Skip to Content
Return to the home page Return to the home page
800-404-2832

Nothing found in quick search

View all results

Make a Payment Contact Us Welcome! Log In
items in cart

Menu

Products

EMC Test & Measurement

EMC Test & Measurement

View All
RF Power Amplifiers
Transient Generators
EMC Antennas
Conducted RF Immunity Systems
EMI Receivers
EMI Pre-Compliance Test Receivers
LISNs
Harmonics & Flicker
ESD Guns
EMC Accessories
RF Shielded Enclosures
EMP Generators
E-Field Probes
EMC Scanners

Power Supplies & Loads

Power Supplies & Loads

View All
AC Power Supplies
AC Loads
DC Power Supplies
DC Loads
Grid Simulators
Precision Power Analyzers
Variable Transformers
Solar Array Simulators
Bidirectional Power Supplies

Battery Testing

Battery Testing

View All
Battery Cell Testers
Battery Module Tester
Battery Pack Cycler
Battery Cell Monitoring Systems
Battery Impedance Testers
Battery Test Chambers
EVSE Test Equipment
Source Measure Units (SMU)
Potentiostats & Galvanostats

RF Testing & Inspection

RF Testing & Inspection

View All
RF Signal Generators
Spectrum Analyzers
Phase Noise Analyzers
Noise Figure Analyzers and Sources
Audio Analyzers
Vector Network Analyzers
Digital Radio Test Sets
Flight Line Test Sets
Frequency Counters
Function Generators
GNSS Simulators
Handheld Cable & Antenna Analyzers
Drive & Walk Testers
Lock-in Amplifiers
Pulse Pattern Generators
Interference Analyzers
RF Power Meters
Vector Signal Generators (VSG)
Wireless Communications Test Sets
RF Accessories

NDT / Inspection

NDT / Inspection

View All
Visual Inspection
Vibration Analyzers
Laser Shaft Alignment
Roughness Testers
Helium Leak Detectors
XRF Analyzers
LIBS Analyzers
Ground Penetrating Radar (GPR)
Ultrasonic Flaw Detectors
Eddy Current Flaw Detectors
Ultrasonic Thickness Gauges
Vibration Meters
Laser Micrometers
Laser Doppler Vibrometers
Coordinate Measuring Machines (CMMs)
Hardness Testers
Holiday Detectors
Ionographs
3D Laser Scanners
Industrial CT Scanners
Adhesion Testers
Corrosion Detectors

Electrical

Electrical

View All
Power Quality Monitoring
Protection Relay Test Sets
Handheld Oscilloscopes
Hipot Testers
Ground Resistance Testers
Transformer Turns Ratio (TTR) Testers
Megohmmeters/Insulation Testers
Digital Low Resistance Ohmmeters (DLRO)
Electric Motor Analyzers
Winding Resistance Meters
Circuit Breaker Testing
Sweep Frequency Response Analyzers
Dielectric Oil Testers
Partial Discharge Testers
Power Factor Test Sets | Tan Delta
Solar PV Testers
Electrical Safety Analyzers
Transmission Line Testing
Igniter Testers
AC & DC Current Clamps
Vacuum Interrupter Testers

Telecom & Network

Telecom & Network

View All
LAN Cable Certifiers
OLTS | Fiber Certifiers
OTDR | Optical Time Domain Reflectometers
DWDM & CWDM OTDRs
Fiber Optic Test Equipment
Fusion Splicers
Fiber Optic Inspection
Bit Error Rate Testers (BERT)
MPO Fiber Testers
Wifi Testers
Ethernet Network Testers
Transport Network Testers
Data Network
Wireless & Cellular Test Equipment
DSL & Copper Testers
CATV & DOCSIS Testers

Environmental Simulation

Environmental Simulation

View All
Environmental Test Chambers
Temperature Forcing Systems
Recirculating Chillers
Universal Testing Machines | Force Testers
Particle Impact Noise Detection (PIND)
Shaker Systems
Shock Testers
Abrasion and Pilling Testers

RF Safety

RF Safety

View All
RF Survey Meters
Area Monitors
Personal RF Monitors
Portable RF Monitoring & Direction-Finding Equipment
Gauss Meters

