AEMC 8336 PowerPad III Three-Phase Power Quality Analyzer

The AEMC 8336 PowerPad III Three-Phase Power Quality Analyzer allows technicians and engineers to measure and carry out diagnostics and power quality work on one-, two- or three- phase networks. This device is able to measure DC volts, amps, and power. It offers 2GB of memory, with additional internal memory utilized for alarms, transients and snapshot data.

Product Info Related Compliance Standards Related Products

Inputs	4 Voltage / 4 Current
Sample Rate	256 per Cycle	12.8kHz at 50Hz		15.36kHz at 60Hz
Specification	Range	Measurement Range		Resolution	Accuracy (Typical)
Volt
Vrms (AC + DC)	1000V P to N 2000V P to P	2 to 1000V		0.1V	±0.5% Rdg + 200mV
Vpk	1414V	2 to 1000V		0.1V	±3% Rdg + 2V
Vrms Half Cycle	1000V P to N 2000V P to P	2 to 1000V		0.1V	±0.8% Rdg + 1V
Amps (accuracy excluding clamp accuracy)
Amps (AC + DC)	SR193 & MR193 MN193 5A MN193 100A	1 to 1000A 5mA to 5A 100mA to 100A		0.1A 1mA 10mA	±0.5% Rdg + 200mA ±0.5% Rdg + 2mA ±0.5% Rdg + 20mA
AmpFlex & MiniFlex	Range 100A Range 6500A Range 10kA	100mA to 100A 10 to 6500A 10A to 10kA		1mA 0.1A & 1A 1A	±0.5% Rdg + 30mA ±0.5% Rdg + 3A ±0.5% Rdg + 3A
Apk	SR193 & MR193 MN193 5A MN193 100A	1 to 1,414A 5mA to 7.017A 100mA to 141.4A		0.1A 1mA 10mA	±1% Rdg + 2A ±1% Rdg + 20mA ±1% Rdg + 200mA
Apk AmpFlex & MiniFlex	Range 100A Range 6500A Range 10kA	100mA to 100 A 10 to 6500A 10A to 10kA		1A 0.1A & 1A 1A	±3% Rdg + 600mA ±3% Rdg + 5A ±3% Rdg + 5A
A Half Cycle	SR193 &MR193 MN193 5A MN193 100A	1 to 1200A 5mA to 6A 100mA to 120A		0.1A 1 mA 10mA	±1% Rdg + 1A ±1% Rdg + 10mA ±1% Rdg + 100mA
Frequency	40 to 70Hz			0.01	±0.01Hz
Power
Watts (VA, var) P-Q-S	Probes: AmpFlex MiniFlex	10mW to 10MW 10mW to 10MW		4 digits min 4 digits min	±1% Rdg ±1.5% Rdg
Power Factor (Cos Φ/DPF)		-1 to 1		0.001	±1° for Φ, +5 cts for cos Φ
Energy
kWh (kVAh, kvarh) P-Q-S	1mWh to 9,999,999MWh (MVAh, Mvarh)				±1% Rdg
Harmonics	DC, 1 to 50
Volts & Amp %	f r Absolute V Absolute A THD	0.0 to 1500% 0.0 to 100% 0.0 to 1000V 0.0 to 1000A 0.0 to 999.9%		0.1% 0.1% 0.1V 0.1A 0.1%	±2.5% Rdg + 5cts ±2.5% Rdg + 5cts ±2.5% Rdg + 1V ±2% Rdg + 1A ±2.5% Rdg + 5cts
Phase Angle		-179° to +180°		1°	±1.5° +1°x(n/12.5)
Also display Energy loss, Flicker, Plt (2H), Pst (10min), Unbalance V% & A%
General Features
Programmable Alarm	Up to 40 types: 16,000 recorded max.
Transient capture	Up to 210
Snapshot	Up to 50 (screen BMP + all channels data)
Interface	Isolated USB, SD card slot accessible under instrument battery for direct transfer to PC, Dataview software for real time data, configuration and reporting included
Memory	SD card (SDHC compliant, not formatted) standard, for trend Data, Internal memory for In-Rush, transients and alarms
Display	Color TFT 320 x 240 (1/4 OFT) with graphic representation of system parameters and measurements
Real-Time Clock	Time and date stamp for Trend mode, Transient display, System Monitor and event capture
Power Supply	Rechargeable 9.6V NiMH battery pack, External charger
Charging Time	90 to 264VAC (50/60Hz)		6 hours approx.
Battery Life	>13hrs when display ON, 25hrs when recording with display OFF
Dimensions (L x W x H)	9.8 x 7.9 x 2.6” (250 x 200 x 67mm)
Weight	4.3 lbs (1.95kg)
Altitude Operating	2000m (6560ft)
Operating Temperature	32° to 108.5°F (0° to 42.5°C) ≤85% RH
Storage Temperature	-4° to 158°F (-20° to 70°C) ≤75% RH without battery
IP Rating	IP53 per IEC 60529
Safety	IEC/EN 61010-1 (1000V CAT III-600V CAT IV), IEC 1326-1

Measurement of TRMS voltages up to 1000Vrms AD/DC for two-, three-, four- or five-wire systems
Measurement of TRMS currents up to 10kArms (sensor dependent)
Measures up to 5000ADC with the AC/DC Current Probe Model J93
Frequency measurement (40 to 70Hz systems)
Records and displays trend data as fast as once per second for one month up to 41 variables
Captures up to 210 transient occurrences on all V and A inputs
Measures harmonics (referenced to the fundamental or RMS value) for voltage, current or power up to the 50th harmonic
Recording, time stamping and characterization of disturbance (swells, sages and interruptions, exceedance of power and harmonic thresholds)
2GB SD Card for Trend Recording memory; Alarm, Snapshot, Transient and Inrush stored in internal flash memory
Measures energy VAh, VARh & Wh
65µs/sample transient recording
FREE DataView® software is included for configuring real-time display and report generation