Gantner Instruments Q.brixx Portable Data Acquisition

Rent, lease, or rent to own Gantner Instruments Q.brixx Portable Data Acquisition
Enlarge Image
Gantner Instruments Q.brixx
Request Quote Print Page
Datasheet
The Gantner Instruments Q.brixx Portable Data Acquisition takes the performance of the Q.bloxx modules and delivers them in an integrated, rugged, scalable, and portable form factor. More than a dozen I/O module types are available allowing you to mix and match measurement features with your applications requirements. Each Q.brixx module is individually housed in a rugged aluminum housing that handles data acquisition up to 100 kHz per channel, channel-to-channel isolation (up to 1200VDC), sensor conditioning, filtering, linearization, and conversion to engineering units, all at the I/O measurement level. The integral Q.gate test controller handles the data synchronization, buffering, time stamping, and communication to the automation system or PC over Ethernet (TCP, UDP, Modbus, etc.). The overall result is a portable measurement system that's up to the test.
 
Modules:

A101: Universal Analog Input Module
• 2 universal analog input channels: voltage, current, resistance, potentiometer, Pt100, Pt1000, thermocouples, measuring bridges, IEPE-sensors
• Fast high accuracy digitalization: 24 bit ADU, 100 kHz sample rate per channel
• 1 digital in or output per channel: input: state, tare, memory reset output: state alarm, thresh hold
• Signal conditioning: 16 virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
• TEDS: class 1 and class 2, according IEEE 1451.4
• Galvanic isolation: of I/O-signals, power supply, and interface Isolation voltage 500 VDC

A104: Multi-Channel Thermocouple and Voltage Measurement Module
• 8 galvanic isolated input channels: thermocouples and voltages in the range of ±80 mV Isolation voltage 100 VDC
• Cold junction compensation: TC measurements possible in differential mode or with the addition of a cold junction compensation connector
• Dynamic linearization: optimized positioning of the interpolation points within the selected range, type B, E, J, K, L, N, R, S, T, U
• High accuracy digitalization: 24 bit ADU, 100 Hz sample rate per channel with 8 active channels, sum sample rate 800 Hz
• Signal conditioning: digital filter, average, scaling, min/max storage, arithmetic, alarm
• Galvanic isolation: of I/O-signals, power supply, and interface Isolation voltage 500 VDC

A107: Universal Analog Input Measurement Module
• 4 universal analog input channels: voltage, current, resistance, potentiometer, Pt100, Pt1000, thermocouples, measuring bridges
• Fast high accuracy digitalization: 24 bit ADU, 10 kHz sample rate per channel
• Signal conditioning: 16 virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
• Galvanic isolation: of I/O-signals, power supply, and interface

A109: Universal Analog Output Module with Digital I/O's
• 4 galvanic isolated analog output channels: voltage ±10 V, current 4…20 mA selectable Isolation voltage 500 VDC
• DAC-resolution 16 bit: 100 kHz with 1 channel, 10 kHz with 4 channels
• 4 digital inputs and 4 digital outputs: configurable as 2 counter, 2 frequency, or 2 PWM inputs, 2 frequency or PWM output, state in or output
• Frequency in and outputs: frequency measurement up to 1 MHz (Chronos method), frequency output up to 10 kHz
• Counter: For/backward counter, quadrature counter with reference zero recognition (reset/enable), up to 1 MHz
• PWM in and output: measurement of duty cycle and frequency, output with variable frequency and/or duty cycle
• Outputs freely scalable
• Galvanic isolation: of I/O-signals, power supply, and interface Isolation voltage 500 VDC

D101: Digital Input and Output Module
• 8 digital inputs and 8 digital outputs: configurable as counter, frequency, PWM and time inputs, frequency or PWM output, state in or output
• State in and outputs: process- and host controlled
• Frequency in and outputs: frequency measurement up to 1 MHz (Chronos method), frequency output up to 10 kHz
• Counter: for/backward counter, quadrature counter with reference zero recognition (reset/enable), up to 1 MHz
• PWM in and outputs: measurement of duty cycle and frequency, output with variable frequency and/or duty cycle
• Time measurement
• Galvanic isolation: of I/O-signals, power supply and interface Isolation voltage 500 VDC

Additional Modules:
  • A102 Bridge Sensor Measurement Module
  • A106 Universal Bridge Measurement Module
  • A108 Multi-Channel Module for Dynamic Voltages
  • A116 Bridge Input Measurement Module
  • A123 High Isolation Input Module for Voltages
  • A124 High Isolation Input Module for Thermocouples
  • A128 High Isolation Input Module for Dynamic High Voltages
 
Gantner Instruments Q.brixx Features
  • High-Speed/High-Resolution: 24-bit @ up to 100 kHz sampling (per channel)
  • Universal Signal Interfaces: All Signal and Sensor types supported
  • Full Isolation and Conditioning: Up to 1200 V isolation, filtering, linearization
  • 2 to 256 channels per Q.brixx: Each Channel Completely Configurable
  • Ethernet/EtherCAT Controller: Synchronization, Recording, and Programming