Calibrators

Calibrators

View All
Electrical Standards & References
Environmental Calibration Equipment
Pressure Calibration Equipment
Process Calibrator
Digital Multimeters

Environmental Monitoring

Environmental Monitoring

View All
Optical Gas Imaging Cameras (OGI)
Sound Level Meters
Particle Counters
Gas Analyzers
Gas Area Monitors
Confined Space Gas Monitors
Dew Point | Moisture Meters
Ion Chamber Survey Meters
Ultrasonic Flow Meters
Spectrophotometers
Light & Color Meters

Data Acquisition

Data Acquisition

View All
Data Loggers
High-Speed Data Acquisition
Temperature DAQ
Sound & Vibration DAQ
Strain Gauge Amplifiers
Signal Conditioners
Accelerometers

Electronics Lab Equipment

Electronics Lab Equipment

View All
Oscilloscopes
Oscilloscope Probes
LCR Meters
LCR Meter Test Fixtures
Impedance Analyzers
Benchtop Power Supplies
Semiconductor Parameter Analyzers
Milliohm Meters
Lightwave & Optical Test Equipment
Medical Device Testing View All Products View All Brands

Solutions

Data Center Testing Solutions Radiated Immunity Testing What is EMI/EMC Testing? Radiated Emissions Testing How to Splice Fiber Optic Cables EV Battery Testing Methods What is XRF Testing? Electrostatic Discharge (ESD) Testing What Is an RF Amplifier? How to Find RF Interference Laser Alignment Clean Room Testing Multipaction Testing 5G Test Equipment Aircraft EMC Testing Automotive EMC Test Equipment Building Envelope Testing Cell Tower Testing Doble’s Original Power Factor Test Fiber Testing Military Standard Testing Solutions What Is OTDR Testing? Power Quality Instrument Selection Guide What is RF Spectrum Monitoring? Substation Maintenance What Is Drone Detection Equipment? Using A Visual Inspection Camera What Is A Direction Finder? What Is A High Precision Power Analyzer? What Is Material Testing? What Is PIM Mitigation? What is PIND Testing? What is VLF Cable Testing? Workplace Health & Safety Equipment Choosing an Environmental Chamber NDT | Non-Destructive Testing HIRF Testing View All Solutions

Resources

Articles & Guides

Articles & Guides

View All
ATEC Blog Video Library

ATEC Academy

ATEC Academy

View All
Event Calendar FAQs Letter of Justification Past Events Who Should Attend

