Megger TELEFLEX-SX1 Time-Domain Reflectometer
- 20m - 160km at VOP = 80m/μs
- Pulse width: 20ns - 10μs
- Dynamic Range: <96dB
High Voltage Inc. VT33 VLF Thumper
- VLF cables up to 25 kV rating per IEEE 400.2, VDE DIN 0276 & CENELEC
- 13 kV @ 760 joules impulse rating
- VLF burn cable faults
Fluke GFL-1500 Solar Ground Fault Locator
- Up to 1500V DC (CAT III 1500V / CAT IV 600V)
- Detection: Up to 5.9 m in air
- Analyze, Fault Tracing, Open Circuit, & Mapping
Megger T3090 Time Domain Reflectometer
- 0-25,000 ft continuous
- Automatic or manual range selection
- Optional sectionalizing
Megger MTDR300 3 Phase Time Domain Reflectometer
- Battery and main power supply operation
- Range >55 km/34 miles (TDR)
- Range >220 km/137 miles (transient)
Megger DigiPHONE+ Cable Fault Pinpointer
- Finds the fault with unprecedented accuracy
- Offers simple visual directions
- Possesses smart background noise reduction
Megger EZ-Restore Overdrive Cable Fault Locator
- Has back-feed alert
- Weighs less than 48.5 lbs
- Offers unique USB load
Megger CI Cable Identifier
- Identifies a de-energized primary cable safely
- Identifies live secondary cables up to 240 VAC
- Avoids false positives
Megger MTDR1 Single-Phase Time Domain Reflectometer
- Multiple fault locating methods
- Auto-ranging and auto-fault distancemodes
- Single-phase, two-channel transceiver
Megger DigiPHONE+ NT Pinpointing Receiver Set
- digiPHONE+ Automatic adjustment of values BNR – Background Noise Reduction APM – Auto Proximity Mute when approaching the handle. (acoustic impact protection) 84 dB(A)
- Automatic adjustment of values
- BNR – Background Noise Reduction
Radiodetection RD7200 Cable & Pipe Locator
- Speed, accuracy, and reliable performance
- Easy to setup and use
- High performance audio system and vibration alerts for noisy environments
Dynatel 7420 Tape Locator
- 6 active frequencies for direct connect
- Trace view mapping display mode
- 4 induction frequencies with maximum allowed output power
Megger MPP2000 Cable Fault Pinpointer
- Universal pinpoint fault location system
- Ergonomic, rugged, weather resistant case
- Electromagnetic, acoustic and time delay fault location methods
Megger Easyloc
- Locate underground cables and pipe lines quickly and effortlessly
- High dynamic range in passive mode
- Direct connection, inductive coupling and general induction active modes
Leica DD230 SMART Underground Utility Locator
- DX Field Shield Fast and easy transfer of locator data and site documentation.
- Fast and easy transfer of locator data and site documentation.
- DX Office Shield Provides product configuration, maintenance, and usage analysis.
Leica DD130 Underground Cable Locator
- Extended trace range with an additional 512 Hz, 640 Hz frequencies
- Signal current measurement
- Increased depth detection up to 10 m (33 feet)
MOHR CT100HF High Resolution TDR Cable Tester
- As low as 60 ps system risetime (20‐80%)
- 75 micron (0.003 in.) cursor resolution
- 16‐bit digital sampling
MOHR CT100B TDR Cable Analyzer
- Rugged portable TDR with S‐parameter tools
- Resolves connector detail ( <1 cm)
- 75 µm (0.003 in.) cursor resolution
MOHR CT100 Series High Resolution TDR Cable Testers
- As low as 60 ps system risetime (20‐80%)
- 75 micron (0.003 in.) cursor resolution
- 16‐bit digital sampling
Megger CFL535G Advanced Dual Channel TDR
- Comprehensive Dual Channel capability with dual aspect display.
- AUTO set up mode for instant use.
- Ultra fast pulse for near end fault identification.
Megger CFL535F TDR Time Domain Reflectometer
- Dual input and output ports
- 15 internal memory positions
- RS-232 interface to a PC or printer (included software)
Hipotronics CF70-12/-24 Primary Cable Fault Locator
- Self-Contained Unit Features Proof Tester, Burner and Thumper in One
- Burn Currents to 100 mA
- Impulse Energies of up to 7000 Joules
Hipotronics CF30-8-A Cable Fault Locator / Thumper
- Self-Contained Unit Features Proof Tester, Burner and Thumper in One
- Burn Currents to 50 mA
- Impulse Energies of up to 900 J
Hipotronics CF30/15-8C Cable Fault Locator/Thumper
- 0-30kV
- 50mA Burn
- Proof tester, burner, thumper in one self-contained unit
High Voltage Inc. CDS-2010U Cable Fault Locator
- Combination Hipot, Burner and Fault Locator
- Constant energy at each output voltage setting
- Adjustable thump (impulse) repetition rate, from 6 – 10 seconds