EMC Partner AVI-LV3 Indirect Lightning Generator
- RTCA/DO-160G S22
- MIL-STD-461G CS117
- Cable Induction (CI)
M Precision Laboratories ECAT Lightning Test System Level 5
- Quick test setup
- Simple user interface
- Single stroke, multiple stroke, multiple burst, and pin injection in the same front panel
Haefely PSURGE 30.2 Modular Surge Test System
- Up to 30 kV impulse voltage
- Up to 30 kA impulse current
- Automatic polarity switching
Haefely AXOS5 Compact Immunity Test System
- 5 kV Surge
- 5 kV EFT/Burst
- Built-in 1 ph,16 A, 264 V CDN
Haefely AXOS8 Compact Conducted Immunity Test System
- 7 kV Surge
- 7 kV Ring Wave
- 5 kV EFT/Burst
Solar 2654-2 Lightning Transient Generator System for DO-160
- The controller and power supply module
- Waveform timing
- The high voltage power supply
EMC Partner IMU4000 Immunity Tester 4kV
EMC Partner IMU-MGE Conducted Immunity Test System
- Surge / CWG 4kV / 5 kV / 6kV / 8kV
- Ring Wave 6kV / 8kV
- EFT 4kV / 5kV / 6kV / 7kV
Teseq NSG 3150 Combination Wave Surge Generator | 15 kV
- Surge voltage up to 15 kV
- CDN range: Single & Three Phase, up to 63 A, 690 VAC, 1000 VDC
- Safest 15 kV connector type on the market
Haefely PSURGE 8000 Surge Platform Test System
- Built according to IEC/EN 61000-4-5 Ed. 1 & 2 and ANSI C62.41/45
- 1.2/50 µs open circuit up to 7.4 kV
- 8/20 µs short circuit up to 3.7 kA
EMC Partner CN-GI-CI-V Voltage Coupling Transformer for WF4/WF5A Coupling
- WF4 cable bundle test exceeding level 3 requirement (300V)
- WF5B can be coupled up to level 3 on single and multiple strokes
- Injection probe for WF4, WF5A (voltage) in cable induction mode
Teseq CDN 3063-S100 3-Phase Coupling/Decoupling Network
- Three phase models with broad current range up to 100 A
- Fully automated surge and/or burst coupling
- IEC and ANSI coupling methods
EM Test NX5 Multifunctional Test Generator
- 5kV Surge
- 5.5kV EFT/Burst
- 1 Ph 16A CDN
Thermo Keytek ECAT E103 Control Center
- Virtual Front Panel™ retains key operating parameters during set up & testing
- Multi-level system interlock architecture provides maximum safety
- Single output port/instant mode switching
Haefely VTM 15000/05 Impulse Transformer For Isolation Testing
- 1.2/50μs voltage impulse
- Output amplitude up to 15kV (PSURGE 8000 & PIM 100)
- Output amplitude up to 14kV (AXOS 8)
Compliance West MegaPulse Implantable Test 2 Surge Tester
- Peak Test Voltages: 140/270V
- Duty Cycle: 1 pulse per 20sec
- Line Voltage: 120V AC, 50/60Hz
Noiseken LSS-F02 Series Lightning Surge Simulator
- Conforms to the IEC61000-4-5 standard
- "Output voltage 15kV, current 7500A" which can conduct breakdown resistibility test
- "50% reduction of the output interval" which can drastically reduce the test time
EMC Partner IMU3000 Immunity Tester
- 8kV Surge
- 6.1kV Burst
- 300V Dips & Drops
EMC Partner IMU-MGS Conducted Immunity Generator
- One touch parameter editing in run state
- Impulse stability over long periods
- Intuitive multi touch graphical interface
M Precision Laboratories EMCPro PLUS EMC Test System
- Portable, mid-range EMC test system
- Resident capabilities for compliance testing to 6 IEC/EN standards
- Addresses ANSI/IEEE C62.41, ITU, ETSI, & UL 864 standards
Thermo Keytek ECAT E522
- AC CDN for three-phase lines to 480V, 32A/phase
- Surge Repetition Rate 1 shot/30 seconds @ <=10kV 1 shot/minute @ >10kV
- Open-Circuit Voltage: 1.2/50µs, 200V to 20.2kV ±10%
Thermo Keytek ECAT E521
- AC CDN for single-phase lines to 480V, 32A
- Surge Repetition Rate 1 shot/30 seconds @ <=10kV 1 shot/minute @ >10kV
- Open-Circuit Voltage: 1.2/50µs, 200V to 20.2kV ±10%
EM Test CSS 500N10 Surge Current Generator, 6 kV, 10 kA
- Wave Shape 8us/20us
- Output voltage (open circuit): 250V to 6,000V +/-10%, Step width 50V
- 250V to 6,000V +/-10%,
Teseq CDN3063-C32 Coupling/Decoupling Network
- 3-phase models with broad current range
- Fully automated surge and burst coupling
- IEC and ANSI coupling methods
EMC Partner AVI3000
- MIL-STD-461 CS117
- DO-160, Section 22
- All 6 waveforms in one unit, up to Level 3