News & Updates

News & Updates

View All
ATEC News Press Releases

Standards

IEC Standards

IEC Standards

View All
IEC 60050-444 International Electrotechnical Vocabulary Part 444: Elementary Relays IEC 60255: Electrical Relays IEC 60270: Partial Discharge Measurements IEC 60533: EMC Testing of Ships with Metallic Hulls IEC 60601-1-2: Medical Electrical Equipment - Collateral standard: Electromagnetic compatibility... IEC 61000-3-2: Limits - Limits for Harmonic Current Emissions (equipment input current up to and... IEC 61000-3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public... IEC 61000-3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker... IEC 61000-3-12: Limits for harmonic currents produced by equipment connected to public... IEC 61000-3-13: Electromagnetic compatibility (EMC) Limits - Assessment of emission limits for... IEC 61000-4-2: Electrostatic Discharge Immunity Test IEC 61000-4-3: Radiated, radio-frequency, electromagnetic field immunity test IEC 61000-4-4: Electrical Fast Transient (EFT) / EMC Burst Immunity Test Standard IEC 61000-4-5: Testing and Measurement techniques - Surge Immunity Test IEC 61000-4-6: Immunity to Conducted Disturbances, Induced by Radio Frequency Fields IEC 61000-4-7: General Guide on Harmonics and Interharmonics Measurements and Instrumentation IEC 61000-4-8 Electromagnetic Compatibility (EMC) - Part 4-8: Testing and Measurement Techniques... IEC 61000-4-9 Electromagnetic Compatibility (EMC) - Part 4-9: Testing and Measurement Techniques... IEC 61000-4-10: Testing and Measurement Techniques Damped Oscillatory Magnetic Field Immunity Test IEC 61000-4-11: Testing and Measurement Techniques - Voltage Dips, Short Interruptions and... IEC 61000-4-12: Testing and measurement techniques - Ring wave immunity test IEC 61000-4-13: Testing and measurement techniques - Harmonics and interharmonics including mains... IEC 61000-4-14: Testing and measurement techniques - Voltage fluctuation immunity test IEC 61000-4-15: Testing and Measurement Techniques - Flickermeter. Functional and Design... IEC 61000-4-16: Testing and Measurement Techniques – Test for Immunity to Conducted, Common Mode... IEC 61000-4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test IEC 61000-4-18: Testing and measurement techniques – Damped oscillatory wave immunity test IEC 61000-4-19: Test for Immunity to Conducted, Differential Mode Disturbances and Signaling IEC 61000-4-20 Electromagnetic compatibility (EMC) – Part 4-20: Testing and measurement techniques... IEC 61000-4-21 Electromagnetic compatibility (EMC) Part 4-21: Testing and measurement techniques... IEC 61000-4-27: Unbalance, immunity test IEC 61000-4-28: Testing and measurement techniques - Variation of power frequency, immunity test IEC 61000-4-29 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement... IEC 61000-4-30: Testing and Measurement Techniques - Power Quality Measurement Methods. IEC 61000-4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance IEC 61000-4-34: Testing and Measurement Techniques - Voltage Dips, Short Interruptions... IEC 61000-4-39:2017: Electromagnetic Compatibility Immunity Requirements IEC 61000-6-2: Immunity Testing of Industrial Equipment IEC 61000-6-4: Emission standard for industrial environments IEC 61000-6-5: Immunity for Power Station and Substation Environments IEC 61010-1: Safety of Measuring, Control and Laboratory Equipment IEC 61326: EMC Testing of Laboratory Equipment IEC 61340-3-1: Methods for Replication of Electrostatic Effects - Human Body Model (HBM)... IEC 61340-3-2: Methods for Replication of Electrostatic Effects – Machine Model (MM)... IEC 61672-1: Electroacoustics – Sound level meters – Part 1: Specifications IEC 61672-2: Electroacoustics – Sound level meters – Part 2: Pattern evaluation tests IEC 61672-3: Electroacoustics – Sound level meters – Part 3: Periodic tests IEC 61850: Communication Networks and Systems in Substations IEC 62037: Passive RF and Microwave Devices, Intermodulation Level Measurement IEC 62233: Electromagnetic Fields of Household Appliances and Similar Apparatus with Regard to Human IEC 62619: Safety Requirements for Secondary Lithium Cells and Batteries, for Use in Industrial Applications IEC 62764-1: Low-Frequency Magnetic Fields

MIL Standards

MIL Standards

View All
MIL-STD-188-125-2: HEMP Protection for Ground-Based C41 Facilities Performing Critical Missions... MIL-STD-461 MIL-STD-461F: Electromagnetic Interference Characteristics of Equipment MIL-STD-461G: Electromagnetic Interference Characteristics of Equipment MIL-STD-461G CE101, CE102: Conducted Emissions, Audio Frequency Currents and Radio Frequency... MIL-STD-461G CE106: Conducted Emissions, Antenna Port MIL-STD-461G CS101: Conducted Susceptibility, Power Leads MIL-STD-461G CS103: Conducted Susceptibility, Antenna Port, Intermodulation MIL-STD-461G CS104: Conducted Susceptibility, Antenna Port, Rejection of Undesired Signals MIL-STD-461G CS105: Conducted Susceptibility, Antenna Port, Cross-Modulation MIL-STD-461G CS106: Conducted Susceptibility, Transients, Power Leads MIL-STD-461G CS109: Conducted Susceptibility, Structure Current MIL-STD-461G CS114: Conducted Susceptibility, Bulk Cable Injection MIL-STD-461G CS115: Conducted Susceptibility, Bulk Cable Injection, Impulse Excitation MIL-STD-461G CS116: Conducted Susceptibility, Damped Sinusoidal Transients, Cables and Power Leads MIL-STD-461G CS117: Conducted Susceptibility, Lightning Induced Transients, Cables and Power Leads MIL-STD-461G CS118: Personnel Borne Electrostatic Discharge (ESD) MIL-STD-461G RE101: Radiated Emissions, Magnetic Field MIL-STD-461G RE102: Radiated Emissions, Electric Field MIL-STD-461G RE103: Radiated Emissions, Antenna Outputs MIL-STD-461G RS101: Radiated Susceptibility, Magnetic Field MIL-STD-461G RS103: Radiated Susceptibility, Electric Field MIL-STD-461G RS105: Radiated Susceptibility, Transient Electromagnetic Field, or EMP... MIL-STD-464: RF Environmental Effects on Systems MIL-STD-704: Aircraft Electric Power Characteristics MIL-STD-750: Test Methods for Semiconductor Devices MIL-STD-810G: Test Method Standard for Environmental Engineering Considerations and Laboratory Tests MIL-STD-883: Test Method Standard, Microcircuits MIL-STD-1275: Characteristics of 28 Volt DC Input Power to Military Vehicles MIL-STD-1399-300: Interface Standard for Shipboard Systems MIL-STD-1553: Aircraft Internal Time Division Command/Response Multiplex Data Bus MIL-STD-1576: Electroexplosive Subsystem Safety Requirements and Test Methods For Space Systems

