California Instruments RS450 AC DC Power Source


Need Help? Call (800) 404-2832ATEC AssuranceWorldwide Delivery
California Instruments RS450 AC DC Power Source
Enlarge Image
California Instruments RS450
Request Quote Print Page
RS450 Datasheet
The California Instruments RS450 AC DC Power Source is a high-power AC/DC test system, offering 1000A at a low voltage level and 500A at a high voltage level.California Instruments RS power sources are equipped for a wide spectrum of AC DC power applications. Utilizing the innovative PWM switching technique, the RS series synthesizes robustness and functionality in a compact floor-standing chassis no larger than a typical office copying machine. This higher power density has been accomplished without sacrificing simplicity in the form of elaborate cooling schemes and additional installation wiring. Simply roll the RS unit to its designated location using the included casters, plug it in, and the RS AC/DC power source is ready to perform.

Program all instrument functions from an external computer thanks to the device's conformity to standards RS232C USB & IEEE-488, along with optional LAN remote control interfaces. The popular SCPI command protocol is used for programming. Optional External Drive (EXTD) allows external analog signal control of the source while in AC operation, essentially turning the source into a high bandwidth amplifier. The built-in output transient generation and read-back measurement capability of the RS Series offers the convenience of a powerful, and easy to use, integrated test system. The RS Series can be operated completely from its menu driven front panel controller. A backlit LCD display shows menus, setup data, and read-back measurements.

The California Instruments RS450 AC/DC Power Source is the fifth model in the California Instruments RS High Power AC DC Power Source Series.
 
California Instruments RS450 Features
  • High Power AC DC Power Source: Programmable AC DC power for frequency conversion and product test applications
  • Expandable Power Levels: Available output power of 90 kVA per unit and multi-unit configurations for power requirements up to 540 kVA and above
  • Arbitrary & Harmonic Waveform Generation: User defined voltage waveform and distortion programming
  • Regenerative, bidirectional "Green" Power Solution: Automatic crossover between Source and Current Sink power mode offers regenerative capabilities. Regenerate up to 100% of the rated output power back to the utility grid during sink mode operation. (-SNK option)
  • Remote Control: Standard RS232C & USB along with optional IEEE-488 & LAN Interfaces are available for automated test applications
California Instruments RS450 Specs
Model RS450
V Low 1000A
V High (Per Phase) 500A
 
Frequency Range 16-819 Hz
Phase Outputs 3 Phase, Neutral Floating, Coupling DC (except -HV and -XV Option)
Load Power Factor 0 to unity at full output current
Voltage Ranges V Low - 0-150V
V High - 0-300V
External Sense Voltage drop compensation (5% Full Scale)
Harmonic Distortion (Linear) Less than 0.5% from 16 - 66 Hz
Less than 1% from 66 - 500 Hz
Less than 1.25% above 500 Hz
DC Offset < 20 mV
Load Regulation 0.25% FS @ DC - 100 Hz
0.5% FS > 100 Hz
External Amplitude Modulation Depth: 0 - 10 %
Frequency: DC - 2 KHz