MHz, with optional 24 MHz for the jitter transfer function (JTF) bandwidths of USB.
- 3.0, SATA 6G, and PCIe Gen-3.
Tektronix CR175A Clock Recovery Instrument
- Instrumentation quality clock recovery.
- Accurate, variable loop bandwidth from 100 kHz to 12 MHz, with optional 24 MHz for the jitter transfer function (JTF) bandwidths of USB.
- 3.0, SATA 6G, and PCIe Gen-3.
Tektronix CR125A Clock Recovery Instrument
- Instrumentation quality clock recovery.
- Accurate, variable loop bandwidth from 100 kHz to 12 MHz, with optional 24 MHz for the jitter transfer function (JTF) bandwidths of USB.
- 3.0, SATA 6G, and PCIe Gen-3.
Rohde & Schwarz CBT Bluetooth Tester
- Qualified by the Bluetooth SIG for RF measurements
- Highly flexible troubleshooting in R&D
- Very short measurement times for high throughput in production
Tektronix BSX320 Bit Error Rate Tester (BERT)
- Provides a single solution for receiver stress testing, debugging, and compliance.
- Test Gen-3 and Gen-4 standards including PCIe, SAS, and USB 3.1 and proprietary standards.
- DUT handshaking capability above 16 Gb/s supporting RX test requirements for loopback initiation and adaptive link training for key standards such as PCIe.
Tektronix BSX240 Bit Error Rate Tester (BERT)
- Provides a single solution for receiver stress testing, debugging, and compliance.
- Test Gen-3 and Gen-4 standards including PCIe, SAS, and USB 3.1 and proprietary standards.
- DUT handshaking capability above 16 Gb/s supporting RX test requirements for loopback initiation and adaptive link training for key standards such as PCIe.
Tektronix BSX125 Bit Error Rate Tester (BERT)
- Provides a single solution for receiver stress testing, debugging, and compliance.
- Test Gen-3 and Gen-4 standards including PCIe, SAS, and USB 3.1 and proprietary standards.
- DUT handshaking capability above 16 Gb/s supporting RX test requirements for loopback initiation and adaptive link training for key standards such as PCIe.
Tektronix BSA Series BERTScope Bit Error Rate Tester
- Integrated, calibrated stress generation to address the stressed receiver sensitivity and clock recovery jitter tolerance test requirements for a wide range of standards Sinusoidal jitter to
- Sinusoidal jitter to 100 MHz
- Random jitter
Keysight 81160A Pulse Noise Generator 330 MHz Pulse, 500 MHz Sine
- Generation of 330-MHz pulses and 500-MHz function/arbitrary waveforms with a 2.5-GSa/s sample rate and 14-bit vertical resolution;
- Selectable crest factors for white Gaussian noise lets engineers determine how much distortion to apply to a device during stress testing to meet various serial bus standards;
- Glitch-free timing parameter changes allow engineers to change the frequency without drop-outs or glitches and enable continuous operation without rebooting or resetting the device under test; and
Keysight 81150A High Voltage Pulse Generator
- 1 μHz to 120 MHz pulse generation with variable rise/fall time
- 1 μHz to 240 MHz sine waveform output
- 14-bit, 2 GSa/s arbitrary waveforms
Keysight 81134A Pulse Pattern Generator 3.35 GHz, 2 CH
- Frequency range from 15 MHz - 3.35 GHz
- Two ouput channels
- Low jitter
Keysight 81133A Pulse Pattern Generator 3.35 GHz, 1 CH
- Frequency range from 15 MHz - 3.35 GHz
- Single output channel
- Low jitter
Keysight 81110A Pulse Pattern Generator, 165/330 MHz
- Single-/dual-channel pulse pattern generator
- 165 MHz, 10 V, 50 Ω into 50 Ω (81111A) OR
- 330 MHz, 3.8 V, 50 Ω into 50 Ω (81112A)
Berkeley 575 Digital Delay / Pulse Generator
- 250pS Delay & Width Resolution on 8 channels
- 50pS channel Jitter / 800pS RMS Ext. jitter
- Independent clock rates for each channel
Keysight J-BERT M8020A Bit Error Rate Tester (BERT)
- Data rates up to 8.5 and 16 Gb/s expandable to 32 Gb/s
- 1 to 4 BERT channels in a 5-slot AXIe chassis
- Integrated and calibrated jitter injection: RJ, PJ1, PJ2, SJ, BUJ, sinusoidal level interference
Keysight M8030A Multi-Channel BERT
- Data rates up to 8.5 Gb/s and 16 Gb/s
- Up to 10 BERT pattern generator and analyzer channels in a 14-slot AXIe chassis
- Integrated and calibrated jitter injection: RJ, PJ1, PJ2, SJ, BUJ, sinusoidal level interference
Keysight J-BERT N4903B High-Performance Serial BERT
- Excellent precision and sensitivity for accurate measurements
- Choice of feature set and frequency classes to tailor to test needs and budget
- State-of-the-art user interfaces with color touch screen
Keysight N4962A Serial BERT
- Internal and external clock system
- 0.5 to 12.5 Gb/s operation
- Multiple clock and pattern triggers
Tektronix BSX-BERTScope Series Bit Error Rate Testers (BERT)
- Provides a single solution for receiver stress testing, debugging, and compliance.
- Test Gen-3 and Gen-4 standards including PCIe, SAS, and USB 3.1 and proprietary standards.
- DUT handshaking capability above 16 Gb/s supporting RX test requirements for loopback initiation and adaptive link training for key standards such as PCIe.
EXFO FTBx-88460 Bit Error Rate Tester
- 400G Ethernet testing capabilities based on the IEEE 802.3bs standard
- State-of-the-art Open Transceiver System (OTS) design for full flexibility with current and future transceivers
- Flex Ethernet (FlexE) testing capabilities with low and high-speed Ethernet clients supported on 4xQSFP28 ports
Tektronix Clock Recovery (CR) BERTScope Series
- Instrumentation quality clock recovery.
- Accurate, variable loop bandwidth from 100 kHz to 12 MHz, with optional 24 MHz for the jitter transfer function (JTF) bandwidths of USB.
- 3.0, SATA 6G, and PCIe Gen-3.