ANSI/IEEE Standards

ANSI/IEEE Standards

View All
ANSI C62.45: Guide On Surge Testing For Equipment Connected To Low-Voltage AC Power Circuits ANSI C63.2: American National Standard For Specifications Of Electromagnetic Interference And Field ANSI C63.4: American National Standard for Methods of Measurement of Radio-Noise Emissions from... ANSI C63.16: American National Standard Guide For Electrostatic Discharge Test Methodologies And... ANSI/IEEE C37.90: Standard for Relays and Relay Systems Associated with Electric Power Apparatus ANSI/IEEE C37.90.1: Surge Withstand Capability (SWC) Tests for Relays and Relay Systems... ANSI/IEEE C62.41: IEEE Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits ANSI/IEEE C95.1: Standard for Safety Levels with Respect to Human Exposure to Radio Frequency...

RTCA/DO-160 Standards

RTCA/DO-160 Standards

View All
RTCA/DO-160 Section 5: Temperature Variation Testing RTCA/DO-160 Section 6: Humidity Testing RTCA/DO-160 Section 8: Vibration Testing RTCA/DO-160 Section 10: Waterproofness Testing RTCA/DO-160 Section 15: Magnetic Effect RTCA/DO-160 Section 16: Power Input RTCA/DO-160 Section 17: Voltage Spike RTCA/DO-160 Section 18: Audio Frequency Conducted Susceptibility – Power Inputs RTCA/DO-160 Section 19: Induced Signal Susceptibility RTCA/DO-160 Section 20: Radio Frequency Susceptibility (Conducted/Radiated) RTCA/DO-160 Section 21: Emission of Radio Frequency Energy RTCA/DO-160 Section 22: Lightning Induced Transient Susceptibility RTCA/DO-160 Section 23: Lightning Direct Effects RTCA/DO-160 Section 25: Electrostatic Discharge (ESD)

IEC CISPR Standards

IEC CISPR Standards

View All
CISPR 11: Industrial, scientific and medical equipment CISPR 12: Vehicles, boats, and internal combustion engine driven devices CISPR 14-1: Electromagnetic compatibility - Household Appliances CISPR 14-2: Electromagnetic compatibility - Part 2: Immunity CISPR 16-1-1: Measuring apparatus CISPR 16-1-3: Ancillary equipment – Disturbance power CISPR 16-1-4: Ancillary equipment – Radiated disturbances CISPR 16-2: Specification for radio disturbance and immunity CISPR 22: Information technology equipment CISPR 24: Immunity Testing of ITE CISPR 25: Vehicles, boats and internal combustion engines CISPR 32: Electromagnetic compatibility of multimedia equipment

EN Standards

EN Standards

View All
EN 45502-1: Implants for surgery - Active implantable medical devices - General requirements for... EN 45502-2-2: Particular requirements for active implantable medical devices intended to treat... EN 50082-1: Electromagnetic compatibility - Generic immunity standard - Part 1: Residential... EN 50082-2: Electromagnetic compatibility - Generic immunity standard - Part 2: Industrial... EN 50121-1: Railway applications - Electromagnetic compatibility - Part 1: General EN 50173: Information technology - Generic cabling systems EN 50191: The Erection and Operation of Electrical Test Installations EN 55011: Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics EN 55022: Information technology equipment - Radio disturbance characteristics - Limits and methods EN 61000-6: Electromagnetic compatibility (EMC) - Part 6: Generic Standards

