M Precision Laboratories EMC Pro Advanced EMC Test System

Discontinued

View Alternatives

The answer to manufacturers' demand for a mid-range, multi-capability EMC immunity tester, EMCPro® is easily configured to meet today's immunity standards required for CE Marking and compliance requirements. Operating via M Precision's easy to use Windows®-based PC software or from the front panel, it enables test engineers and technicians to run compliance-level EMC immunity tests in accordance with European Norm requirements. Portable and low cost, the EMCPro® is ideal for companies who require flexibility, versatility, and the highest test level-to-cost ratio instrument on the market.

The M Precision Laboratories EMC Pro Advanced EMC Test System was previously manufactured as the Thermo Fisher Scientific EMC Pro Advanced EMC Test System.

Product Info Related Products

Model PRO-SURGE
Surge per IEC 61000-4-5. Will do part of UL1449
Voltage Waveform	1.2/50µs
Peak Voltage	250V - 6.6kV ±5%, 12Ω Mode
	250V - 6.0kV ±5%, 2Ω mode
Peak Current	125 A - 3.3 kA ±10%
Additional 10 ohm Resistor	Software selectable
Repetition Rate	Up to 4 per minute
Open-circuit Voltage	Front time:	1.2µs ±30%
	Duration:	50µs ±20%
	Undershoot:	≤30%
Line sync accuracy	±15%, 50 - 277 VAC

Model PRO-EFT
EFT per IEC 61000-4-4 and ANSI
Voltage Waveform	5/50 ns ±30%
Peak Voltage	250V - 4.4 kV ±5%
Burst Period	300 ms ±10%
Burst Duration	15 ms ±20%
Frequency	1 kHz - 100 kHz in 0.5 kHz steps, ±10%
DC Blocking Capacitor	10 nF (internal)

Model PRO-RING*
Surge Ring Wave per ANSI and UL. Will do part of 61000-4-12.
Voltage Waveform	100 kHz damped cosine
Peak Voltage	250 - 6.6kV ±5%
Repetition Rate	<4/minute at 6 kV, faster at lower voltages
Open-circuit Voltage	Rise Time: 0.5µs ±30%
Short-circuit Current	Vp/Ip: 12 ohm ±3 ohm or 30 ohm ±8 ohm software selectable
*Pro-Telecom and Pro-Ring can not be installed together in the same unit

Surge Waveform Monitoring
Lines Monitored	Monitors are automatically switched to match the generator coupling mode
Open-circuit Voltage	1000:1 ±10%
Short-circuit Current Attenuation:	200:1 ±7%

Model PRO-HPOWER
Power Frequency Magnetic Field per 61000-4-8
Field Frequency	50Hz/60Hz
Field Amplitude	0.5-4A/m, in 0.25A steps, ±10% (with CM-HCOIL) up to 100A/m with the optional external HPOWER-EXT
AC Source	Internal
Resolution	0.25 Amp minimum
Coil Factor	0.65 to 1.00
Coil Resistance	0.05Ω maximum

Model PRO-HPULSE
Pulse Magnetic Field per IEC 61000-4-9
Field Pulse	8/20µs
Field Amplitude	100A/m -1000A/m, ±10%
Resolution	5A/m
Coil Factor	0.65 to 1.00

Model PRO-PQF
Dips and Interrupts per IEC 61000-4-11
Dips	70%, 40%
Interrupts	0% (short and open)
Transition Time	1µs - 5µs
Inrush	Minimum:	250 Amps @ 100V - 120V
	Minimum:	50 0Amps @ 220V - 240V
AC Voltage	50 VAC - 250 VAC, 50 Hz - 60 Hz
AC Current	16A Max
PQF Sync Output	5V signal occurs at each Dip or interrupt transition
Dip Duration	10 msec min at 60 Hz
	2 msec min at 50 Hz

PQF Waveform Monitoring
Voltage Input Connection	Fixed, L1 to L2
Voltage Attenuation	100:1 ±5%
Current Input Connection	Fixed, L1
Peak Current	Minimum 500A inrush into 1700µF
Current Attenuation	200:1 ±5%

Model PRO-BASE
System Voltage	90 VAC - 240 VAC, 50 Hz - 60 Hz
Integrated EUT Mains Coupler/Decoupler	AC Voltage:	1 phase, 50-250VAC, 50/60Hz
	AC Current:	16A max
	DC Voltage:	100 VDC max
	DC Current:	10A max
	Frequency:	50/60Hz
	EUT Connectors:	Nema, British, Schuko
	Control Interface:	RS232 Fiber-optic
	Safety Features:	External Interlock for users Interlock for CCL connector External stop input