ISO Standards

ISO Standards

View All
ISO 7196:1995 Acoustics — Frequency-weighting characteristic for infrasound measurements ISO 7637: Road Vehicles – Electrical Disturbances from Conduction and Coupling ISO 7637-2: Electrical Transient Conduction Along Supply Lines Only ISO 10605: Road Vehicles—Test Methods for Electrical Disturbances from Electrostatic Discharge ISO 11452: Immunity Testing of Road Vehicle Components ISO 11452-4:2020 BCI Testing in Road Vehicles ISO 11801:2002 - Information technology – Generic cabling for customer premises ISO 13766-1: 2018 Earth-Moving and Building Construction Machinery ISO 14117: EMC test protocols for implantable cardiac pacemakers, implantable cardioverter... ISO 14644 Series: Cleanroom Standards ISO 14982: Agricultural and Forestry Machinery ISO 16750-2: Road Vehicles: Environmental Conditions and Testing for Electrical and Electronic... ISO 21501-4: Light Scattering Airborne Particle Counter for Clean Spaces

Boeing Standards

Boeing Standards

View All
Boeing D6-16050-4: Electromagnetic Interference Control Requirements Boeing D6-16050-5: Electromagnetic Interference Control Requirements for Composite Airplanes

LV Standards

LV Standards

View All
LV 123 LV 124 Electric and Electronic Components in Motor Vehicles up to 3.5t LV 148: Electric and Electronic components for vehicles

FCC Standards

FCC Standards

View All
FCC Part 15: Radio Frequency Devices
View All Standards
Calibration Request a Quote
Make a Payment Contact Us Welcome! Log In
ILAC Accreditation A2LA Accreditation ISO-9001 Accreditation +1-800-404-2832
Categories  >  Data Acquisition  >  Data Loggers  >  Racelogic VBOX4
Image of Racelogic VBOX4

Racelogic

Racelogic VBOX4

Automotive Data Logger

The Racelogic VBOX 4 is an automotive and vehicle test data logger that performs high-accuracy data acquisition (DAQ) during automotive performance testing. As a GNSS Logger, it uses a 100Hz receiver with RTK positioning to achieve centimeter-level positional accuracy, while its CAN capabilities allow vehicle data to be synchronized directly with GNSS measurements. The VBOX 4 can also integrate with an IMU to provide pitch, roll, and slip measurements while improving data accuracy when GNSS reception is compromised. This device can collect precise motion and vehicle data, with velocity accuracy of 0.1km/h and RTK horizontal position accuracy of 5mm + 0.5ppm of baseline.

Racelogic logo
Product Info Related Products
Analog Input Channels 4 channels
CAN Output Rate 100Hz
CAN Baud Rate Selectable up to 1Mbit/s
CAN FD Data Rate Selectable up to 5Mbit/s
Analog Input Update Rate 500Hz
Analog Input Range ±50V
GNSS Update Rate 100Hz
GNSS Signals Tracked GPS L1/L2
GLONASS L1/L2
Velocity Accuracy 0.1km/h
Velocity Resolution 0.01km/h
Standalone Position Accuracy Vertical: 1.8m
Horizontal: 1.2m
RTK Position Accuracy Vertical: 10mm + 0.8ppm × baseline
Horizontal: 5mm + 0.5ppm × baseline
Distance Accuracy ±0.05%
Distance Resolution 1cm
  • RTK as standard - 100Hz GNSS TRK receiver delivers cm-level accuracy when combined with an NTRIP modern or Base Station.
  • Full CAN logging - Two dedicated CAN FD ports, an additional CAN Bus and a fourth Bus for Racelogic module input.
  • Brake trigger - Capture the precise moment that braking starts, delivering brake stop accuracy to within ±1.8cm.
  • Robot compatibility - Compatible with driving robots from all leading manufacturers including AB Dynamics, Humanetics, VEHICO, Stähle and 4a.
  • Inertial navigation system
  • Automotive testing and validation
    • performance
    • brake and tire testing
    • pass-by-noise and coastdown testing
  • ADAS testing
  • Vehicle dynamics testing/Data logging
  • Automotive GPS test data logger
  • Measures force to SAE and ECE standards
  • Euro NCAP
  • UN R79
  • ISO 16787


SKU: RACE-VBOX4
Request a Quote

Product Categories

Data Acquisition
Data Loggers

Related Product Documents

Brochure (2.72 MB)

Give Us a Call:

800-404-2832

Related Products

Dewesoft Krypton 8XLV DAQ System

  • Self-Developed Profile
  • Data Butter
  • Plug and Play
DEWEsoft Logo

Dewesoft Krypton 8XACC Module

  • IEPE accelerometer and microphone and voltage input
  • Available in 1, 4, and 8 channels
  • Isolated IEPE and voltage input
DEWEsoft Logo

Dewesoft SIRIUS-SBOXe (for the Dewesoft Krypton 8XLV DAQ System)

  • Designed to be used with the Dewesoft Krypton 8XLV DAQ System
  • SBOX with EtherCAT® interface
  • Available in modular and rack solution
DEWEsoft Logo
Rent AstroNova IEPE-6

AstroNova IEPE-6 6-Channel Voltage Input Module

  • Sample Rate: Up to 800 kS/s per channel
  • Resolution: 16‑bit SAR ADC
  • Input Isolation: 250 Vrms
Front of Keysight DAQ973A

Keysight DAQ973A Data Acquisition System

  • 3-slot mainframe with USB, LAN and GPIB interfaces
  • 6 1/2-digit (22-bit) internal DMM, scanning up to 450 channels per second with new solid-state multiplexer module
  • 9 switch and control plug-in modules to choose from
Keysight

Fluke 2645A NetDAQ Data Logger

  • Channel Capacity Analog Inputs: 20; Computed channels: 10 Digital I/O Alarm Outputs: 8 total; Totalizer: 1
  • Analog Inputs: 20; Computed channels: 10
  • Digital I/O Alarm Outputs: 8 total; Totalizer: 1
Fluke Logo

Fluke 2640A NetDAQ Networked Data Acquisition Unit

  • Supports performance testing, calibration, servicing, and maintenance
  • Windows-based application software for 2640A NetDAQ mainframes
  • No programming required
Fluke Calibration 2638A Hydra Series III

Fluke 2638A Hydra Series III Data Acquisition System/Digital Multimeter

  • DC accuracy of 0.0024 %
  • Thermocouple accuracy of 0.5 °C
  • Up to 66 universal differential isolated inputs

Eagle Eye BDL-48 48V Battery Data Logger Kit

  • Simultaneously monitor cell voltage, string voltage, string current and ambient temperature
  • Lightweight modular DAC design for easy installation and operation
  • Tests 1.2V, 2V, 6V, and 12V batteries

Keysight 34970A Data Acquisition & Switching Unit

  • 34901A: 20-ch. Multiplexer
  • 34902A: 16-ch. Multiplexer
  • 34903A: 20-ch. Actuator/GP Switch
Keysight
Yokogawa FX106 Six Channel Paperless Recorder

Yokogawa FX106 Six Channel Paperless Recorder

  • 6 Input Channels
  • 250 Vrms AC (50/60Hz) Max Mode Noise
  • Measurement intervals: 1s, 2s
Dewesoft KRYPTON-1xAO Analog Output Module

Dewesoft KRYPTON-1xAO Analog Output Module

  • Output Range: ±10 V full scale
  • Resolution: 18-bit DAC
  • Update Rate: 20 kS/s
DEWEsoft Logo
Dewesoft KRYPTONi-1xHV DAQ System

Dewesoft KRYPTONi-1xHV DAQ System

  • Input: Voltage, ±1000 V (single channel)
  • Isolation category: CAT II 1000 V
  • Power consumption: 1.3 W (typ.)
DEWEsoft Logo
Keysight 34980A Multifunction Switch/Measure Unit

Keysight 34980A Multifunction Switch/Measure Unit

  • Max bandwidth: 45MHz
  • Max volts: ±300V
  • Slots/modules: 8/21
Keysight
Keyence NR-500 Multi-Input Data Logger

Keyence NR-500 Multi-Input Data Logger

  • Max. 100 kHz for all acquisition channels
  • Synchronization between measurement units ±1 µs or less
  • Multi-channel measurement < 576 channels
Keyence NR-X100W Multi-Input Data Logger

Keyence NR-X100W Multi-Input Data Logger

  • 10Hz Sampling Rate
  • 8 Channels
  • 24-bit A/D Reolution

DTS SLICE PRO SIM 18-Channel Data Acquisition System

  • 3k ohm half-bridge completion
  • 120 or 350 ohm 3/4 bridge completion for strain gages, etc.
  • Microprocessor, excitation, signal conditioning, adjustable filters

Dewesoft Sirius Series Data Acquisition Systems (DAQ)

  • USB/EtherCAT Interface - SIRIUS DAQ systems can be connected via USB or EtherCAT to any Windows-compatible PC or to a high-performance SBOX data logger.
  • Universal Analog Inputs - Universal analog amplifiers can accept voltage and full/half/quarter bridge signals natively as well as IEPE, charge, thermocouples, RTD, current, resistance, and LVDT
  • 1 MHz Sampling Rate - A combination of software and hardware allows for acquisition speeds up to 1 MHz per channel on SIRIUS HS devices with real-time data processing and streaming to disk.
DEWEsoft Logo

Keysight 3488A Data Acquisition Switch Unit

  • DC - 26.5 GHz signal switching
  • Matrix, multiplexer, & general purpose relays
  • Digital I/O control & actuation
Keysight

Yokogawa MV1006 Portable Paperless Recorder

  • Multi-point Input: 24-channel input
  • Reliable Long-duration Memory Internal memory: 200 MB (Approximately 75-day continuous 12-channel measurement data storage at a 1-second data storage interval)
  • Data can be stored in external storage media, such as a CF card and USB memory.

Hioki LR8400-20 Memory HiLogger

  • Environmental measurements to prevent global warming
  • Development of fuel cell materials, energy field
  • Development of automobiles, testing of automobile parts

Keysight 34972A LXI Data Acquisition / Data Logger Switch Unit

  • 3-slot LXI data acquisition unit with 6 ½-digit DMM (22-bit) and 8 plug-in modules to choose from
  • Measures 11 different input signals including temperature with thermocouples, RTDs and thermistors; DC/AC volts or current; 2- or 4-wire resistance; frequency and period
  • Accepts all 34970A switch and control plug-in modules, and is backward compatible with the 34970A SCPI command set
Keysight

Keithley 2750 Multimeter/Switch System

  • Up to 200 differential input channels (with 300V isolation) for measurement and control
  • Combines functions of DMM, switch system, and data-logger
  • True 6½-digit (22-bit) resolution

Fluke 2686A Data Logging System Chassis

  • 20 to 120 universal analog inputs per chassis; systems to +2,000 channels
  • Stand-alone data logger operation with the 2686A
  • Large scalable LAN systems using the 2680A with 10BaseT/100BaseT
Fluke Logo

Fluke 2635A Hydra Data Logger 21 Ch

  • Channel Capacity: Analog Inputs: 21; Digital I/O & Alarm Outputs: 12 total; Totalizer: 1
  • MEASUREMENT: DC Voltage Range: 300mV - 300/150V DC Voltage Resolution: 10µV - 100mV Resistance: 300 ohms to 10 M ohms Resistance Resolution: 10 M ohms to K ohms AC Voltage
  • DC Voltage Range: 300mV - 300/150V
Follow Us: facebook X instagram linkedin youtube
Return to the home page

Rentals

Sales

Calibration

Service

10401 Roselle Street
San Diego, CA 92121

+1-800-404-2832

Request a Quote

Our Products

Products Brands Our Partners Solutions Standards

Customer Service

Make a Payment Forms Return Shipping Instructions FAQs Terms & Conditions

Our Company

Contact Us About Us News Blog Careers
ILAC Accreditation A2LA Accreditation ISO-9001 Accreditation

© 2026 Advanced Test Equipment Corp. All Rights Reserved

Privacy Notice Site Map

Cookie Notice

This website uses cookies to improve your experience. Learn more